VMW Workstation 9 taking in charge of hard drives

Similar Questions

• How many workstations can connect and use a hard drive in windows 7 Professional?

  How many workstations can connect and use a hard drive in windows 7 Professional?

  Thank you

  Randy

  Original title: Windows 7 Professional Log In

  If my memory serves me, 10 is the professional for Windows Server limit.

• HP workstation xw6200 model number: DU937AV 2nd Hard Drive installation

  Hello everyone

   

  I am owner of a workstation XW6200 renovated with a HUA721010KLA330 of Hitachi (1.0 TB) 3 1/2 "7200 RPM SATA 3.0 GB / s. I still own one of these I would like to install in my machine.

  I did years ago (my state of the art machine had a 1 GB HD at the time!), but things have changed since that time.
  

  I'd appreciate your advice on how I should go about it.
  

  Thank you very much for your help.
  

  All the best,
  

  Boyar
  

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]

  Boyar,

  The manual States that you can have 2 Sata Serial ATA drives. See the Manual.

  Refer to article 69 pg 19 and 20 for the Sata data headers. See pg 100 for the hard drive Bay.

  The PSU has 2 Sata power cables, so all you need is a Sata data cable. Just imitate existing lead.

• Recovery of HARD drive taking half of my hard drive space?

  My computer has two separate drives. C: drive with 74.3 GB of space and E: drive that was 73.2 GB of space.

  I did not burn the recovery disk but who is on this drive e. when I burn it will free up space on this drive and I'll have the 140 GB that I thought that I get when I bought the laptop?

  Or will I have save other things on there if I m download, if so? I put t know how to do this.

  Hello!

  If you burn the disc of recovery with the Toshiba recovery disc creator, the folder will not be deleted and you have no free room yet.

  If you burned the recovery disk, you can remove the hard drive, but when you restore a windows you need the recovery disc. If you n t remove the image on the HARD drive, you can also use it to recover.

  You can download t the creator of recovery disk or something else. It s all preinstalled on your laptop and if you have any other questions in the user manual are lots of information about recovery.

  Good bye

• Charged computer hard drive Gateway laptop with Windows 7 and installed in the Dell computer. Now it says Windows is a counterfeit

  my gateway labtop has been damaged so I removed the hard drive and installed in my dell requires a hard drive.  It worked great for about a month and now it tells me that I have a copy of windows conterifet.  When I bought the two all have windows 7 on them what make?  I can't afford to buy and I have not to?

  When you buy a computer with a copy preinstalled Windows 7, it's the OEM version is good ONLY for the system with the original motherboard.  If you remove the hard drive and move to another computer, Windows 7 license is not good and cannot be enabled.  Please don't shoot the Messenger!  :-)

  Good luck.

• Workstation 7 - recovery XP detects no hard drive...

  After a crash of windows 7 today, I couldn't restart my XP VM more. I received the error message that a windows file is missing or corrupt (\windows\system32\config\system). I pulled out my XP restore CD and now I get at the start of the recovery of the message no harddsiks found. What should I do now?

  Any help is very appreciated!

  If you used Windows Easy Install and or you are using a SCSI virtual hard disk then you must load the drivers SCSI of VMware when booting from the Windows installation CD by pressing F6 at the right time as indicated at the bottom of the screen of the VM in this process.

  You can download the VMware VMware SCSI driver disk and assign the .flp on the diskette

  You can the legal successor of the ' vmscsi - 1.2.0.4.flp "to a floppy drive however do not connect until just after the BIOS post or change the Boot order in the BIOS or use the Start Menu.

  Take a look on: How to recover from a corrupted registry that prevents Windows XP from starting

  See also: Description of the Windows XP for advanced users Recovery Console.

  Option 2: From the Windows XP CD-ROM Windows Recovery Console

  Post edited by: WoodyZ

  Note: has

  vmscsi. FLP

  There is also a file to: C:\Program VMware Workstation\Resources

• Time Machine deleted messages on an external drive to the trash can on iMac are taking place on the hard drive?

  I am struggling with a computer, try to empty the trash with 1million 300,000 Time machine backup files. It runs for two days now and won't install. At this rate, I'll need a week before my computer becomes viable. I don't feel able to go to the Terminal to do the trick. Also at this point, I'm afraid to stop the process again... Backups on an external drive of pigs 400 GB on my drive hard imac... I have so little room to work right now. I deleted some 200,000 files already yet the storage on my imac HD has not moved. The files in the Recycle Bin of the external drive really live on my hd now until they will be deleted if all goes well before Christmas?

  I have a new computer to come next week so I'm wondering if I'll just reformat my entire hd in my imac to solve this problem... Any ideas?

  You do all this in the Finder?

  Time Machine has to delete the files from the user interface, normally "browsing Time Machine backup", navigate to the desired folder, and select the option "delete all backups of...» ». This is the approved way that should work.

  If you are manually dragging the items in the trash of in a Time Machine backup, it can choke. Time Machine stores data with many levels of access control permissions & Finder seems to have difficulties to remove to empty the trash. In fact, I think that the TM drive has limits to prevent normal users to change data on this disk.

  Personally, I think your safest option is to abandon the process, restart, erase and reformat the Time Machine drive. Who will lose all history backups but again in a clean condition seems to be better than trying to manually prune the Time Machine data. Time Machine removes old backups when it is full - so you shouldn't really need to intervene like this anyway.

  Wait and see if anyone has a better idea.

  P.S., each disk has its own "basket", so doing drag items should not fill your Mac startup disk. Maybe the operating system is out of memory, try to process all the files, exit other applications & see if that changes anything, you may have to wait just if you want to avoid to abandon the process.

• Replacing the hard drive HP G62-450SA model / recovery. Windows 7

  Hello

  Last week my laptop started running very slowly, and after a few tests, it seems that the hard drive is on its way.

  I phoned to HP supports, however is out of warranty I wasn't able to get a real support, but advised him to watch the online support pages to back up my files, create a file recovery on a usb device and then it would be as simple as taking on the old hard drive, put in the new, and following the instructions to recover my system and files.

  So after these tips, I've created:

  -A recovery image USB on a Virgin USB key, using the Recovery Manager

  -A backup on an external hard drive using the backup and restore

  -An image of the system by using the backup and restore.

  Then I replaced the hard drive.

  When I turned on the laptop all I get is a black screen that says "no boot device - insert the diskette and press any key".

  I have not all discs. I thought that was the point of creating the recovery image on the USB key? I insert the USB key, and it is not recognized.

  If at this point, I'm stuck. I'm not all boards because HP say they have to charge me.

  Please can anyone here tell me what to do next? What I need to buy recovery discs or is there a way I can install the new hard drive by using the above files?

  Thanks in advance

  Hello

  You are welcome

  Another option, you can try would be to restore the system image you created - you can do the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Connect the drive that contains the system image you have created and then follow method 3 below to reload the image on the new HARD drive.

  http://www.shivaranjan.com/2009/05/21/Windows-7-How-to-restore-Windows-7-partition-or-hard-disk-part...

  Kind regards

  DP - K

• Refusal of the WORKSTATION to access external hard drive window

  Hello

  I can't access an external hard drive (WD My Book Home Edition). The problem happened when I disconnected my external drive from my Win XP Pro computer and plugged into another Win XP Home computer that had another WD external drive attached to it. Both my drive ext as wel as the other disk ext became inaccessible. I disconnected my 2nd computer ext drive and connected to computer Win XP pro that I always use. However even though my computer recognizes the drive I have noticed that the icon WD changed to a regular folder icon and whenever I try to open it, it says drive H is inaccessible. I also noticed that the folder icon was the same as the 2nd ext drive connected to the computer Win XP Home. I tried the microsoft bulletin:
  "This article describes how to capture a file or folder to which you are denied.
  I décliqués the "simplified" sharing and set permissions on a shared folder. "" After that it gives information about the ownership of the folder as follows:
  To take ownership of a folder, follow these steps: right - click the folder you want to take control and then click Properties.
  1. Click on the Security tab, and then click OK in the security message (if one appears).
  2. Click Advanced, and then click the owner tab.
  3. In the name list, click on your user name , or click on administrator , if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects.
  4. Click OKand then click Yes when you receive the following message is displayed:
     You are not allowed to read the contents of the directory folder name . Do you want to replace the the directory permissions with permissions granting you full control?

     All permissions will be replaced if you click Yes.

     Note folder name is the name of the folder you want to take charge.

  5. Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

  I can not follow these directions as I do not have a visible security tab. I was able to save things to my ext drive but cannot access it from the my computer window. I am therefore able to see the contents of the disc in the 'SAVE AS' window. Given that I'm not very good at the computer stuff can someone give me step by step instructions on how to access my drive hard Ext. window "WORKSTATION". Thank you in advance.

  Soleil2012

  Harman salvation,

  Requested information:

  http://support.Microsoft.com/kb/308421

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connect the hard drive SATA HP workstation xw6200 - 2nd / SATA controller card

  I run this system:

  Manufacturer: Hewlett-Packard
  Model: hp workstation xw6200
  Model number: DU937AV
  Categories: Computer....................
  Hitachi HUA721010KLA330 (1.0 TB) 3 1/2 "7200 RPM SATA 3.0 GB/s
  Sony Optiarc DVD RW AD-unit 7200 s ATA Device
  OS version: Microsoft Windows 7 Professional, Service Pack 1, 64-bit
  Processor: Intel Xeon processor 3.60 GHz, Intel64 Family 15 Model 4 Stepping 1
  Number of processors: 2
  RAM: Mb 8191
  Graphics card: ATI Radeon HD 5400 Series, 1024 Mb
  Hard disks: C: Total - Mo 953768, Free - Mo 911783;
  Motherboard: Hewlett-Packard, 08B8h

  Installing a 2nd HDD I have to install a SATA, two slots used SATA controller card. I would like to know which card to choose.

  I have 4 ports PCI available (#26) and 1 PCI Express x 8 first (#25) available. The two PCI and
  

  PCI Express SATA controller cards are available. Who would you recommend?

  Thank you for your help.
  

  Boyar

   

   

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]
  

  I'd rather than PCIe PCI for this purpose.

  HP liked SIIG for a number of their SATA PCI slot cards.  SIIG has updaters for these maps on its web site, and the pilots understand place in Windows 8.  Here's what I recommend if you want to only two new SATA internal ports:

  http://h30094.www3.HP.com/product.aspx?SKU=3062195&mfg_part=SC-SAT212-S4&pagemode=CA

  There is also a card HP SIIG eSATA that HP has used, and I have also used that... it worked great.  It has two eSATA ports and no port SATA internal:

  http://h30094.www3.HP.com/product.aspx?cache=2012565552&culture=en-us&SKU=2850719

  In addition, you can connect a single SATA hard drive on an eSATA port (the reader would need external power supply) for formatting, etc.  For that you need a cable with eSATA on one end and a connector type SATA internal regular on others... it is so much easier than to open the box and play with the internal cables.  The best quality I've found for those who are Macgurus.com or Granitedigital.com.  Opt for a shorter (1 m) rather than a longer therefor version if you choose to do so, in order to reduce the risk of interference (which I have never seen this):

  Macgurus told them are indicated for the generation SATA I, II and III, and they are a little cheaper for a length of 1 m of the granite.  Both are excellent companies.

  Finally, there is a HP SIIG PCI with combined eSATA/SATA, with a player external eSATA and SATA port internal:

  http://h30094.www3.HP.com/product.aspx?SKU=2850718&mfg_part=SC-SA1012-S1&pagemode=CA

  I'd stick with HP SIIG solutions and probably buy directly from HP for this unless you can find the same for much less expensive on eBay.  The cards have had several revisions, and I think that if you get your HP, you would later.

• In XP, why can't see a hard drive in the list of workstation?

  I have a hard drive that can be seen in the devices, but also computer management/disk management Manager. But the drive does not appear in the list of workstation hard drives.

  The spooky part is under run cmd, the drive appears and I can Dir list its contents.

  Hi Heenanjc,

  • It is an external hard drive or an extra hard drive connected to the computer internally?
  • What is the drive letter assigned to the drive in disk management?

  I would say lets you assign a new drive letter of the drive or change the drive letter of your disk management drive and check if it helps you to solve the problem and if you view it in the window of the computer.

  To assign or change the drive letter in disk management follow the steps below:

  a. open computer management by clicking the Start button, clicking Control Panel , clicking system and security by clicking administrative tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, click Disk Management.

  c. click on the drive you want to change and then click on change drive letter and paths.

  d. do one of the following:

  ·        To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.

  ·        To change a drive letter, click on edit, clickAssign the following drive letter, click the letter you want to use, and then click OK.

  ·        To remove a drive letter, click on remove and then clickYes to confirm that you want to delete.

  Access the link below to learn more about changing the drive letter.

  http://support.Microsoft.com/kb/307844

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hard drive not recognized by BIOS in Dell Precision T7910 workstation

  Greetings,

  I recently acquired a Dell Precision T7910 workstation without all the hard drives installed, so I went to the store and buy a 240 GB Sandisk SSD put in the hard drive and then installed caddy caddy in port 0 (I also tried port 1 with the same results), and then I turned on the computer and it says "no drives found" press f2 to enter setup or press f5 for the diagnostics. I think there is probably a setting in the BIOS to configure the hard drive that I'm ignorant, so any help would be appreciated.

  Is there a CTRL-R (or another command CTRL during POST) to enter a for the LSI controller configuration utility? Possible that if installed/enabled, ports are managed by the controller LSI instead of the BIOS. However, I have not a 7910 to watch... just go out how it worked normally.

• Charge of $621,78 for the bad hard drive

  Hi all

  I know that this is not a question of remedy, but it should be expressed somewhere I found that I was charged for a Fujitsu 250 GB SATA HDD $621,78. Exact same drive price on ebay is $ 68. The party is certainly my fault. It was a warranty repair that turned bad. I put the old hard drive in the corner, and I forgot to return it. Warning e-mails of an imminent load was not read because of anti-spam filters. My fault. However, there is no way anyone can claim that a hard drive is worth anywhere near that amount. The laptop (a dv6700) was around $ 800! I called customer service and said that it can not be repaid, even if I have to return the defective part. I am currently waiting on a call while my case was refitted. I want just opinion of the public on this, and perhaps an HP employee who can actually do something about it will be advice. The spare part # the disk hard is 453775-001. Come on HP!

  Frustrated,

  -Corey Hansen

  Gee... Thanks for the helpful reply. I already know it's my fault. The point is, I can't expect to pay that kind of money for a hard drive.

  In any case, I'm happy to say that my money will be repaid. I got on the phone with them yesterday and they sent me directly to their row escalated. Apparently, the guy who helped me before in fact did nothing. All I have to do is send in the old part. Done and done.

  At least we know there are a couple of sane people that work the lines of HP service. Just pray you get one when you call.

• just formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded

  I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .

  Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.

  Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?

  http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/

  If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  With Windows XP installed first:
  http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/

• I have a challenge Code and need a Code of taking in charge to reload my Illustrator CS5 after my system crashed?

  I have a challenge Code and need a Code of taking in charge to reload my Illustrator CS5 after my system crashed? Windows 8

  Lost information - response #1 in https://forums.adobe.com/thread/2008767