VMware Server 2.0 en driver de Dominio

Similar Questions

• Windows 2003 Server R2 on vmware Server 2

  Hello

  I tried to install Windows 2003 Server R2 on vmware Server 2 using SCSI drives and the driver aviailable at vmware.com. Despite the dirver is responsible (FDD, F6 at startup, image etc.) the Setup program does not detect the disc.

  Can help?

  TIA

  Matthias

  Hello.

  You use the LSI or BusLogic adapter in your virtual machine?

• A virtual XP Server of VMWare machine with an IDE drive can be converted into ESX?

  Running ESX 3.5 update 3 and VC 2.5 update 3 (converter plugin 4.0.2).

  I have a couple windows XP virtual machines running on an old VMWare Server 1.x. I want to move them to our ESX cluster. However, they were built with IDE drives. Is it possible somehow during the conversion into ESX to pass SCSI drives?

  Thank you

  Converter will do this automatically for you.

  Make sure that you have a backup in the first place, in case something goes wrong.

• Cannot save the virtual machine in VMWare Server 2

  Hi all:

  I created a VM (12.1 OpenSuSE 32bits) in VMWare Workstation 7; then I copied it to a host VMWare Server 2.

  When I try to save the virtual machine via the web, the server fails (or at least interrupts the response from Web page), so I tried to save it via command line.

  After searching a bit I found this:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006160

  The question is now that I can't find any vmware-cmd anywhere, and when I run vmware-vim-cmd I get the following error:

  vmh2: / data/vmachines/postgresql-box # vim - vmware - cmd solo/registervm /data/vmines/postgresql-box/postgresql-box.vmx
  Connection failed: vim.fault.NoPermission

  So I'm stuck... someone can help me?

  BTW: what is ESX, ESXi and what version of ESXi is included in VMWare Server 2?

  Thank you very much

  Luis

  I can't tell you exactly what are the causes of the problem. What I would try (a solution) is to create a new virtual machine in VMware Server with the same specifications as the original one, then copy the two files hard in the new virtual machine folder and edit the .vmx file for the new VM 'OpenSuSE - 12.1 - cl1 - 000001.vmdk' use as its virtual drive.

  André

• VMware server Console Black

  Hello

  When I open a (Windows 2003 32-bit) VMware Server console I get the attached black console.

  When I make RDP to this server also I get the same console. I changed the display of color options, and even in this case, I get the same screen.

  This virtual server is hosted on ESX 3.5i and I migrated to anotehr ESX host, but the problem remains the same.

  No idea how to solve this problem?

  See the blog below.  We have came across this the other day because a customer's lack of space on the C: drive.  However, change registry entries remotely did not work.  I think somehow, by pressing a key combination when you use the VMware Console and a user who had never logged, we got the loading screen.  I think it is or .  But whatever it is, you have to check the registry database for colors.

  http://communities.VMware.com/blogs/PlanetVM/2008/12/01/the-black-screen-of-death

• VMware Server 2 - installation and questions backup

  I have an application that will use a backend SQL Express and IIS. I want to place this in a virtual machine running Windows 2008 Server on a Server 2008. We will not have many users using this app, so I think that the free server product would be nice. I worked with VMware Workstation for a few years but I did not too much with the server. I guess I can build the right VM in server, just let it run from there, correct?  All the elements 'need to know '?  Also, what is the best way to back up the applications data. I am not too concerned about the guest operating system, only data backup applications. Any help would be great... Thank you

  You can install Vmware server on the host computer and you can then create Win2008 VM.

  Yes you can have the virtual machine running in Vmkware server.

  For bcking the application data. You can do multiple ways.

  You can connecta USB drive to the physical machine and the virtual machine and copy the application data.

  You can map the drive to the virtual computer as a network drive on the physical host and copy it to CD / engraver of DVD or USB drive or another drive partition.

  Please allow point if it helps.

  Thank you

• VMWare Server Auto walk stop VM

  The documentation states that you must activate this option when installing VMServer 2. I installed 3 times now looking for AN option in addition to the locations on the disk and can't find anything. In the management console, there are options for start/stop with the host, however, virtual machines any "off" to start. The documentation says "Note to allow the virtual machine to be started and stopped on a Windows host, you must also select Allow virtual machines to start and stop automatically with the system during the installation of VMware Server.»

  Can someone tell me the buttons to activate this option?

  Thank you

  Bill

  If you select a computer and then click "Move up", it should become "activated" when it hits the sections 'Specified order' or 'Any order' and you can then change the settings to set the start or stop (as long as you have administrator privileges). Please see the attached screenshots.

  A witch hunt to start during the startup of the host if you have virtual machines on a data store that is not available at startup, for example sometimes if it's on an external or drive network rather than local.

  --

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• migration of vmware server 2 to esxi 4

  I'm new to esxi.  I have converted a vm from vmware server 2 with client standalone converter to ESXI 4.0

  The problem I have is that I turn on the new machine in ESXI and it does not start.

  VMware 2.0

  The virtual machine is running fine in VMware 2.0, the host is Ubuntu 8.04 Server, clients are;

  Windows Server 2003 Enterprise Edition - Services Terminal Server

  Windows Server 2003 Enterprise - MS Exchange 2003 domain controller,

  Elastix - Asterisk, Openfire, SugarCRM and AvantFax

  Ubuntu 8.04 Server - Drupal, SAMBA

  Can someone help me solve this problem?  I don't know no were to start digging because I'm new to ESXI.

  What VM you tried to convert?

  Source VM has IDE drives? If so do you have attempted to assign also on ESXi?

  André

• VMWare Server 2.0 to ESXi 4.0 update?

  I have a system running VMWare Server 2.0 on RHEL 5.4.

  I would spend my VM to a new server ESXi 4.0 U1.

  Can I use the files on hard drive of the server 2.0 VMDK with ESX 4.0 Server?

  Thanks in advance.

  VMware server uses hardware version 7 by default. ESXi uses hardware version 4. You will need to use the converter to go beyond the material differences.

  Post edited by: DSTAVERT

  I'm sorry that you have posted in the forum ESXi 3.5. ESXi 4 uses hardware version 7

• VMware server wiped the host during the generation of the comments operating system

  Gidday,

  System:

  HP dc7800p sff

  Slackware64-13

  Kernel: 2.6.31.4

  VMware serve 2.01 - build 156745

  I tried to build a guest of windows on the network via a console on vmware server

  We use a tftp boot server and use ximage to copy the image on the machine.

  Everything seemed to go well when my screen was filled with random colors.

  Restarts it tried to boot into windows, it is thoroughly confusing, because it's a dedicated linux machine.

  After starting on a rescue cd, it seems that my old layout (4 sheets), it is now 1 NTFS partition and this partition is filled with a windows file structure and the corresponding files.

  I am always tring to understand how a virtual machine that is supposed to write to a file has managed to clear the contents of my hard drive.

  Someone at - he had similar experiences or ideas on how this could happen?

  See you soon!

  Dave

  Well Yes, there is a SCSI device to passthru in there as well according to what/dev/sg0 described on the host that the client tried to do with this device, which may well explain the host getting wiped.

  Safer to come just the hard and then create a new VM on the Server 2.x using this hard even though it must be said that I have never suffered this deliver me or heard someone else either.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Problemas com Rede - VMWare Server 2.0.2

  Estou com um problema great. Ocorre com todas as minhas maquinas

  tolls. Use a VMWare Server 2.0.2 atualizei back versão

  that o problema resolveria mas continued ocorrendo.

  APOs

  some tempo em execução a rede simplesmente Plaça loses a conexao

  pingar para, to EU acts e reativar volta, to EU access as

  of voltar e alterar Propriedades para a mesma option anterior, e can

  Sair volta a pingar e volta o status of rede usually. Have any

  training of o driver driver of Rede da placa virtual? O ESXi pode

  resolver? A logging ESXi e paga OU gratuita?

  Guga, is o seu laptop roda Windows 7 e sober ele você instalou VMware Server, then o pode ser o seu problema este: o VMware Server e suportado sober o Windows 7 ainda nao. Veja Manual o produto, pag. 25.

  Como alternativa, VMware Workstation ja mourned o Windows 7 o, e bem but funcionalidade excellence. But a front a VMware passed a suportar o Windows 7 no also VMware Server, como mas ele e free, nao tem a prioridade.

  VMS Made in Brazil

  PS: Please consider dar pontos has este or any poster caso seja util lhe outro.

• Control using ActiveX MKS with VMWare Server 2 - qsp.js - missing?

  Hello

  I have VMWare Server 2 got up and running, created a few virtual machines was playing with her. I'm try VMWare to see if I want to move to Microsoft Virtual Server 2005. One thing that I really liked Virtual Server 2005 is the ability to use my virtual machine in an ActiveX control (I know... I know... "I like being able to tab between virtual machines while I am already IN the admin of the site). I downloaded the CAB file, extract the files, installed the plugin and registered the DLL by following the instructions in this article:

  http://KB.VMware.com/selfservice/microsites/sc_search.do?cmd=displayKC & docType = kc & externalId = 1002342 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 1390001 & StateID = 0% 200% 20859477

  I entered my config in the sample HTML IE, and when I open the HTML file I get a black box indicating the plugin is running, but there is no connection. When I turn on debugging in IE, I get an error that says:

  Line: 7

  Error: 'Querystring' is not defined

  In the debugger window, it shows the line fails to instantiate an object qsp. There is a reference to script in a file called "qsp.js" that contains the object that he tries to instantiate in the HTML code. Hmm, where is qsp.js? It is not in the cab file and I can't find it on my hard drive. I downloaded and installed the vSphere SDK and can't find it in one of these directories or the other? I looked in the temporary IE files, but it isn't here either.

  Any ideas on where I can get this little ole JavaScript file? It's all of that I need connect to my VM...?

  I was wondering if there was another (easier) way to achieve what you want. This rings a Bell for many years when I used to use Virtual Server. I use the VI/vSphere Client to manage my server 2.x hosts but unfortunately is not available with a gentle 2.0.1 installation.

  Always forgetting the missing javascript file, it works if you hard code the parameters to the connect method? Mine is:

  MKS. Connect ("192.168.0.12", 902, '[standard] XP Pro VPN / Windows XP Professional.vmx","username","password");

  Note the slightly weird for the VM name search syntax (although I suppose at this point as to the format, it's wanting). That's what you get using the command "vmrun" with the parameter 'list' to show how VMs. ex:

  vmrun t h https://yourserver:8333 / sdk -u user_name Pei password server list

  Obviously, if we cannot get the connection to work there is little interest in the conclusion/autour missing Javascript coding.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• How to refine the configuration of Vmware server on windows host

  Hello

  can someone explain how to refine the Vmware host windows server edition?

  Hello

  First, you decide what you want to use the VMWARE server.

  If you want to use vmware server for only to keep the plane comments at end of test system administartion, during the installation of VMware server you will need to customize your installation.

  In the Customize installation disable the Modules Perl script which are used for development purposes, after installing the server, go to services & disable services unwanted, assume that you use no DHCP & NAT, then disable these services. In doing so, it will save the memory & performance increase of you host mechine.

  When you create your mechine comments try to reduce unwanted devices, how to remove the floppy drive if you don't want to use in the mechine comments. like this, try to reduce the additional devices you use rarely, if you're runnin server edition comments mechines, then try to reduce you is display resolution, which will give a good performance.

  Kind regards

  Jak

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• Network card works no-Windows home server on VMWare server 2.0.1

  I installed Windows Home Server on VMWare server 2.0.1 and the card in Device Manager Ethernet OS says "this device cannot start (code 10)". Device Manager shows AMD PCNET Family PCI Ethernet Adapter and the current drivers are also installed. I installed the Home Server by selecting other 32 bit OS in the virtual machine. Also, I removed the network card and reinstalled the adapter in the control panel of VMWare. It shows connected and I fixed it to connect at power on, it is also a bridge connection. I don't know what to do or check. I thought to reinstall the operating system by choosing server 2003 32-bit for Windows Home server is based on this. It's probably something simple. Anyone have any ideas?

  Close the comments.  Edit the vmx by hand file and change the line ethernet0.virtualDev = "vlance" to "e1000" (add the line if it does not exist).  Back-light the prompt and install the driver for Intel E1000 network map.