VM does not far from data store

Similar Questions

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

  Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

  Nobody here can help, and Apple will not help you to overcome the blocking of activation.  If the seller does not cooperate and remove the unit from their iCloud account, then you will never be able to use this device yourself.

  See disable find my iPhone Activation Lock - Apple Support

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Lenovo s g80 touchpad does not (far left, to be more precise on the thick part of 5 cm), the cursor moves sometimes

  A part of the my s g80 lenovo touchpad does not (far left, to be more precise on the thick part of 5 cm), the cursor moves sometimes, bought this tour only 2 weeks before. I use especially the usb mouse, so never experienced this problem before, I do not know if it is still there since I bought. I contacted lenovo saying this problem, they asked to reinstall the driver for the touchpad from the link given, the problem persists and they claimed his driver with w7 incompatibility and reinstall the operating system? Please say a solution for this problem, I can't change the os now :(

  Lenovo/support forums is the place to ask, its their software/driver.

  Unless of course you make the mistake of using windows update for drivers, if so try to make back the driver, or reinstall on the Lenovo support site

• My episode does not play in the store

  My episode is not playing in the store, but it's as a Subscriber.  The circle of game/load just continues to blink.

  My podcast is connections with Craig Sherman.

  Your feed is at http://feeds.feedburner.com/ConnectionswithCraigSherman

  There are three elements in your workflow: only the third is a media file playable. Appears when subscribing but does not play in the store within a reasonable time.

  The URL of your file is a Google Feedproxy one and if it works well in a browser it redirects to a URL of Google Drive. Google Reader is not a place appropriate for your media files - it has always caused problems and I advise you to find another host.

• I can't tp perform actions on email or some Web sites because the pointer does not change from a helping hand on all orders at the top of a page - any more down works fine

  In Hotmail, for example, I can open any message in the Inbox except the top one, but then I am unable to answer or to take further action because the symbol of the pointer does not change from a helping hand and clicking on has no effect.

  If I try to open the top message from the page by clicking on the command "Open" is gray.

  If I open the type of web page that has a number of menu items at the top of the page, I can't open anything either for the same reason - something more to the bottom of a page is fine. The type of Web site with menus on the sides can be used for all items except the top menu!

  Help!

  Concerning

  Brian

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported because of this problem. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• Re: Win XP does not recognize the art Store 1TeraByte external HARD disk

  my xp does not recognize the art Store 1TeraByte external HARD disk.
  In the past he woked fine.

  I tried to connect it to another computer with XP and it works very well.

  If I understand well there is no driver to download for this disc. It is plug ' don't play.

  There is no massage.
  other devices that I connect to USB also works very well,

  Thanks for your help.
  Eitan.

  Hello.

  You tired to update the chipset drivers?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• Portege R100 - does not start from CD player

  I have Toshiba Portege R100. I want to format and start all over again

  I use killdisk, excellent utility program, normally takes place the disc cd but the machine does not start from cd player, even when it is said in the bios, it says 'error of cable' & drive still works fine when the system is installed & running

  I want to remove unbuntu & just xp, thought that I would start plus-plus easy or simply to remove unbuntu?
  If remove unbuntu, how can I do this?

  Best regards, TIM

  Hey Buddy,

  If you want to have XP only, try to boot from a XP disc. You can format the drive HARD whole with XP disc that even Ubuntu is installed. I put t understand why you use another program to format the HARD drive

  Then boot from a XP disc and follow the instructions on the screen. If it doesn't work, it seems to be the material of your player to malfunction.

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• Calendar Gadget has all orange background and does not show any date information

  My calendar gadget all orange background and does not display the date information. I tried the various help and resets listed in the site support, and also through a search engine search.  No solution that was out there was again active. I tried to reset the file .dll, re-installed McAfee, closed, deleted and re-installed the gadget.  I'm running to do a total reinstall of Vista (not), but I don't really want to do this for a simple gadget. I don't know that there is a difficulty there. I have install a registry cleaner and then uninstalled it, but I don't remember the name of the program. Thoughts?

  It is a few extra for support measures to...

  This behavior is observed if the XML registration is missing in the system. To resolve this issue, follow these steps:

  • Close the Windows Sidebar . To do this, right-click on the Sidebar icon in the Notification area, and then clickoutput (GK: in the case of Windows 7, press Windows key + R > typetaskmgr and press enter > Proccesses tab > selectsidebar.exe > click on the end process button)
  • Open an elevated command prompt window. To do this, clickStart , click principally made programs , Accessories , right-clickguest , and then click run as administrator .
  • In the command prompt window, type the following command and press ENTER:

  regsvr32 msxml3.dll

  Similarly, run these commands:

  regsvr32 scrrun.dll

  regsvr32 jscript.dll

  If the registration was successful, you will see the message DllRegisterServer in succeeded to for each executed command. OpenWindows Sidebar (sidebar.exe ) and check if the problem is resolved.  You will need to disconnect and reconnect your user account to check if the issue has been addressed.

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• Does not display the data of Apple users in PDF format

  Hello

  We have created a form using Acrobat 9.  The form can be completed and saved, so people can send to us.

  Whenever I receive a form someone who uses an Apple, the characters they typed, do not appear in the boxes unless you click on the area where the data should be.  It does not print the data either.

  For example, let's say I have the part of the form where people with type a paragraph.  When they e-mail form more, it is empty... unless I click on the box that the data is, they, it turns out.  This only happens with Apple users.

  You have any ideas on why this is and how to fix?

  Thank you!

  Dave

  In Acrobat 9, you would select: forms > manage form data > export data

  export, and:

  Forms > manage form data > import data