VMware server Console Black

Similar Questions

• Arrow in VMware Server Console 1.08 - problem keys Linux 1.09

  Hello

  After an upgrade sometimes ago, I found a strange behaviour on VMware Server Console 1.0.8. I tested VMware Server Console 1.0.9 and it behaves the same way.

  The problem is: arrows do not function correctly, and the 'Alt Gr' key does not work as expected (by pressing "Alt Gr" + a key provides as it is pressed without "Alt Gr". Sometimes "Alt Gr" beahaves like 'Enter')

  The behavior is always reproducible on all tested computers with VMware Server Console 1.08 - 1.09 on Linux and all tested clients.

  Platform customer information:

  VMware Server Console 1.0.8 build-126538 and 1.0.9 build-156507, openSUSE 11.1, Linux 2.6.27.23 - 0.1 - #1 SMP, KDE3 and KDE4 default

  Server:

  VMware-server - 1.0.6 - 91891, openSUSE 11.0, Linux 2.6.25.20 - 0.1 - pae #1 SMP

  Guests:

  Windows XP SP2, Windows Server 2003, Linux OpenSuSE 11.0 & 11.1

  Thanks in advance for your suggestions.

  The problem is on the server. On the host that edit you/etc/vmware/config

  I had the same problem with a linux host. Here, you will need to edit this file and Add following lines in/etc/vmware/config

  xkeymap.keycode.108 = 312 # Alt_R

  xkeymap.keycode.106 = 309 # KP_Divide

  xkeymap.keycode.104 = 284 # KP_Enter

  xkeymap.keycode.111 = # 328 Up

  xkeymap.keycode.116 = # 336 down

  xkeymap.keycode.113 = # 331 left

  xkeymap.keycode.114 = # 333 right

  xkeymap.keycode.105 = 285 # Control_R

  xkeymap.keycode.118 = # 338 Insert

  xkeymap.keycode.119 = # 339 Delete

  xkeymap.keycode.110 = # 327 home

  xkeymap.keycode.115 = 335 # end

  xkeymap.keycode.112 = # 329 front

  xkeymap.keycode.117 = # 337 then

  xkeymap.keycode.78 = 70 # Scroll_Lock

  xkeymap.keycode.127 = 256 # break

  347 = xkeymap.keycode.133 # Meta_L

  xkeymap.keycode.134 = # 348 Meta_R

  xkeymap.keycode.135 = 349 # Menu

  .. then all the keys will function correctly on the comments.

  Look at my blog: http://johannwein.wordpress.com/

  PS: in my case - I on localhost - server - and client...

  Another thing is: given that the upgrade from Ubuntu 9.04 to 9.10 - VMware Server Console 1.09 does not set up. You have a lot of mistakes by vmware - config.pl

  But it's another question good luck!

  Johann

• Generate url for virtual machine installed on vmware server console programmatically

  Hello

  I want to generate URLs for machine vmware console located on vmware server. Are there examples of available in c# code? Any help will be really good.

  Thank you.

  Hello

  There are already several posts/Articles on this subject. What works for ESX should work for VMware Server. The misfortune is that it should be avoided for several reasons:

  (1) there are only a limited number of "consoles" allowed for a given server of VMware

  (2) RDP/VNC is a tool much better for this as there are no such limits

  (3) the security of this method is somewhat limited

  (4) more than one user can access the same VM without protection of the user (essentially a struggle for control)

  So in general, it is best to RDP/VNC in the virtual machine is to use the console.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• 64-bit applications do not convert to VMware Server Console of ESX3i

  Hello

  Because of performance problems, we try to convert a machine Console VMware Server 1.0.4 for VMware ESX Server 3i, using VMware converter standalone client 4.0.1 vcentre but it is a failure with the answer "the destination can't stand not 64-bit clients.

  We believe that ESX3i supports 64-bit machines - there is an option to create one, if we were to start from scratch.

  We also tried to import directly via the "Import a virtual appliance" option on the 3i server itself, but he expects a file ovf rather than an egg file, and so we get an exception "system out of memory.

  Can anyone recommend the best method of conversion of a 64-bit computer?

  Thank you

  Paul

  Welcome to the Forums - Yes ESXi support 64-bit VMS but you needs to ensure that material that esxi installed supports 64-bit by confimrining in the server BIOS ESXi VT i and s 64-bit enabled

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• error when starting console vm on vmware server 2.0.2

  Hello buddies im new in vmware, I installed vmware server on debian cli 6 and got works well, but the problem, when I try to start the vm console it gets error im using firefox 3.6, 3.6.28 and internert explore Windows like web management vmware server

  

  

  It was resolved by the kvm module remove

  Thank you

• No web console with the version of VMware Server is a core 2.0.1 and 2.6.31 - 10-generic in Karmic AMD64

  Hello

  I've successfully used vmware - server.2.0.1_x64 - modules - 2.6.30.4 - fix.patch to build modules on my laptop running Ubuntu Karmic Koala. VMware Server version is VMware server 2.0.1 - 2.0.1 - 156745.x86_64.tar.gz, and I'm running it with kernel 2.6.31 - 10-generic. The question I have is that while the web console seems to be running on port 8333, I can't get an answer from him. Has anyone else encountered this problem? See you soon.

  OK, I got it to work. Try this in a terminal and let me know if it works for you too:

  VMWARE_USE_SHIPPED_GTK = force. Mozilla/Firefox/*.default/extensions/[email protected]/plugins/vmware-vmrc

  See you soon,.

  Peter

• Where have the VMWare Server "client / console ' downloads went?

  either he had formerly downloads as "VMware-console - 1.0.6 - 91891.exe" who were just the client end.

  Such as those mentioned in the: http://pubs.vmware.com/server1/admin/wwhelp/wwhimpl/common/html/wwhelp.htm?context=admin & file = manage_server.5.6.html

  I can't find a download like this for 1.0.8 and I think I'm having a problem of compatibility with 1.0.6.

  I don't really need to install the whole invasive Server installation just to get the client for my office.

  Any ideas?

  Maybe he underwent a change of name? But I'm not in the lists mentioned in the 'names have changed.

  Thanks in advance for any help.

  Feeling a little down on our first foray in VMware at this point...

  I feel like VMware dropped us in a dead-end street with the strategy that we are...

  Same place, that downloads have always been.

  Go to the download page for the server.  Click the link to download under Server version 1.0.8.  Accept the EULA.  On the download page, there is a link for the Client Windows VMware Server package.

• VMware-server screen of the console value

  I am running vmware-server on my linux (CentOS) machine so that I can have MS Windows.  The entire Setup is right for me.

  I just upgraded to version 2 which has MS Windows in a special console window.  I would like to than the console to start on the second DISPLAY window (: 0.1) so that I can use Firefox normally on DISPLAY: 0.0.  How can I?

  Vmware-server is overkill for what I'm doing?  VMware player is available for linux?  Should I use Firefox to start?

  I think that its an exaggeration. You probably want to use VMware Workstation to this... it allows you to set the number of monitors used by a virtual machine. Or use VMware Player 2.5... It is available for Linux.

  Edmond

• Any WebAccess to VMware Server 2: Proxysvc, SSL exceptions, uninitialized session id context

  I am quite new to VMWare Server. [All seemed well in tests, connected to https://localhost:, RequestProcessor] error during the processing of request/view/destroy action: please sign in.

  But they do not correspond with trying to access the https.

  Does anyone know how to debug this and be able to use the https port again?

  shecki wrote:

  We are trying to solve a problem with FF3.6 and VMserver2 in inofficially VMware community too.

  First point on the road was to reactivate the SSL2 protocol in the subject: dialogue config.

  >

  > securitiy.enable.ssl2 = false-> true

  Now, the user has access to the web interface, but the console is dead. Normally on a click inside the black console with the play icon window that should open a new window, but all you get is a timeout. If you make a shortcut to the virtual machine on the desk, you get console access...

• Replacement for VMware Server 1.0

  Hello community

  I'm running a few hosts CentOS with VMware Server 1.x 5.x various hosts as CentOS virtual computers, the legacy Netware servers and some Windows machines.

  Now I need to put in place the new hosts with CentOS 6.x to enjoy some of the things fantasy that comes with this new major release (especially things like the handling of SSD and BTRFS).

  However, VMware Server 1.x only installs on CentOS 6 and so this combination is not an option.

  VMware Server 2.x (even if it would not work what I do not know) is a no-go, I don't like the web directors at all and would really like to have an administration like the VMware Console tool, which used to be the administrative tool for server 1.x.

  I would not mind spending the money for it, so there is no need to be free (business environment), but thousands of dollars of course aren't in the budget for it.

  However, many VMware products seem to be a mess for me (sorry...) and even worse, they all seem to be a bit inflated.

  What I choose today, VMware Server 1.x was exactly the thing I need, without all the bells and whistles, subsequent proceeds provided with, but if possible with a platform independent (Linux + Win) administration tool?

  Is there any "weight light server grade product of virtualization" VMware plus, which brings the necessary basic features and runs on modern linux guests?

  I have already evaluated VirtualBox and KVM and got both work, however, I have used VMware now for more than a decade at least I want to ask the community for recommendations before moving on to a completely different virtualization platform.

  Thank you to for your advice!

  Then take another look at work station - there now the abilitry to function as server hosting VMs - or you can go to the bare metal hypervisor and run ESXi that will install directly on hardware, eliminating the need for CentOS - there is a free version available that as well.

• Con ISA Server while Red VMWARE Server 2

  Hola Foro... paso a form el problema as tengo, quiero hacer funcionar an ISA server con UN ADSL (2 while RED, y LAN WAN)

  Esto lo quiero hacer con a HOST VMWARE SERVER Windows 2003 bajo, red HOST tiene el 2 while

  1 LAN (red interna con DHCP)

  1 WAN (ADSL Modem)

  Como puedo hacer para that the WAN solo tome del IP ADSL modem?

  Se you can hacer esto con VMWARE SERVER?

  No tengo good claro todo el tema no redes office, bridge, the host-only, etc. want help me podrá a resolver este problema?

  Desde ago thank su ayuda!

  PD: the idea in a futuro no muy lejano are add mas while al physical RED HOST connect 1 ADSL o mas para enlace an Internet.

  Standards organizations.

  Hola Guson,

  MI primera mid-week're Instalar ESXi (free) donde estas Running Windows 2003 con VMware Server, dado para el tipo tasks than estas queriendo perform lo veo mas robusto y seguro.

  Sober crearias UN vswitch0 donde poner una placa para management ordered ESXi console y lan. In el segundo vswitch colocas segunda placa a modo DMZ.

  Luego creas una vm con back while y colocas una in cada cada vswitch portgroup.

  If going to por the opcion of VMware Server.

  ACA you paso UN link muy bueno para veas rapidamente networking.

  http://www.carbonwind.NET/VMware/VMwareServerNetworkingOptions/VMwareServerNetworkingOptions.htm

  I think the config seria, put both while bridged, en mejor y una conectarla al modem adsl, the other campaign directly has the LAN.

  CREAS una vm, y the POWA of the DMZ the sober colocas vmnic that is located in the DMZ, then the other campaign placed the sober colocas the LAN.

  The Plaça of the DMZ the dejas in DHCP, the Plaça of the LAN IP fija das.

  Should funcionarte ok.

  Saludos

  Diego Quintana

• Oracle listener does not not on vmware server 2 guest OS Centos

  I write here because I think that this problem can be related to my network on the host vmware server setup 2 OS.
  I installed Oracle 11.2.0.1 on Centos 5.5 64 bits in a guest VM with a Windows 7 64 host OS. The Centos operating system runs well and the Oracle database that I created works fine locally (i.e. from a terminal in the vmware console or telnet/SSH window). The networking of virtual computer is set to bridged and I can ping the VM or ssh on the virtual machine to any other machine on the network.  However, I manage to tnsping database from any other machine on the network. When I try to tnsping from windows (with the input of appropriate tnsname) machine, I get a TNS-12541: TNS: no listener. When I try to tnsping from another Linux environment (with the appropriate tnsnames entry), I get the following:
  $tnsping demo
  AMT Ping utility for Linux: Version 10.2.0.1.0 - Production on January 28, 2011 00:36:13
  Copyright (c) 1997, 2005, Oracle. All rights reserved.
  Use settings files:
  /U01/app/Oracle/product/10.2/Db_1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.74)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = demo)))
  AMT-12560: TNS:protocol adapter error

  Here's my tnsnames entry in the linux environment from which I will carry out the tnsping (192.168.1.74 is certainly the IP address):

  DEMO =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.74)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = demo)
  )
  )

  The name of SID is "demo" and the listener is running. Here's the lsnrctl status output:

  / home/oracle > lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on January 28, 2011 00:26:32

  Copyright (c) 1991, 2009, Oracle. All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  STATUS of the LISTENER

  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Start date January 28, 2011 00:04:26
  Uptime 0 days 0 h 22 min 6 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /opt/oracle/11.2.0.2/network/admin/listener.ora file
  The listener log file /opt/Oracle/diag/tnslsnr/demo/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=demo) (PORT = 1521)))
  Summary of services...
  Service 'demo.localdomain' has 1 instance (s).
  Instance of 'demo', State LOAN, has 1 operation for this service...
  Service 'demoXDB.localdomain' has 1 instance (s).
  Instance of 'demo', State LOAN, has 1 operation for this service...
  
  The command completed successfully
  AND lsnrctl service:
  / home/oracle > lsnrctl service
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on January 28, 2011 00:41:04
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  Summary of services...
  Service 'demo.localdomain' has 1 instance (s).
  Instance of 'demo', State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service 'demoXDB.localdomain' has 1 instance (s).
  Instance of 'demo', State LOAN, has 1 operation for this service...
  Managers:
  "D000" put in place: 0 denied: current: 0 0 max: 1022 State: loan
  DISPATCHER < machine: demo, pid: 3432 >
  (ADDRESS = (PROTOCOL = tcp (PORT = 13848))(HOST=demo))
  The command completed successfully
  / home/oracle >

  I must admit to be a bit confused about the 2 separate managers and the 'demoXDB.localdomain '.

  I copied the file listener.ora to a similar environment that works correctly, stop and then restart the listener, checked my repeatedly tnsnames entries etc. I wonder if the problem may be related to the fact that this environment runs in a virtual machine. Maybe some special network configurations are required for the NIC VM - I solved many problems of sqlnet over the years, but it baffled me. Any help is very appreciated.

• Network adapters disconnected on vmware server

  After I set up a virtual server for Novell netware, it identifeid speed of the virtual machine to each NIC that 1000, so I tried to change the speed of virtual machine from 100 to 1000.  Now I can't connect to the remote VM machine.  At the level of the server, each NETWORK adapter is noted as disconnected.  Because it was his internal IP address via DHCP from another Novell server that is no longer, it connects to, I put a static IP address to the server console.  Still nothing rmotely.  What should I do to fix my mischief.

  In general you should just be able to put 4.1 above the location of 4.0 x. AFAIK, some configurtion files gets lost on ESXi and you create a backup of them (if you wish). Read page 59 of the document I have posted the link to.

  Guests should not affect, however, if possible, make a backup of your guests. If they are associated with a shared storage, disconnect it.

  Work through this 55 page document: http://www.vmware.com/pdf/vsphere4/r41/vsp_41_upgrade_guide.pdf

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Failed to get the log in page of VMware Server

  Hello

  I'm new to the forum so apologies if I am posting this in the wrong place.

  I installed VMware server to December 2008 to use Win XP on it because my laptop is preinstalled with Vista.

  It worked all fine and I used it for a few months.

  However, I have not consulted for like the past 8 months. Now, I want to once again since, but have not been able to.

  If I remember correctly, I used to access the console remotely via Internet Explorer simply log on and it works.

  But now when I try - Internet Explorer 8 comes with the "Internet Explorer cannot display the webpage" page and Firefox comes with its 'unable to connect' page.

  I tried to go back to IE7 and also repair the installation (by running again the Setup file), but none worked.

  After accessing services.msc - I found that all VMware services are or may be given except on the VMware host Agent that does not start.

  It comes up with the error message "Windows could not start the VMware host on Local computer Agent. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service-1-specific error code. »

  I don't know what to do with it and how to address this issue either.

  Any help on this would be much appreciated as I need to check what is on this XP machine.

  Thanks in advance ~

  Hwciua4i wrote:

  However, I don't know what they mean by disabling the browser service.

  Open the service manager in Windows and you can see all the services that are running. One of them is called "browser".

  What about rename it pass it directory - do you want to say to just change the name of the folder called "pass" to the place that I installed

  VMware Server? If this name should so I change to?

  Yes. I suggest "bbrbblllwurbschgarbel" or something that is more readable.

  And regarding the uninstalling and reinstalling VMware Server 2.0 - I wanted to ask if that would erase / affect the virtual machines I created?

  I tried just to fix the installation but was afraid to uninstall & reinstall.

  No it does not affect the guests. If you want to be absolutely sure, create a copy of the virtual machine comments (copy the directory parent of all guests and all the money).

  Moreover, I had VMware server operational on this laptop before Vista - it's just I hadn't touched for a long time and now I

  cannot make it work ~

  If she had run once it does not mean he always runs on a non supported host OS. A simple patch that changes some .dll could slow everything down.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Are there known problems of VMware Server transition to the Workstaton

  Hello

  As VMware Server end of support announced ( http://www.vmware.com/support/policies/lifecycle/general/index.html) I was looking at transition to VMware Server 2 of VMware WorkStation. I have a Red Hat Linux host machine that has a VMware Server running on it with a single virtual machine. I was hoping to find out what are the problems might face to make the transition from one environment to another.

  I am aware that the server and the workstation cannot co exist on the same system, so basically I need to uninstall the server and install the work station. I am also aware that virtual machines are generally compatible between the two products. I also read on the comparison between products. ( http://vmfaq.com/entry/5/ )

  Are there other traps?

  Thank you

  Varun

  Hello

  You can download the VIX API (it contains the text console vmrun command - he didn't need a desktop case to run) from here.

  If you install the VIX API in a remote machine (not here where the workstation it is installed), you will be able to administer the computer zone in a passing distance.

  Of course, you can do the same thing on the workstation itself locally, using vmrun/vix it is included with workstation.

  Here you will find a tutorial on using vmrun to administer the virtual machine.

  Hope this helps

  Best wishes / Saludos.

  Pablo

  Please consider to assign all useful or correct answer. Thank you!! - Por favor considered premiar any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog