Buon giorno a tutti,

VI sewn by ask cortesemente supporto pole e ore ore dopo di troubleshooting not ho trovato soluzione al problema...

problema molto molto strano presso una struttura con ho VSPHERE KIT BULK dotata di 2 nodi esxi 5.5 5.2up3, di seguito the quality:

1 SERVER IBM con raid 10 brain locali, 1 NIC a 4 door in lacp static + vlan mgmt separata da vlan vm

1 SERVER DELL con raid 5 brain locali, nic 2 a door in lacp 2 static + vlan mgmt separata da vlan vm

I have SERVER ONWARDS CORRECTLY SENZA PROBLEMI, MA UNA NOTTE IL SERVER IBM if e SPENTO (likely assenza corrente e/o minimum batteria ups)

Da what giorno, una VM avente Windows Server 2012 (not r2) con Exchange server 2010 sp1 (su ospitata IBM), non riesce a pingare della rete sotto stessa subnet ( when ip e quest'ultima non fa pingare da some stampanti di rete (used cars by scanning to e-mail).

"" Ho SC esxi IBM, controlled the vlan, controlled I vSwitch, controlled I portgroup... my non riesco a dove sta understand he problema... ovviamente anche the Altra VM che sta nello stesso HOST IBM ha lo stesso problema... non riesce a pingare "ip subnet price sopra della some..."

Ho anche una foto della struttura hoist...

VI want in pre-empted by the consulenza e attenzione.


Hai, tried a nic of the scollegare dal port group della vm? attaccala knew another port group e dopo riportale known original quello.

Check the arp delle macchine, dear che di table it mac address associato all'ip sia corretto. Da una riavviata agli switch.

IO non utilizzerei connessioni lacp verso gli switch, gli esx gestiscono in Autonomía I blame e he equilibrado


Tags: VMware

Similar Questions

  • 2970 DELL cannot ping IP DRAC [MS]

    I try to use the DRAC but able to ping the IP of the DRAC.

    I have configured as done in this video:


    What I try to study the problem?

    Thank you


    He firmware Bolivia e exclusively by the idrac, by running, dopo averlo copiato knew local folder, verifichi che he gives abbia I frequently precinct (esegua is chmod 777 nomefile.bin).

    Per quanto someday become general e possibile utilizzare he nostro dvd iso image Q1 Server Update Utility DVD ISO v7.2.1:


    Speaking saluti


  • Problemi di ping tra VM

    Ragazzi oramai molti di voi conoscono ahime the ibm_db reach by Elster di cronaca che mia:

    1 PC Office fisico, knew cui sono installation: workstation, sulla quale ho da an ESXi host e una VM FreeNAS.

    1 MACbook pro, knew cui gira: 1VM sulla quale ho da x far run VSphere windows

    Vsphere da mi connetto sull'host ESXi sul quale this ho da (al momento) 3VM cosi distribuite:

    1 con the operating system WIndows server 2008 R2 fans operate di AD / DC, e DNS DHCP

    1 room OS su cui gira Vcenter server e Viewcomposer con

    1 cui knew uso by links tutto da ho da he server connection e quindi che discovers Manager

    Per completezza vi dico anche che, I have PC (Desktop e macbookpro) sono tra di loro con treatment uno una LAN private ham indirizzi privati di class c, pero al therefore vengo switch...

    Come may slab VM che, sono sull' HOST non riesco a Mio it NAS invece che viene visto tranquillamente da VSPhere como device di memoria in rete?

    The VM che girano sull'host ESXI, tra loro if "pingano senza problemi", my al di fuori di quella Association if non riesce a nulla pingare, is the host No.

    Preciso che comunque ho usato solo IP statici e che Unico IP a disposizione mia lo assegnero al Security server pubblico in modo da wear access alla mia infrastruttura dalla rete internet.

    Come posso risolvere questi problemi di ping?



    By the cronaca... the bridge di Workstation mode su Linux non e di interfaccia a che Bridge allows it promiscous.

    E quindi "dietro" ESXi virtuale sono macchine isolate.

    By abilitarlo: http://kb.vmware.com/kb/287

  • Ping on ios

    Hello everyone, I discovered that when I do a ping on my router ( local, Ping is about 30 ms, which is very high, but when I'm with airplay, the same test give me a ping of 2 ms, which is normal. you have the same problem?

    ON the picture you can see ping before and after the air game is activated

    Thanks for your replies.

    I suspect the iPads wifi radio is in low power mode when no data is sent. This can have an overhead projector as the effects of the weather. iOS is not a 'performance raw BONES' is designed to save energy when it is possible to improve the user experience.

    When you run radio Airplay is sending and receiving data constantly, so the ping is faster that the radio is not disabled and re-enabled. The schedule isn't too out of the ordinary for me, you have a problem or you're simply curious?

    Try again when the download / streaming video or something that keeps the wifi connection active, it cannot be just Airplay making faster ping.

    You should also know that the router is another part of this conversation - it allocates resources to the stream to devices too, it may be faster when not having does not respond intermittently to a device. It also directs clean power for radio, etc.

  • My email on my iPad (version 8.4.1) application froze on a white page. I tried to power down and restart. I know I get emails that I can hear the ping and see numbers on the app. It has been frozen for a day and I have no way to display

    My email on my iPad 2 (IOS 8.4.1) froze last night on a blank page I was trying to send a few photos. I know I get emails that I can hear the ping and my email application shows that I have two new. I tried to put this off, then restart, but nothing changes. When I type my email application it goes to the blank page and after a few seconds goes back to my home page. I'm leaving on a trip to Europe at the moment I'm in a bit of panic. Any help will be greatly appreciated.

    You tried to close the Mail application via the taskbar of the iPad: force an app to close on your iPhone, iPad or iPod touch - Apple Support ?

  • Internet slow (ping) on Macbook (mid-2012)

    I a mid 2012 macbook pro (non-retine) and recently started having slower speeds of the internet. When you use the Ookla speed test, my ping is generally more than 200 (sometimes as high 700); my download speed is around 3 Mbps, when it is usually around 7. I thought it was the internet connection, but then I checked with an Ipad on the same connection, internet speed was 7mbps (ping was 40). When I try the speedtest on some sites powered by Ookla (like my Qwest or at the & t support site, it won't even run the speed test, saying that there is a latency error, or there is a firewall between my computer and the server).

    What I tried that did not work:

    Turn off the firewall in my security/privacy settings.

    Removing a silverlight program I had downloaded recently play video on a local Web site, so I don't know if that would be a factor.

    Remove the DivX program, based on what I've read in another similar post on the forum.

    * I did not run an uninstall on these programs, but just moved to the trash, then maybe it is needed?

    Change my DNS openDNS numbers numbers. I've since changed my original numbers.

    Any suggestions?

    Also, I tried to plug directly into my DSL cord and without wifi. The same problem.

  • Slow Safari and Firefox ping

    Hi all

    I use Safari 9.1 than my normal browser and OS X on a MacBook Pro late 2013 10.11.4.

    I tested my internet speed (speedtest.net) on all devices and noticed that my 6s iPhone and iPad 2 air both iOS 9.3.1 (speedtest.net app) had a ping of less than a third of that of the MacBook Pro.

    Then I tried Google Chrome 49.0.2623.112 (64-bit) and the speed is as fast as with iOS devices. Then I went 45.0.2 Firefox and it was as slow as Safari again.

    For the last test, I disabled all extensions in Safari, but has not made a difference.

    Is there a setting to speed up Safari on OS X, his counterparts of iOS? I would rather not use Chrome on battery because I lose an hour of battery time.

    Thank you all for your help.

    Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Cache.db, and then move it to the trash.

    Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

    Corruption Safari       See post by Linc Davis

  • Cannot ping localhost - error code 2 on Satellite Pro A200

    Dear COMPUTER gurus,

    I have a portable Satellite Pro A200.
    When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
    I tried to fix the winsock using articles from microsoft without success.

    Now I want to reapair the operating system using the recovery DVD.

    The recovery DVD has a repair option?
    If this isn't the case, anyone how to solve this problem?

    Help please!
    This is the result, I was using the pc diagnostic tool.

    Date 2008-08-30 01:47:12

    [Information on PC]
    Model name Satellite Pro A200
    Part number PSAF4U - 004 00D
    Serial number Y7312740Q
    Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
    BIOS Version 1.70
    Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
    RAM 1024MB of physical memory
    Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
    Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
    Version Mobile Intel (r) 965 Express Chipset Family video =
    Screen resolution 1280 x 768 Pixels
    Color quality, true color (32 bit)
    Audio version of Realtek High Definition Audio =
    Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = version = MAC address
    Intel (r) PRO/Wireless 3945ABG Network Connection version = references MAC address =
    TOSHIBA Software Modem Modem version =
    Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
    Interface IDE 2 no
    Interface IDE 3 no
    Interface IDE 4 no
    IDE Device 5 Hitachi HTS542512K9SA00
    Interface IDE 6 no
    Internet Explorer 7.0.5730.11


    > I tried to fix the Winsock by using the Microsoft s articles with no luck
    I guess you're meaning to this MS article knowledge base:
    [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

    Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

    So searched the Web of the 3rd party site and someone has suggested to try these tips.
    It s also from Microsoft:
    * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

    So check it out maybe it helps

    If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(


  • Can browse quote but cannot have their ping, apps can't access the internet


    I'll do my best to give a full description. I'm sorry if I include irrelevant information, but I don't want to leave anything out.

    I tried to connect my Macbook Pro (with El Capitan installed) 2012 raspberry Pi 2 via ethernet and access it through a web browser. He has failed. It was my first time using an ethernet adapter to crush on my Macbook Pro. Since then, any application that accesses to the internet does not (for example, Appstore, steam, Spotify, Google Drive). Again, however, I can access websites through a web browser. Also, when I try to ping from a Web site via the terminal like Google, it says "ping: could not resolve google.com: Unknown host" even if I can access via a browser. I have tried to disable the firewall and have even reinstalled El Capitan. In addition, internet via the browser if possible access is slower then usual. I am at a complete loss and would appreciate greatly any help.

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • Ping an Apple Watch

    Hey I lost my watch! and it took me time to find. And I would like to know if I could ping my watch from my phone? As I can ping my phone of my watch.

    Woud be much appreciated if someone could get back to me.


    No - it's not currently possible to ping from Apple Watch matched iPhone.

    If you want to suggest that Apple considers adding that as a new feature, you can do so here:


  • Tecra S1 - 'ping' the key "N".


    I have a Tecra S1 laptop. I accidentally 'ping' the key "N". I have now the key and three small plastic parts. None of them doesn't apperar to be broken, but I can't work out how to fix them all together and replace the key on the keyboard. Does anyone have a diagram key parts or advice.

    Thank you.


    If you are sure that the parts are not broken, carefully remove the other some but just the top button. On this way, you can see how everything is put together. This top is very easy to get back on the right position. Simply press the carefully plastic part on the right position.

    Good bye

  • Satellite Pro R50-B-114 - time to ping to router WLan problem


    I have a new laptop Satellite Pro R50-B-114.
    Unofrtunetely, when I connected it to my home network (router), I spotted there is problem with wireless adapter.

    Sometimes, everything works fine (ping ~ 1 ms to the router), but sometimes he changes completely (2000 to 3000 ms to the router).

    These problems are present, even if I have 2-3 meteres of router.
    I'm sure this is problem laptop ' other cos my work cell phones / devices very well with this router.

    OS: Windows 7 drivers: update.

    Someone at - it an idea of what's going on?

    Thanks in advance.

    Hmm... have you tried using different stadards WLan (802.11 A / C / G or N)

    As I am not mistaken the laptop was equipped with wireless network cards of new generation of Intel Wireless-AC 3160 that supports the 802.11 standard ac + agn.

    I recommend you check this setting.
    For the wireless network card, you must go to
    Manager of devices-> tab advanced Wlan card → properties →
    Here, you can change the Wlan standard as well as other settings.

    I would recommend you also check the Wlan stadrd in the Wlan router configuration and to ensure that the same standard is used by the network router Wlan wireless card.

    Also, the use of different WiFi (WPA/WPA2 AES, TKIP) encryption can improve performance.

  • Ping high Satellite A300D wirelles


    I have a problem when I play an online game, my ping is 30 sec ok for 3 seconds until 300 and then more.

    Wireless adapter is Realtek 8187 B and I think that there is the problem. I update all driver, but he continues to do.

    Have someone idea how fixit?


    It's not easy to say what is wrong, but often this problem is caused by the internet provider.

    It could also be a problem with internet router or when several computers at the same time are in internet.

    If you have a firewall on your computer, disable it and try again. The antivirus could also be a problem or other applications that run in the background of your computer. Then close any programs you don't need, when you play online.

    Do an update of your router, if an update is available.

    I hope I could help a bit and give me a reason what happened after these tips.

    Good bye

  • Satellite Pro M70-132: excellent WiFi connection but the pings are slow

    Hi all...
    My Satellite Pro M70-132 have problems with Wi - Fi connections (WiFi built in)... Generally, when the connection is excellent (indicator of windows), the pings are slow - very long time: 1212ms, 325ms, 645ms, 2112ms, 91ms, s 168ms... etc 'demand time limit has expired' (or sth like this).
    I have updated with the latest version of the Intel WiFi driver - it does not work...
    I installed new system - it does not work...

    Is it possible, that LAN WiFi is dead on my M70-132? How can I check before sending my 'Toshi' to the service?

    (BTW - built-in Bluetooth has been switched off...)

    I was tempted to access with several AP and also ad hoc. Every time, same results... connection strong-great but pings are slow... and often ping timeout...

    The IP address has been set manually and automatically - it does not work... too multidimensional :-(

    It's not metter WEP encryption is enabled, 'on' or 'off' and no authentication method does not change the situation with WLAN...

    Post edited by: maxgoldie


    If the work of WLan connection and you are connected to the router so I guess everything's ok.
    Time to ping depends on not always the strength of the signal.

    If you ping other ip on the net if the time depends on the provider and type of connection.
    But if you ping your WLan router and it s very slow so it s a bit strange.

    If you think there could be something wrong with the Wlan card then you can try asking for help ASP.

  • Ping of Satellite P500 sometimes times out

    I use a program that has my browser to contact him using the loopback address. I have been doing the lag issues and have spent weeks trying to diagnose the problem. I came across some strange results when I ping He answered about 10 to 15% of the time, apparently at random. I searched many forums and can't seem to find someone with a similar problem. When I ping: 1 (IPv6) the answer is perfect. I also noticed that the time it takes is different because it can ping: 1 in<1ms but="" it="" takes="" 1ms="" to="" ping="""" any="" ideas="" what="" could="" be="" causing="" this?="" i'm="">

    I bought this computer in January and it is running windows 7 home.

    Here are a few popular Ping:


    Ping with 32 bytes of data:
    Reply from bytes = 32 time = 1ms TTL = 128
    Request timed out.
    Request timed out.
    Request timed out.

    Ping statistics for
    Packets: Sent = 4, received = 1, Lost = 3 (75% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 1ms, Maximum = 1ms, average = 1ms

    n 50 ping
    Request timed out.
    Request timed out.
    Request timed out.
    Reply from bytes = 32 time = 1ms TTL = 128
    Reply from bytes = 32 time = 1ms TTL = 128
    Request timed out.
    Reply from bytes = 32 time = 1ms TTL = 128
    Request timed out.
    Request timed out.
    Request timed out.
    Reply from bytes = 32 time = 1ms TTL = 128
    Request timed out.
    Request timed out.

    Ping statistics for
    Packets: Sent = 50 received = 9, Lost = 41 (82% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 1ms, Maximum = 1ms, average = 1ms

    C:\Windows\System32>Ping: 1

    Rattling: 1 with 32 bytes of data:
    Answer of: 1: time<>
    Answer of: 1: time<>
    Answer of: 1: time<>
    Answer of: 1: time<>

    Ping statistics for: 1:
    Packets: Sent = 4, received = 4, lost = 0 (0% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, average = 0ms

    Hey Buddy,

    I put t know what program you use, but in your case, I will try to update the driver LAN and WLAN. Two updates of the driver can be downloaded from the official page of Toshiba:

    Do you use the preinstalled version of Windows 7 in Toshiba or your own installation?

    I would also try contacting the manufacture of this software. Maybe they can answer you why this happens and if there is an update of the software for example.

Maybe you are looking for

  • Cannot use search for google.ca

    The google search engine included with FF will not connect to any Web site through google itself. It just keeps trying to connect on & much more to the URL of a site, etc. Can I get a google of old bookmarked page and that's all what he will do. An e

  • The song will not load in iCloud

    I recently added a few tens of songs to iTunes and they are not download to the cloud. I had the small cloud of dotted line next to them for about 24 hours. All I can do to force it? I tried to restart my machine (iMac). I've also recently updated iT

  • envy touchsmart 15-j024sa: hard disk hardware kit

    I just got a 15-j024sa envy touchsmart, there a 126 GB ssd card but I need a disc hard material kit part No. 718432-001. If I can fit a 2.5 drive ".  Where can get a please. I'm in the United Kingdom.

  • Report header update XML with values of table of process model

    Using Get and add steps to add some containers StationGlobal the XML report. Then made changes to the horizontal.xsl to show the new values. Everything was fine until I tried to view the news of cable that is a container for three tables.  Find the c

  • FoxPro 9 error message. "Data type mismatch.

    Hello In front-end, when I opened a second menu there is an error message "data type mismatch. How can you fix this bug? Kind regardsEsyrom [Moved from comments]