VM in ignorant hard error auto start

Similar Questions

• Satellite M30: Unknow Hard Error - could this be a problem of hard drive?

  I got my Satellite M30 for 2 years now and it never gave me any problems, until a few weeks ago. The problem started shortly after I put Windows to SP2, when I played a game it would stick for a minute or two, and then continue on as usual, the problem slowly got worse and started blue screening with "Unknown hard error" and sometimes strange balloon in the lower right corner saying unknown hardware error and then freeze it. It also took a long time to start and generally do nothing.

  Assumed it was a problem when I've upgraded to SP2, so I decided to reinstall Windows and start over again, update the BIOS while I was home.

  Once this is done it seemed fine for an hour or two, but then tried to install a game and of course, the good old blue screen appears and the whole problem starts again.

  I took it to a repair shop and explain the problem and I had re-installed Windows nothing helped, and I suspected that it may be a hardware failure, I left it with them, and 2 days later I get a call saying its all fixed and ready to be picked up, I asked what was wrong with it and they said that they re-installed Windows and sound now works fine (i.e. what I their) I said, I had made and n t worked!). I picked up (and got charged £40 to have done what I had already done). I got it home and everything seemed ok... for a few hours, then blue screens seemed to tell me any physical dumping of beginning and the usual stuff.

  I think it might be a drive problem hard, like when I tried to install a game on it at night last light CD and HARD flash drive, one for about 15 seconds, then the other for a short time, data copied from one to the other, but then the HARD drive light stayed on, and I could hear the HARD disk as if it were sticky , after about a minute of this blue and close short-listed and took some time to turn back. If I leave a couple of hours and it starts fine until the next time.

  So, after my long description on my problem, I have 2 questions,

  1. could I be right in thinking that these problems are associated with hard drive?
  2. If I'm right, is easy to replace on the M30 HARD drive and where I would buy a new?

  Thanks for your time and help,

  Kenny.

  Hello

  The blue screen appears only if you play games?

  But I agree with you. In my opinion, there would really be a hardware malfunction.
  The question is - it s a HARD drive or something different?
  Hmmm. I think that the problem is not related to the disc HARD but maybe overheating?
  According to the publication, sometimes when you play games. The game is a high performance application. All devices running with maximum performance and produce heat.

  I m not 100% sure, but maybe the high temperature has a bad influence on the system and therefore the BSOD happens.
  You suggested that the laptop run properly for about 2 years. Maybe fans can cool properly because of the dust and debris. Two years is a long time if you have not cleaned the cooling modules and fans.

• STOP: c0000221 Unknown Hard Error\Systemroot\System32\ntdll.dll

  I have a Dell Vostro 1500 running Windows XP Home edition.  During the Windows boot the system falls down and shows the error in the title above. I replaced and improved hard drive and modules memory live with Dell components and tried to launch the system to start disk.  Same result screen, blue with the unknown hard Error\Systemroot\System32\ntdll.dll STOP: 0000221.  Then new hardware configuration and system bootable drive equals the same result.  Any advice will be appreciated.

  Thank you, everyone, for all the good advice and help. Interestingly, I used a reinstall drive different (one for the same version of Windows XP SP2), and it worked fine. I think this would indicate that the original disk could have been the cause of the problem, but I tried to install the operating system with this drive just to be safe, and it worked. It should be noted that I did no changes to the machine until I tried the new disk, then retried first that I tried to use to reinstall the operating system. This suggests that, regardless of the problem, he don't has not been caused a constant problem.

• We get answerSTOP: c0000221 Unknown Hard Error\SystemRoot\System32\ntdll.dlls

  My Dell crashed.   When I try to restart, it will start not (in any mode): can't go in Safe Mode or last mode of work or other.   I managed to get to the blue screen and I saw the following: STOP: c0000221 Unknown Hard Error\SystemRoot\System32\ntdll.dll

  I did some research that says I can try to reinstall / Windows XP Recovery and that this could make it work
  I have all the original disks.
  Can I use the Microsoft XP disk and how can I reinstall without wiping my hard drive (I'm terrified by wiping my hard drive)
  The manual of Dell said to insert the Windows XP installation disk and I have the ability to REPAIR, not REINSTALL
  Will this work?
  Another site indicates that the problem is that the drivers are up to date...  I can't update because the PC is not connected to the internet
  Help, please

  Hi Niallmcardle,

  I suggest you follow steps from Microsoft Knowledge Base article and check if it helps.

  A Stop: 0xc000026C or Stop: 0xc0000221 "Unable to load device driver" error occurs when you start Windows XP

  http://support.Microsoft.com/kb/315241

  I hope this helps.

• Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Hi Comintern,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

   

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know the results.

• Explorer.exe has errors on start up that invites a temporary office to use. Vista was preinstalled, so I don't have a version of re - install?

  Explorer.exe has errors on start up that invites a temporary office to use. Vista was preinstalled, so I don't have a version of re - install?

  Hello

  Any manufacturer should provide a means of recovery, it is more often to another partition on the hard drive which is accessible at startup. See your documentation for instructions to access or post with the brand and model of your system for instructions.

  As for the error, it means that you have a corrupted profile and these cannot be fixed. What you need to do is to connect to another administrator account and create one for yourself. Log in there and copy your personal files before deleting the original. The process is described in this article: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How can I fix an error on start up: can not find the resource file?

  After that a false spypro virus was found and deleted I got the above error message when starting upwards.  How can I fix?

  Hello

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• Avalibale features in the free ESXi version - auto start the virtual machine and scripts shoutdown?

  Hey all,.

  Evaluating 60A expired on my ESXi (5.0.0.623860) host which runs a couple of virtual machines. Virtual machines have been setup to autostart when the host said, but now the assessment is complete, the virtual machine no longer autostart.

  In addition, I ran a simple scipt using PowerCLI. This was shot issue a stop host command, which in turn stop the gracfully VMs, then stop the host: the script command were:

  Connect-VIServer -server mysESXiHost -User root -Password xxxxxxx
  Stop-VMHost mysESXiHost -Confirm:$false -force
  

  If I run these commands from the PowerCLI confirmation, I see the following error message:

  Stop-VMHost : 08/12/2012 17:01:52    Stop-VMHost        fault.RestrictedVersion
  .summary
  At line:1 char:12
  + Stop-VMHost <<<<  mysESXiHost -Confirm:$false -force
      + CategoryInfo          : NotSpecified: (:) [Stop-VMHost], RestrictedVersi
     on
      + FullyQualifiedErrorId : Client20_VmHostServiceImpl_ShutdownVmHost_ViErro
     r,VMware.VimAutomation.ViCore.Cmdlets.Commands.StopVMHost
  

  What I read, I thought that current same ESXi of execution in the free license must always let these things happen, or am I wrong?

  Chris

  There are two things to note:

  (1) the fault of . RestrictedVersion.summary details can be found here http://www.virtuallyghetto.com/2011/06/dreaded-faultrestrictedversionsummary.html

  (2) regarding Auto Start, fairytale look here http://blogs.vmware.com/vsphere/2012/07/clarification-on-the-auto-start-issues-in-vsphere-51-update-1.html

• Lightroom plugin auto start

  I am trying to write something like a plugin of statistics for Lightroom. I need the plugin so that it starts automatically without user intervention (after all I'm collecting statistics which should be an automated process). I have read the API, but I have not found a way to do it. I tried adding executable code in Info.lua but it is limited (it cannot be used to import so I can't get Lr * but only the channels). I tried to use the LrEnablePlugin, LrInitPlugin, but they are called only when manually the plugin from loading/reloading or opening the Plugin Manager. I am of ideas, unless there is a more robust way to write extensions for the basic product.

  Yet, I have not found a system of events in the API. It is good to know when a photo is edited, imported, rating, etc. I think of two ways to overcome this - all first way is to intercept the functions so that they call a function defined by the first user (for example getAllPhotos to call getAllPhotosCallback first, then the original getAllPhotos) but this account on the assumption that Lightroom itself uses these functions rather than being only interface functions; the other way is to use a publication service.

  Actually, the problem of auto-start is a "show-stopper". Without overcoming the whole plugin would be useless.

  PS: Sorry for reposting, I already posted in the general forum Lightroom. I don't have this one exists.

  Thanks in advance,

  Marin

  Mix in an element of custom metadata (hide if you can't use it) and LrInitPlugin will be called when Lightroom first startup - you can then do pretty much what you want in a background thread - no event but you can query... Just be aware that access write catalogue in a background thread can have collisions with other plugins, I use this to access the catalog, so no problems:

  --[[
  Synopsis: Wrapper catalog access that distinquishes catalog errors in claim to target function errors.
         
  Remarks:-returns immediately to target error.
        
  -The purpose of this feature is so many simultaneous jobs can access the catalogue in succession without error.
                             
  Func is a function of catalogue with-do
  the cat is the catalog object.
  P1 is the first parameter, which can be a function, an action name, or param table.
  P2 is the second parameter that will be a function or zero.
         
  Returns: itsAGoOrNot, andWhatever.
  --]]
  function RcUtils.withCatalogDo (tryCount, func, cat, p1, p2)
  While (true)
  for i = 1, tryCount
  local STS, qual is LrTasks.pcall (func, cat, p1, p2)
  If m then
  Returns true, qual
  else if RcString.is (qual) then
  local found = qual:find ("LrCatalog: with ', 1, true) or 0 - back position or zero, rather than position or zero.
  If found == 1 then - problem reported by with-catalogue-do method.
  local found2 = qual:find ('already inside', 15, true)
  If then found2
  -a problem with the affirmation of access catalog.
  If the development of RcUtils._debugMode then - module debug.
  LrDialogs.message (' cat assertion: '...) RcLua.toString (qual))
  ElseIf RcUtils.debugMode then the way of debugging the application to scale - verbose log - user
  RcUtils.logWarning (' cat assertion: '...) RcLua.toString (qual))
  on the other
  LrTasks.sleep (math.random (. 1, 1))-sleep for half a second, and then try again.
  end
  on the other
  -LrDialogs.message (' not already inside cat: '...) RcLua.toString (qual))
  return the value false, qual
  end
  on the other
  -LrDialogs.message (' not a cat with msg: '...) RcLua.toString (qual))
  return the value false, qual
  end
  on the other
  -LrDialogs.message ("bad cat m, but no msg.")
  return false, ' an unknown error occurred catalog for access to the.
  end
  end
  local action = RcUtils.showWarning ('Unable to access catalog.', 'Persistent', 'Give Up')
  If action == 'ok' then
  -keep trying
  -LrDialogs.message ("will try again.")
  on the other
  -assert (action == 'Cancel', ' unexpected error action: "..." ") RcLua.toString (action))
  -LrDialogs.message ("Gave up trying access to the catalog.")
  return false, "Gave up trying to access catalog."
  end
  end
  -RcUtils.logError ("Unable to access catalog.") -What is set in the context of appeal.
  -LrDialogs.message (LOC (' $$$ / X = impossible to access catalog after ^ 1 tent. ', tryCount))
  return false, LOC (' $$$ / X = impossible to access catalog. ")
  end

• How to ignore the error in adpatch?

  Hello
  I'm new to adpatch... an error occurred while adpatch... adpatch said to correct the problem, so that the handler can continue... but metalink told to ignore this error... can someone give me how to stop adpatch and ignore the error? Please give me the procedure

  Hello

  This is the link that tells me to ignore the error...

  https://support.Oracle.com/CSP/main/article?cmd=show&type=not&DOCTYPE=problem&ID=1066653.1

  That's what shows... IMPOSSIBLE: folder jtfdiagresp.ldt worker 3.

  What should I do with this worker

  If the case is applicable to you, then start a new session user applmgr, source of the env file and issue "adctrl" application, then select (Option 8 - hidden option) and say the failed worker (worker 3) to ignore the work.

  Thank you
  Hussein

• How to stop Auto-start for videos

  Videos in Safari auto-start now. I would like to stop this function.

  It is a function of the site, so it is not that you can do.

• HP stream 11-d010wm: I have a hard time to start the system it asks me the password for administrator password or power

  I have a hard time to start the system he asks me the password for administrator or power password which I don't have
  
  This is the code that I get when I entered the wrong password 3 times-(56448130) I would be grateful help
  
  Thank you!

  @dj_infiel95

  Enter 49520116

  Kind regards

  DP - K

• How to ignore the error S.M.A.R.T. for El Capitan update?

  I have a disc with a Smart error. In my particular case, I know that it is relatively safe to continue to use my drive. I have error SMART attribute #173 (level of wear), but all these block replaced is arrived in the small volatile temp score, my main system partition is sure. In short, I know what I'm doing.

  I want to ignore this error and to force the update. How to do this?

  If you think it's worth, you can try to format the drive. I don't know any way to force the installer to ignore the error.

• Toshiba 32L 4363: missing DLNA + video auto-start

  Hello

  I have some problems with my new Toshiba 32L 4363.
  As I have read on the homepage L 32, 4363 should support DLNA, but I can't find the function.
  Where can I find it?

  There are a few pages where I see a lot of applications to play videos, pages like YouTube.
  The problem is that some of these apps are starting to play even if I hadn't started the app apps start automatically. How can I disable this?

  Videos from a USB USB also begins to play when I chose the videos in a small windows on the right side, but did not press on enter on the remote control.
  I don't like this feature. How can I disable it?

  In the manual (also the web - the toshiba manual - om .net) I couldn't find anything about it.

  mellimelli

  According to the specifications of the TV, the device is DLNA certified.
  This means that you can share movies, videos, music and photos on your TV Toshiba or with DLNA using a DLNA certified media server on your network home.

  I recommend checking the manual start of the user to page 45

  The TV can be configured as a digital media renderer (DMR).
  When using as a media converter, the TV displays content provided by a multimedia server.
  The media selection is made by the media controller.
  The TV can play photo, movie, or audio files when using as a Media Converter.
  In the network menu, select Network Device Setup and press OK.
  Select Media Renderer and press b to select on.
  If demand media controller, prompt and the function of Media Converter will start.

  According to the USB Autostart support: what is mentioned on page 61
  When Auto-start is enabled, you will be asked if you want to start the media player each time that a
  Peripheral USB is inserted. If autostart is disabled (or if you want to connect to a media server on the network), you must manually start the Media Player menu.

  To change the auto-start setting: highlight the Options icon and then select Configuration of Media Player
  and press OK. Select USB Auto Start, and then press OK. You can then select enabled or disabled.

  Start_ sent
  Insert a USB device into the USB port on the left side of the TV. A prompt is displayed. Select Yes, then press OK. Videos, music or Photos and click OK. Then select devices and press OK.

  * NOTE: * If autostart is set to Off, you can manually start the media player.