Similar Questions

• VMNet1 and VMNet8 were not created during installation

  Hello

  I installed VMWare Player 4.0.4 on a 64-bit Windows 7 host.

  I use XUbuntu 11.10 as the guest operating system, and in the settings of the virtual machine, the network is configured for NAT.

  I run a Web server on the guest in port 3020 operating system and I'm unable to connect from a browser, I opened in windows.

  In the browser, navigate to: http://192.168.132.128:3020 / where 192.168.132.128 is the ip address of comments as indicated by/sbin/ifconfig.

  I suspect that the problem is the fact that I don't have an adapter VMNet1 and VMNet8.

  In some ways, they were not created during the installation.

  How to re-install these adapters?

  Thanks in advance,

  Ido

  • At the changes I made (the address of ip subnet of 10.0.0.0 vmnet8 and vmnet8 IP gateway for 10.0.0.138 chaning) correct?

  If the physical LAN subnet use 10.0.0.0 then no VMnet8 change to this subnet is bad.  It is also wrong to affecting also the VMnet gateway IP address in the same IP as physical LAN Gateway IP address.  The local physical network and VMnet8 (NAT) are supposed to be completely distinct and different from the IP addresses, the subnet mask, gateway IP address, etc.   Use the restore default in the virtual network Editor to fix your incorrect configurations.

  • Should I just the adapter VMNet8 if I use NAT? (currently in the "Network Sharing Center" I have LAN and VMNet8)

  If you try to run a Web server in a Virtual Machine and you want to be able to access if the host beyond and you have a physical router that the host is connected to then assign just NIC of the virtual machine that is connected by a bridge and it will be a counterpart on the physical LAN.  Also in the virtual network editor change VMnet0 auto to a specific host NIC as the automatic bypass does not always work correctly.

  • Is there something I can do to solve the speed problems I experience in the guest operating system?

  I would like to start using the button restore default in the virtual network and then editor change change VMnet0 from auto to a specific host NIC and then the value of the Network Adapter to the Virtual Machine, connected by a bridge.   (Bridged using guess your able to do so)

  If you use NAT then do with it properly configured and that you use Port Forwarding as necessary in the virtual network for VMnet8 Editor.

  ==========

  As well as your using VMware Player, however, read Chapter 5, setting up the network connections, by Using VMware Workstation in order to have a better understanding of the Infrastructure virtual VMware.  (Note: not everything in Chapter 5 will apply to VMware Player.)

• Incompatibility of speed/duplex on Tandberg EX90

  Hello

  Hope you are doing well, I'm here today because I have a problem with our Tandberg based @ Zurich Switzerland.

  When we connect to the web interface, we have a troubleshooting message: "speed/duplex of Missmatch.

  I did the network speed auto, but it changes anything.

  Could you please help me?

  Often the duplex mode is auto-négocié between the two pieces of equipment; However, auto-negotiation works only if both devices are set to 'Auto '. If a device is set to 'Auto' and the other has other settings, the device of auto adapts as 100/half. The most common cause of problems of incompatibility is the scenario where a device is set to 100/full and the other is set to Auto.

  • Check the configuration of the network switch where your TANDBERG end point is connected.
  • Change the settings of the device so that the devices at each end of a cable have to be the same speed/duplex (1000/Full, 100/Full, 100/half, 10/Full, 10/half) parameters or are both set to Auto.

  Kind regards

  Acevirgil

• VMnet1 and VMnet8 Edition

  How can I change the network settings (mainly VMnet1 and VMnet8) on a Windows host based with VMware Player 3?

  With VMware server I used to use virtual network Editor, but I can't locate...

  Concerning

  Marius

  You should have seen the instructions for the extraction of vmnetcfg to this other post you answered.

  For the setting of the maanually of vmnets, read:

  http://sanbarrow.com/network/commandlineguide2vnets.html

  http://sanbarrow.com/network/cmdguide2workstation.html

  It is not suitable for users of double-click ;-)

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Portege M400 is frozen, screen goes black and the fan speed increases when moved

  Can someone help me please?

  I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
  Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
  So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

  Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

  Hello

  I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

  I use the switch/cat6 cables only the router is capable of 100 Mbps.

  Also, I connect the pc directly with cable and still the same speed.

  Win7 will get more than that and how?

  I read the other posts on this topic, but all patches are not applicable to me.

  I used various cables and switches and PCs in order to eliminate the possibility of a defective unit.

  Can you please help?

  Thank you

  Andreas

  Hello Andreas,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  TechNet Windows Server Forum

  Hope this information helps.

• Speed / duplex settings on 4400g

  Is it possible to adjust the speed / duplex settings for the NETWORK adapter on 4400g DMP? I am aware that the gigabit interfaces have no duplex settings but if the device is connected to a switch 100 device adjustable 100/Full?

  I see not all parameters, nor I see no output from the MIB indicating the current settings. If it cannot be set is it supposed to be set to auto/auto?

  Hi Ryan,

  Your assuption is correct. Speed/duplex are set to auto/auto on the DMP. This is not configurable by the user.

  Kind regards

  Marco

• VMnet1 and 8 does not appear in Windows 7 connection to the home network

  Can someone help me please, I'm new on a virtual machine, I installed VM 9 and degraded to 7 as well, but in two time I am not able to see vmnet1 and vmnet8 in my windows 7 (cards) host machine network connections, I can see that these are present in VM Editor, when I'm clicking 'Connect a virtual adapter for this network' I'm seeing connection host becomes connected but soon I hit the application button we disappeared.

  ipconfig/all is not showing me the vmnet1 and 8 adapters as well, I tried to install this from the Device Manager, but I can't

  Every single option that I know that I used as services, Device Manager, disable the firewall, antivirus, reinstall, bios check, google search, but I get no answer.

  I use Windows 7 Core i7, I checked the bios and VT - x is activated, CAN ALL ONE please PLEASE HELP me, I really appreciate it,

  Atif

  I don't think it's a driver problem, because VMware Workstation - like any other Windows application - takes advantage of Windows features for networking and does not separate NETWORK interface drivers but only services that use default API.

  Have you tried to completely uninstall VMware Workstation (using the command line option / clean ) before installing another version? And have you installed using 'Run as Administrator' to make sure that it is not a permission problem. You can also read
  http://faq.sanbarrow.com/index.php?solution_id=1113. Although it is for version 7, most of the points still apply.

  André

• VMnet1 and VMnet8 necessary adapters?

  Hello

  Recently, I installed VM_Wkstn8 and created two virtual machines. Two VMnet1 and VMnet8 virtual cards have been installed on the host computer. Dig in I thought it was the virtual card that routed between the adapter to the host and the virtual machine. Then I disabled the as an experience and... nothing has changed. The virtual machines ALWAYS have connectivity network, always get a DHCP assigned address and can still communicate on the network... So what don't understand me? These adaptetrs are not needed? So why install them?

  Docs tech information greatly appreciated.

  JB

  They are required if you specify NAT or type of connection guest network only for your virtual machines.  If you want only the type of connection in bridge, then no., you won't need these.

• Cards VMnet1 and VMnet8 and private network of the type of work

  Hello

  I installed VMware Workstation 7.1.4 on Windows 7 Home Premium 64-bit, and I created a virtual machine so that it goes on internet in bridge mode.

  I noticed that, in the 'network and sharing Center' on the host (192.168.1.2), VMnet1 and VMnet8 adapters are associated with an unidentified public network.

  Using the virtual network Editor, as do change the parameters of VMnet1 and VMnet8 to ensure that the network, associated with those adapters adapters, is considered to be a private network work type (category = private, location = work)?

  Thank you

  Good bye

  The best way to proceed is to exclude the two cards VMWare Windows NLA (Network Location Awareness), which is what controls your network location. Other suggestions (Windows Firewall disabled, among other things) is not acceptable.

  Follow this link for more details on how to perform the operation:

  http://www.Petri.co.il/forums/showthread.php?t=45181

• Vmnet1 and Vmnet8...

  I went to: Edit & gt; Virtual network Editor

  And changed the IP Address of the subnet for VMnet1 and VMnet8.

  I noticed that in my entries of network connections on Windows XP for each of them, they were fixed on a specific IP address.

  (1) can I change the entries in the network connections to automatically obtain its IP address?

  (2) if I let the caraa, I guess I have to give them an IP address online with my modifications to the VMware Virtual Network Editor, correct?

  Thank you...

  The answer to both your questions is Yes.

• How to detect the duplex and the current speed of the Ethernet card?

  Hi, is there a tool to measure the current Ethernet card speed and duplex? I remember we had one for XP, but it does not work on Win7.

  Any thoughts?

  Specifically, I need to make sure my router and my NIC to work together without duplex mismatch.

  Thank you

  You will never see these actual speeds anyway. They are all theoretical maximum speeds. The only way to find your actual speed is a test of speed through your Internet access provider. Frenchie

• Airport Extreme 7,7,7 drop connection and internet high speed

  My Airport Extreme (6th generation) have had the serious problems of the internet, as said in the title I had problems with my internet connection, I checked if that was the problem of the modem to the beginning (D3.0 Ubee) which was provided by my Internet, Charter provider.

  I've had Airport Extreme for almost a year to 2 years now and since then, I had no problem with my internet until 7.7.7 update came.

  I updated my firmware and this is where my random internet connection problem started.

  My current contract with the Charter are their 60 Mbps (download speed) and 4 Mbps (download speed), during the first days since I've updated 7.7.7 connections was fine and then my internet has started to decline since a means 50-60 Mbps (download speed) to 0.1 - 2 mb/s (download speed), my download speed has remained a constant 3-4 MB/s (download speed). I have tried and used Opendns several times, he really did nothing.

  I tried to turn off both modem and Airport extreme for a couple of minutes and turn on their return, but he does nothing and just refers to an extremely slow speed.

  The only way I found to fix my problem to get my internet to 0.1 - 2 mb/s (download speed) back to its original state, I find myself to be a restore return settings on the Airport Extreme with my Airport utility by default whenever the problem returns (which contributes to a certain degree as it gets my back up to 50 internet-60 MB/s) then he drops down again).

  I wanted to restore to 7.7.6 or the latest version of previous firmware before 7.7.7 (not too sure what version of firmware, it was) but I can't find how to spend my Airport extreme to my Airport utility.

  My question is what could I do to fix this problem if the decommissioning of my extreme (I need instructions with this too), change some settings, get rid of the * thing and get a new router, or am I stuck resetting to the parameter by default whenever she acts upward.

  I use windows 10 for my laptop

  Thank you for your time

  Unfortunately, the first question that you encountered is the AirPort for Windows utility has not been updated since Windows 7. In addition, it is not supported for use with the 802.11ac latest versions of airport base stations. Then downgrade to earlier versions of the firmware for base station can be difficult, unless you can get hold of a Mac or iOS device.

  If you are ready to test Windows 10, here are the steps to do:

  • Open the AirPort for Windows utility.
  • Select the base and then station in the utility menu bar, select the access point > Download Firmware...
  • Click on the Download Version dialog box, where the current version of the firmware is listed.
  • You should now see a list of the firmware versions that are available.
  • Click on the one you want to get off at.
  • Choose either 'continue' to continue with the downgrade, OR click 'Cancel' If you decide not to do so.
  • If you choose to continue, allow the firmware to be downloaded, installed and the base station to turn.