VMware Converter 4.0 - Manter o IP apos converter fisca em maquina virtual

Similar Questions

• VMware Converter 4.0 and Virtual Server 2005 R2 VM

  I downloaded the new VMware Converter (Version 4.0.0) because he had promised for the merger as a target.

  I have the image of Sharepoint 2007 VIrtual demonstration of Microsoft Server which works OK using Virtual Server.

  The converter seems to be a valid VMware image on the PC where I run the converter.

  I copy the VMware HD image created on my external Mac (OS X 10.5.6 Fusion 2.0.1) and merge it opens but there are questions.

  1 fusion think that the virtual machine is an 'other' OS rather than Microsoft Server 2003 Enterprise, which is what the VM from virtual server. Therefore, I can not install VMware tools on the virtual computer.

  2. If I change the type of operating system in the interface of Fusion Server 2003 Enterprise settings and that seems ok. Then, I am able to install tools in VMware Fusion.

  3. after the required reboot to complete the installation of the tools, the VM comes back BUT the mouse pointer is no longer visible. The virtual machine makes it unusable at this point.

  I remember posting on this forum awhile at the time where I realized first that the virtual server instance could be opened with a PC version of the workstation and I remember reading while the mouse pointer is a problem.

  So is there anything, I can do to get the Fusion tools installed AND have a working mouse pointer?

  Any help appreciated.

  Jim

  Yes, it is removed from the control panel and you can try on virtual machine converted however, it may not work.  As before you convert you can do anyway that you presented.  I like to make a copy and use it as I want to do some other preprocessing and then I just remove it when I'm done leaving the original intact, but whatever way works for you is fine.

• Is it possible to install Vmware converter in a virtual machine?

  Hello

  I would like to know if its possible to install VMware converter in one machine virtual host Xen (WinXP)? We must find a way to convert a Xen virtual machine and import it into an ESX environment. So my first plan was to mount a hard drive of the virtual machine Xen host and install VMware converter.

  Unless there is an easier way to do it.

  Appreciate any feedback...

  Thank you.

  Hi Jakepp,

  You can use VMware Converter to transform your XEN VM for VMware. You can take a look at the following kb to confirm:

  • http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005298

  Good luck.

  Concerning

  Franck

• Converter running in a virtual machine

  Anyboidy use VMware Converter install on a virtual machine?

  Is there a reason to discourage the installation of VMware Converter in a VM (obviously, to convert other virtual machines hosted by the same infeastructure of vSphere)?

  What is the best operating system for a virtual computer to use to run VMware Converter?

  Concerning

  Marius

  I used it in a virtual machine and it works fine, as long as there is no special bottlenecks in your virtual machines on the physical environment. I don't think that there is a preferred operating system as long as it is under the supported list.

• a file IO error occurred during access to vmware converter 6

  Hello

  I'm trying to convert a windows 2008 R2 on a virtual computer and using VMware converter v6 system. but the task does not reach 1% with an error a file IO error occurred during access ". 

  Please find the screenshot of the error and logs.

  Any ideas?

  
  

  
  

  Hello

  I solved the problem of the Harbour between the Source and ESXi host close after opening the work of process is Port 902

• Anyway to face disconnected VMWare Converter startup disk?

  I have a computer that is dead, and I want to virtualize the computer.   Is it possible to use any version of VMWare Converter steering on a boot device that belongs to a different computer than the one currently loaded?    The boot device in this case was SATA, and we would just climb as boot device as a disc of data on another computer.

  It seems that VMWare Converter has a coded hypothesis hard it can work as an administrator in the OS environment started it virtualizes, but I hope that there is another way to execute to achieve desired virtualization.

  The following procedure will not work if the startup disk has a Windows operating system.

  1 lauch Workstation right-click of the icon and use "run as Administrator".

  2. create the new virtual machine
  3 assign the physical disk instead of the one given by the wizard.
  4. do not start the virtual machine
  5 lauch converter via "run as Administrator"
  6. Select the option "set up the machine" and select the vmx file - you just created with workstation.

  If you do not want to run the virtual machine from the external drive use vmware-vdiskmanager and convert the vmdk you created in step 3 in a normal vmdk.

• VMware Converter 4.0 and 5.0 downloads

  I believe that in order to download the 5.5.3 or 6.0 VMware Converter. I have a 2003 SP1 server to convert, and if I read correctly the documentation, to support the most recent version is 4.0.

  I could install 2003 SP2, which means I could use Converter 5.0, but I'm not either of these versions of converter for download. They were abducted by VMware? If so, suggestions on how to proceed would be appreciated.

  Thank you

  To be a little more specific - SP1 is not officially supported, but the code that performs the conversion is the same regardless of the level of MS.

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• VMware Converter refused while trying to convert the Linux server

  Hey all, I'm trying to convert a Server CentOS 6.6 Nagios in a virtual machine on a cluster of ESXi 5.5.0 and not having a chance. When I try to start the conversion I get following error message:

  [Code] Permission to perform this operation was denied [/ code]

  I use VMware vCenter Converter Standalone server Version 5.5.3 Build-2183569 and I am doing the server Linux my VMware vCenter Server, Version 5.5.0 Build 2001466. I thought I could use the wrong password but I can't able to root very well on the Linux server. Iptables is off and Selinux is disabled. I played with the free version of ESXi and now I'm under more Essentials. I Googled it and found a lot of answers, but none of them fit my situation. Here, any help would be greatly appreciated.

  Thank you

  Joe B

  If you run the client VMware Converter from a Windows OS, try running with the help of the high privilege (Run As Administrator): http://www.jonathanmedd.net/2013/12/vmware-converter-permission-to-perform-this-operation-was-denied.html

• VMware converter 5.5 Update 1 and target host is 5.0.0 - is a known problem observed during execution of this?

  I intend to use vmware converter 5.5 update 1 and target host is 5.0.0.

  someone can confirm if there is any known problem observed during execution, it is?

  Welcome to the community,

  According to the Matrices of the interoperability of products VMware Converter 5.5 supports ESXi 4.0 and versions later, you shouldn't have issues related to the ESXi version you are using.

  André

• Question about VMware Converter traffic

  Hi all

  Hoping someone can shed some light on this. I do a P2V on a physical server in site A and destination ESXi host is also at the site. However, the field 'destination' in the VMware converter must be the vCenter server which is on the Site B (via a 6 MB WAN connection) as the destination host is managed by a vCenter server. My question is if I use the server vCenter (located on a WAN connection) as a destination and then choose the host located on the local site in the converter, converter traffic flow over the WAN? Or is it just flow locally from the Source to the Destination and just use the vCenter server as a server of type "authentication" for the initial Setup?

  And as a side note, if I set the destination host ESXi as a destination in the converter instead of the vCenter server, I get the error indicated in this KB. http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2012310

  With the help of converter 5.5.1

  Thanks for your help!

  Hello

  Traffic passes from the source computer to the destination ESX. You will have a small slowdown in the wizard before you start converting mainly to get the VC inventory. See the graphics in the user pp. 11-13 guide

  Concerning

  P.S. If you want to V2V, keep the server converter on site A, too as in this case, that the data passes through it.

• Error VMware Converter in converting a physical server

  Hi support them.

  We Vsphere 5.5 and trying to convert a physical machine into a virtual machine with the help
  VMware Converter 5.5 standalone.

  source server is windows 2008 r2

  We receive the following error

  FAILED: An error occurred when opening a virtual disk. Check
  that the Converter server and machines running the source access access network
  to the ESX/ESXi hosts source and destination

  Please help me solve the same if it's not
  the appropriate forum to discuss this please guide transmit me on the right Forum

  You can also find the error logs

  Thank you

  Anoop

  The error is:

  2014 05-11 T 18: 17:05.288 + 04:00 [warning 03248 "Default"] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for server presxi13.in.nawras.com.om address: no host is unknown 2014-05-11 T 18: 17:05.288 + 04:00 [info 03248 "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Your physical machine could not connect to the ESX Server, allow the COMPLETE domain name resolution in a physical machine. HTH

• VMWare converter - Windows NT

  Hello

  Not sure if this is the right place for this question, but I need to create an image of VM to a Windows NT computer.  I was hoping to use the Converter Standalone package, until I realized that it was not compatible with NT.  Then I read that an older version (3.0.2) of the converter work with NT, but was crushed to learn that he was no longer available for download.  Can anyone offer any suggestions?

  Thank you

  Glen

  glenikins wrote: I checked this and v4.0.1 does support Windows NT (SP6) but only for a machine virtual source, not to a conversion powered physical machine.  It's a physical Windows NT machine that I need to convert it to a virtual machine.  Do I have any options for this?

  Yes, there are always options.  The manifest is for VMware converter - 3.0.3 - 89816.exe is no longer available for download on VMware, however, it can be downloaded from elsewhere.  Don't say that I recommend that, however, it is an option and if you choose that route then ensure that the SHA1 checksum: 29ed0cc664df0a7caba542ad1d3e18eb3aed4e96

  Another option might be to use imaging software to create an image of the pHDD to a vHDD in a virtual machine and then see if the converter can handle the VM image to start correctly and install VMware Tools.

  Then the other option is similar to the second option that after imaging P2V start the virtual machine with the appropriate ISO Image and manually inject the necessary Mass Storage Controller and keyboard driver and settings in the Windows registry to enable the virtual machine to start and then install VMware Tools.

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• VMware Converter Standalone 5.5 does not display a Drop Down Menu for the Type of Destination

  Hi people,

  I try to use VMware Converter Standalone 5.5 for use with VMware Player and am not able to select the Type of Destination of my choice (I like to choose "VMware workstation" or another VMware virtual machine in the drop-down menu "Select the destination type").  Please see the image below where the combo box is not there at all.  Thanks for your help.  Hai

  

  This isn't a bug, it is a limitation of the converter. It is stated in the documentation. Converter considers that any machine under tension like physics. It cannot convert powered on Linux machines to hosted (i.e. Workstation/Fusion) destinations.

  A solution would be to convert it to ESX and then convert the (from) power off the VM power to the workstation.

  HTH

  Plamen