VLAN will not work on Interswitch link SLM2008 SRW2008MP
I have a SLM2008 (SW01) and a SRW2008MP (SW02), these are inter connected both on port g1. G8 SW01 port is connected to the HDSL modem my ISP (off-grid). Connected G2is inside an ASA5505, offering my inside of network port. G7 and g8 SW02 port is connected outside 2 servers. I created a VLAN 2 on both switches. SW01 has 2 PVID on port 8, Acceptable frame types = All and enabled the capture filter. All other ports has same config except PVID on these are 1.
On SW02 I tried several setting of VLAN on ports 1, 7 and 8. NO CHANCE!
In general, I tried g1 as trunk, joined the untagged VLAN1, VLAN2 tagged, Acceptable frame types = All, PVID = 1, penetration fltering on. Ports g7 and g8, I tried with the access mode both in general mode, with several combinations of tag/untagged etc etc.
I am not able to pass all traffic to the outside.
Anyone? Help.
Thanks in advance
HKL
Basically, what I want to achieve is; using a vlan between the 2 switches create a topology as if I had 4 physical switches, connected 2 and 2. No traffic should pass between the 2 pairs. No servers or other resources should be informed (or care) if they are on the physical pair 1 (VLAN1) or physical to pair 2 (VLAN2).
As I see, or understand, the only difference between 4 physical switches and 2 physical (using the VIRTUAL local area network), it is that we need two trunk VLAN through, instead of having 2 physical connections intercommutation
All outside routing is handled by the ASA (from vlan1) to VLAN2, the server will be directly using public IP address.
In a concern for information inside subnet is 192.168.1.x, NAT by ASA at the public address 62.89.36.34/24 outside VLAN2 will be directly connected and use the servers 62.89.36.45 and 62.89.36.46
GW = 62.89.36.33
Hope this will make sence?
BR
JK.
Tags: Linksys Switches
Similar Questions
-
some links on ebay will not work, but works with internet explore
The upper arms on a web page will not work. Tried on ebay and even your web page. Other links on the page seem to operate only those near the top of the page. The mouse does not recognize them in links. Was working before. Fine links using work internet explore.
If the inoperable button or the link is to the top of the page...
Recently, the Yahoo toolbar and the extension of Babylon have been reported because of this problem. They appear to overlap invisibly on the top of the display of the web page. If you have one or both, uninstall or disable them/it or see if an update is available that solves the problem.
- See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
- See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
- See-> http://kb.mozillazine.org/Uninstalling_toolbars
If this does not resolve the problem:
- See Troubleshooting extensions and themes
- See-> Troubleshooting plugins
- See-> basic troubleshooting
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
On any web page (Facebook, Yahoo, this page), the links at the top of the page do not work. Hot spots seem dead. To this page of computer desktop/laptop/Firefox home links will not work.
The Yahoo toolbar causing declared. Disable or uninstall.
-
Uninstalled CC back to CS6, now dynamic links will not work!
Just uninstall Adobe Premier CC and CC of hearing that I again use CS6. Now my dynamic link between the 2 programs will not work. What should I do? Help, please.
Cloud of reading takes up https://forums.adobe.com/thread/1584746 for some ideas
-
I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?
CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html
-
How can I recover my old firefox after I replaced it, it told me a new will not work?
I was on my AOL Homepage and was encouraged to be upgraded for increased security. Everything went well, but when I tried to open Firefox, I learned it wouldn't work. Usually, with this older system, I am notified when an upgrade will not work. I would have never taken the lead and replaced my old if I knew. Is it possible to recover my old Firefox?
There are apps that I have on this old system that does not work on newer systems. (I have an Airbook updated but I like the big screen for some things). I found this on Google:
https://support.Mozilla.org/questions/970943
Mozilla
September 11, 2013 - where can I find older versions of Firefox, which runs on OSX 10.5? ... because Firefox 16 is the latest version of Firefox that works with Mac...
and downloaded Firefox 16 of their link. It seems to work. For security reasons, I use my Airbook for bill payment, etc.
Thanks for your comments. Thank you very much for the quick responses. -
Portege M750 Win7 64 bit Wireless Manager (3G) will not work
I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.
I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.
I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.
The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.
Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.
But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.
I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.
I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.
I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.
I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):
Model name PORTEGE M750
Part number PPM75E-00N017EN
Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
Version of the BIOS Version 3.00
Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
Physical memory 4096 MB RAM
Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
Internet Explorer 8.0.7600.16385This indicates a BIOS problem?
-don't
points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.
I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well
-
HP psc 2510 photosmart driver will not work
I recently bought a new HP all-in-one, so I gave my old all-in-one for a friend. It's a HP psc 2510 and I'm having a problem installing the printer driver on their PC. Windows XP
I tried to use the original CD supplied with the printer (version 3.1.1) as well as the version of the entire network and the basic version of the site hp.com (version 4.2.1). In all cases, the results are the same. The program will not work.
In the case of the downloaded version, I see the files extract to a temporary location until 100% then nothing happens once completed. With the original CD when I run the setup.exe screen flashes and then nothing happens.
I don't know how to solve this. I wonder if Microsoft changed something during a Windows update that affects this installation?
I tried the version CD and downloads on 2 other PC with the same results. I even downloaded the XP on a Vista PC version to see if it would go at least after the extracted files and they do not have.
Can someone please download the driver for this printer on their PC and let me know if it runs once it has extracted all the files? Maybe HP has a file corrupted on their site?
Here is the link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228 & lc = on & cc = us & dlc = in & sw_lang = & product = 30377...
I solved the problem!
Here is the solution I used: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software/gc-w01-enu-nb-exe-extracts-to-100-but-setup-fails-instantly-in/td-p/1140125
-
HP Support Assistant will not work.
Desktop HP Pavilion HPE h8-1020
Win 7 64 bit,
HP Support Assistant will not work. I get the following:
HPSF.exe has stopped working, the application has encountered a problem and needs to close
I downloaded and installed the latest updates, but it has not fixed the problem.
Can someone please help?
Thank you
Hello
Try the following
Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the computer.
Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.
http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html
After installation, restart the computer again.
Kind regards
DP - K
-
LaserJet 1018 will not work on windows 7
I have a HP Laserjet 1018 which works fine on Windows Vista 64 - bit. I just built a new PC and put Windows 7 Home Premium 64 - bit on it. The drivers on the HP support site will not work. When I try to print something, it is sent to the printer and disappears. I interrupt printing that document actually get sent to the printer and it appears. As soon as I have some Nations United-pause the printer, the document disappears, but nothing prints. Normally, when something is sent to the printer, the "information" LED yellow lights up momentarily and prints the document. The led does not at all. I tried new cables, uninstalling and reinstalling etc. Nothing works. Just to be sure this isn't a printing problem general, I connected a Laserjet 1020 on the new machine and it works fine. However, it is my printer to work and I can't leave it on the new computer, which is a personal computer for my home. It worked to identify that my copy of Windows 7 allows you to print, but is not a long-term solution. Help?
Hello
Thanks for the post. On this one, I have some ideas. I pasted the links below. One is for the driver Win7/64 page and the print diagnostic utility. I would certainly recommend the utility to narrow down the issue. The other is a related document in queue which contains excellent information. Good luck!
-
"Heroes of Might and Magic V" will not work
Hello, I have recently updated to Windows XP SP3 to Windows 7 and now my game "Heroes of Might and Magic V" (by Ubisoft) will not work. It worked fine in Windows XP, but now when I try to start the game, I get an error message saying that the program has encountered a problem and needs to close. Why does not the game works? I tried to run in Compatibility Mode, but nothing helped. Nothing about what Windows 7 tent will not work. I ran the program compatibility problems and may not solve my problem. Please help me.
Necropaxx,
For any software that you plan to install with Windows 7, you can check the compatibility here: Windows 7 Compatibility CenterIt seems that Heroes of Might and Magic V is always tested with the proponent to ensure compatibility. You can try running it in compatibility mode. This link will give instructions about this:make programs run on Windows 7
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?
Hi PTTimothy
1. what operating system is installed on the computer?
2. you are the administrator of the computer?
I suggest you to check and to provide us with the information about the installed operating system.
Step 1:
You can open the administrator and verify if you can open Windows Easy Transfer correctly.
You can even check if you face the same question in the user account different or new user account. You can create a new user account on your computer, and then check.
Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountStep 2:
An analysis of the SFC and audit-
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833I hope this helps.
-
The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
The version of this file is not compatible with the version of Windows that you are running.
I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
Maybe nobody knows what could be the problem?Hi Hal K,
Thank you for visiting Microsoft Answers.
If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.
If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.
You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows
http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions
Swati K - Microsoft support technician
Visit our Microsoft answers feedback Forum and let us know what you think. -
My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP
Hi John4452,
1. you remember to make changes to the computer, after which the issue started?
I suggest to try the steps from the link to the following article and check to see if it helps:
Troubleshoot failures to find the new LifeCam hardware
I hope this helps.
-
System Restore will not work
Hi FriendFriend,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
3. you receive an error message when running the system restore?
I suggest that you put the computer in a clean boot state, and then try to clean boot.
It is possible that some third-party programs installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If the previous step fails, then view the event logs to examine the system restore service errors.
(a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.
(b) click on the category System .
(c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
http://support.Microsoft.com/kb/302796
Procedure to view and manage event logs in Event Viewer in Windows XP
Maybe you are looking for
-
Update of Safari keep crashing on iPad2 race 5.1.1
Safari crashes on the iPad2, updated 5.1.1 running. It indicates that the software is up to date.
-
I've lost the ability to see wireless connections that are available or contact them.
for some reason, I lost the ability to see the available wireless connections or communicate with them. We have installed a new modem/router with WiFi and I do not see our network OR any others in the region. How to bring back this ability? origina
-
Go to Windows 7 32-bit to Windows 7 64 bit
I just got my X 201 tablet from Lenovo with Win 7 32 bit installed retailer. The system has 2 GB of RAM, but I have another key to 2 GB I want to insert and would like to switch to Win 7 64 bit to be able to use all of it. I don't want to do a clean
-
Not be able to share files and folders over a network home
I am more able to share files and folders across a network, consisting of a Windows 7 and Windows XP computers, and a Samsung TV. I have a number of files and folders that I can see on all devices. I followed the process of file sharing in Windows 7.
-
Curve Smartphones blackBerry 3G fail update
Nice day Who can help me. I have a Blackberry Curve 3 G / 9300. I want to upgrade the software to OS6. When I'm trying to update, he caution me only active users can only update the software. How can I fix this thing