VMware on OpenSuSE 11 installation fails

Similar Questions

• Remove VMware completely when the installer fails - HOW?

  I had VMware Workstation 8 works fine on a 64-Bit machine of Windows 7.

  I bought 9 Workstation and tried to install it, and he says that he should uninstall version 8.

  Well, it failed.  Now, I can not install ANY version, version 7, 8 or 9, all versions.

  The installer is apparently unable to deal with an error to uninstall an earlier version. Why?

  [at this point, Monday, December 17, 2012, it is all fixed with VMware technical phone support. It involves several

  steps and a key was to use the utility Fixit from microsoft from here: http://support.Microsoft.com/kb/2438651/en-us

  and 1308 VMware knowledge base article http://KB.VMware.com/kb/1308 .

  Microsoft fixit scanner not found VMware, but she showed 'unknown' (or other?) and VMware

  technical support took the key to the article above of 1308

  {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6} HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\

  Paste in the registry key when asked by the fixit utility

  {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6}

  Who noted a mistake and fixed it.

  My options are:

  1 reinstall the Windows operating system and start from scratch (which will take a few days to catch up with installed programs).

  NOTE: DON'T DO THIS WITH THE SUPPORT OF VMWARE

  2. remove all vestiges of the previous installations of VMware so I can install without being told that the installer has found another version.

  NOTE: THIS WAS DONE BY THE TECHNOLOGY WITH THE HELP OF THEIR CONTROL PROGRAM REMOTE

  ------------------------------------------------------------------------------

  They have the option "/ clean" on the installer, which does not work, but it must do what he pretended to do so, remove all previous keys and elements.

  What a VMware solution that fixed what well Setup obviously cannot fix. It should prepare my computer so it will NOT report versions of VMware if I can install two versions 7, 8, or 9.

  -------------------------------------------------------------------------------------------

  With the help of VMware support, they were able to completely remove VMware and install VMware 9. I'm going to

  to try to writeup that they did, but the solution took about 30 minutes and many find and remove the

  Directories of VMware.

  I now have version 9 installed and it works fine.

  Post edited by: jeff92677 - TO EXPLAIN THAT THE PROBLEM IS SOLVED, AND THANKS to VMWARE for THE SOLUTION

  This feature was introduced in WS 7.
  Since then WS installers often think that older versions is present - and this happens even on systems that has never ever been before WS.

  On the issue of the port... This is normal. Most of the time it does not configure the port correctly during a first installation.
  You have installed Skype? -Make sure that remove you it temporarily.
  Then stop vmware - pass manually - change the
  C:\Documents and Settings\All Users\Application Data\VMware\hostd\proxy.xml
  -use an equivalent path for win7 of course - so that it uses the port you want.

  445

  Then restart vmware - pass and it works hopefully

• Cisco first Infrastructure 2.2 DVD installation fails

  We want to migrate to 2.2 first, but management does not want downtime of the device. Try to install the first 2.2 via DVD on a Dell R300 server and then import config of our apparatus to test questions. However, the NCS installation fails due to a problem file. Second burned DVD fails as well. Has anyone tried this before? Using a virtual machine (at this stage), is not an option.

  I have not tried, but don't wait until it works.

  The .iso (DVD) image is tailor-made for the installation on the device of Cisco NCS material. To install on any other material, you must first have the VMware ESXi hypervisor and install using the .ova image.

• As part of the certification NAS RHEL 6 guest operating system is recommended. We see that the STAF Installation fails on RHEL 6. Because of this issue, can we use RHEL 5.7 as guest operating system?

  As part of the certification NAS RHEL 6 guest operating system is recommended. We see that the STAF Installation fails on RHEL 6. There is no rejection of STAF for RHEL 6.

  Because of this issue, can we use RHEL 5.7 as guest operating system? If so, it will lead to problems when VMware Certification?

  Seems to have been solved in WB 3.0.1

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• Esxi5.5 scripted installation fails on "tools.t00: file not found" during the sequence of tftp

  Hello

  I realize this has arisen before but other that the proposed upgrade to v4 pxelinux.0 solution (which I did), I can't solve my current problems of pxeboot default due to #.

  Tools.T00: file not found on a network of esxi 5.5 installation

  That's what I see in the tftp log:

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: /esxi55/tools.t00 to 9.20.170.34:49234 serving

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: width option-> 167559911

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: blksize option-> 1408

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: file asked to increase much, BLKSIZE

  which according to VMware KB: ESXi 5.x fails to install when using PXELINUX is due to running a 32-bit version of pxelinux.0

  rpm of syslinux containing pexboot.0 is syslinux-tftpboot - 4.02 - 7.2.el5

  The other suggestion to avoid tftp to build the vmware host must use nfs in the boot.cfg settings. https://communities.VMware.com/message/2163034#2163034

  It was a post that not solved and the settings, I did to get the system to build via nfs instead of tftp failed

  If anyone has any ideas it would be great

  Concerning

  Paul

  Hi Paul
  Tools.T00 contains the iso files that you will need to install vmware tools.

  An installation without tools.t00 seems to be fully functional - but I'm not 100% sure on this subject.
  My suggestion has been designed for troubleshooting - so if possible to continue your search for the real problem.

  Your tftp can be used not the largest files x MBs - either you hit a timeout - because the package does not arrive fast enough.

  Ulli
  (here I made a testsetup without tools - if I find other missing features I'll let you know...)

• Converter Standalone Agent installation failed, error code: 1601

  Hi all

  I downloaded the VMware converter tryware version, to see if we can use this tool to create virtual machines from existing industrial PC.

  We intend to make a test remote backup to a XP to a laptop machine (to keep mobile in an industrial environment)

  I installed you VMware converter and disabled the firewall on both machines.

  I also disabled the network drives that are shared on the remote computer.

  When data powered the remote computer has been entered (ip address, username, PW, BONE family) and press us Next, the pop-up appears to deploy the Agent of Standalone converter.

  If you press 'Yes' to continue, after a minute or two the following message appears:

  -Converter Standalone Agent installation failed, error code: 1601 -.

  Can someone tell me what this error code means and how I can fix this error?

  Any help will be appreciated cincerely!

  Sincere friendships and thank you in advance,

  Marcel Lefèvre

  the Netherlands

  Can someone tell me what this error code means and how I can fix this error?

  Windows Installer error 1601 = The Windows Installer service could not be accessed. Contact your support team to verify that the Windows Installer service is properly registered.

  Additionally, make sure that the appropriate ports are open to allow the Windows agent to settle.

  Alternatively, you can manually install the converter on the remote system agent... and then try to restart the conversion (then there is no need to install anything).

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Error 25003. Installation failed to create the repository of the vCenter server.

  Hello

  I try to install vCenter Server 4.0. When the Installer tries to Creator repository an error pops up:

  Error 25003. Installation failed to create the repository of the vCenter server.

  I click OK and the installation of double-dipping.

  The last records in the Setup log are:

  Found "C:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe".

  Run as user logon administrator

  Found "C:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe".

  3221225477 returned by process

  ERROR: Failed to create the repository of VirtualCenter

  Displaying the Error 25003

  Description of our environment:

  • VCenter service runs under the SYSTEM account.

  • Autonomous mode eval version.

  • All ports are standard.

  • Using SQL2005 Express on the installation media.

  • I downloaded the trial version.

  • The server is VM on ESX with SP2 of Win 2003 x 86 CZE Standard Edition

  • The server is not in AD

  • Space 7.5 GB free disk

  I also tried to create the manully database but no luck.

  Thanks for the tips.

  After Installing Win XP SP3 ENG everything works OK... If the problem was really in the language version of the operating system...

• Comment Installer failed on centos 5.1 host 2nd CD

  I'm new to VmWare.

  I try to use Centos 5.1 as the host operating system. I installed Centos without problems.

  I installed the VmWare Server 2, RPM. Once again no apparent problem.

  But, when I try to create a new Virtual Machine and install either (Centos or HR 9) as the GUEST - OS. The installation runs through the first CD very well (in both cases).

  When the 2nd CD is put in, moments later, the installation FAILS, saying that it cannot read a given file or the CD is damaged. Both of these CDs are good. I've used them in recent installations.

  So, what am I wrong to VmWare Server 2?

  Or could it be, that VmWare 2 will not work with Centos 5.1 as a HOST?

  Please notify. I want to get this working.

  If you need to change the CD (or floppy disks) in a prompt, you must:

  CTRL-Alt to focus to the host.  Right click on the CD icon in the lower right side of the user interface and select Disconnect.  Then, either pass a physical medium or right-click again and select Edit, and then go to the new image.  Right click on the new icon and select Connect.  In the comments window to return the discussion to the prompt, and then click the mouse.

• I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  What should I do?

  Hello volvoxc70,

  I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.
  

  Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

  See you soon!

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• Install Snow Leopard Retail: Checking the Installation failed

  Hi all!

  I currently own a MacBook (mid-to-late 2010) with the identifier MacBook7, 1 and I want to reinstall 10.6 after a few questions. I got my retail disk, and it says that it cannot be installed on my computer. I check the logs and it says the following (not all that, only the errors, sorry)

  21-24 June at 20:18:03 localhost OSInstaller [140]: controls Installation failed.

  22-24 June at 20:18:03 localhost OSInstaller [140]: verification of the Installation failure:

  What puzzles me is that the reason is empty! Any help would be appreciated!

  (BTW, I tried to do a format, disc check and repair and all the "solutions" and none of them worked.)

  Sometimes the retail drives do not work if they are the same major version than the original installation disc provided with a computer. I just checked, but as the best I could with the information that you provide and it seems that your computer was shipped with 10.6.3 and this is the same version as the retail drives.  Yet, I wonder if there is a specific build characteristic which is absent in the commercial version.  Contact Apple support to get a replacement original disk.

• BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

  I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

  Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
  The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

  I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
  As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

  I tried to uninstall and reinstall several times but still get the same message

  Help, what do I do to fix this?

  File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

  Hello

  A question: could you please post you completely portable model number?
  I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

  In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

  However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past

• Skype installation failed; Code of 1632

  Im making a mistake like:

  Skype installation failed; Code of 1632
  The temp folder is on a drive that is full or is inaccessible. Free space on the disk, or else make sure you have persimission of Scripture on the Temp folder.

  I tried to use different POS and also I tried to install the .msi version but I get page not found error.please help me. I use windows 8.

  Try this:

  http://community.Skype.com/T5/Windows-desktop-client/help-need-a-way-to-run-Skype-w-o-install/m-p/38...

• DeskJet 3720: Driver Installation fails

  Base driver sw installation fails with the following error:

  Call to DriverPackageInstall returned error-536870329 for package ' < C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf

  Thanks PCalaminci. I got exactly the same error and same configuration (Win10 x 64 with bitlocker active). The solution is as PCalaminci suggests: temporarily disable the driver signature digital verfifaction (looks like HP delivered a driver with a valid Publisher unknown/no signature that is the cause of the installation of the bomb).

  Note: To temporarily disable checking of driver (on Windows 10) signing it is easier...

  1. In Windows, go to PC settings (you can search for it in the start menu).
  2. Click on 'update & recovery' on the left side.
  3. Click on "Recovery" on the left side.
  4. Click "Restart now" button under Advanced Boot.
  5. Select Troubleshooting-> advanced-> startup parameters and press Restart
  6. Press the number corresponding to the entry 7 "disable driver signature enforcement".
  7. Install the drivers. After your system restarts again once you won't able to install any unsigned drivers until you repeat steps 1-6.

  Above works even if you have your hard drive encrypted with bitlocker (you need not type in your recovery key).