VMWare Vcenter Server Appliance 5.5.0B without SSL?

Similar Questions

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• VMware vCenter Server Appliance 5.1 is not Autostart cluster

  Problem:

  After a VMware vCenter Server Appliance failure does not start automatecly.

  I have configured to start automatecly to each host, but it does not start automatecly.

  My configuration:

  Shared infrastructure-plate-forme PowerEdge VRTX with 3 servers running

  -3 x VMware ESXi 5.1.0 (799733)

  -1 x VMware vCenter Server Appliance 5.1

  -Servers run as a cluster with HA.

  Unfortunately Autostart VM is not supported in a Cluster, and so the settings are ignored. VM in clusters must be turned on manually (or using a script,...).

  André

• Activate the VCA Mode of VMware vCenter Server Appliance

  Hello

  I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

  I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

  How can I activate CVS when vSphere does not work?

  Thank you

  Jeff

  Hi Welcome to the communities,

  This one is a bit complicated

  You have:

  1. turn off all VMs on Host1 (while vCenter device is on Host2)

  2 bring Host1 on Cluster, select CVS clustered.

  3. put all the virtual machines on Host2 (also vCenter device)

  4. connect on Host2 directly to vSphere Client Windows

  5. remove the vCenter inventory unit

  6. connect on Host1 directly to vSphere Client Windows

  7. the data store when the appliance and add it to the inventory of research. Power on

  8. connect the device with Web client or vSphere vCenter

  9. move the second host in the cluster

  And you're done

  Concerning

  Tim

• VMWare vCenter Server Appliance / 2012R2 Windows domain

  Hi all
  I've recently updated my domaincontrollers to R2 2012 WIndows, and I installed vCenter on a vm through the ovf appliance. After you have configured the vCenter in the web gui, I can join the domain successfully and the virtual center appears in the field. After a restart of the virtualcenter, I'm not able to find the field in the client to vcenter under permissions. (version vCenter: VMware-vCenter-Server-Appliance-5.5.0.5101-1398493)

  Someone at - it a tip on how to fix this?

  You must login to webclient using [email protected] and navigate to the SSO configuration. Select your ad that you added and make this default domain. This makes the announcement should appear in the menu drop-down.

• VMware vCenter Server Appliance 5.5 Active Directory domain are not under permissions

  Hey,.

  I use VMware vCenter Server Appliance 5.5.

  All Services are running correctly:

  

  I configured tge under authentication to Active Directory Service:

  

  But when I try to give permissions for groups and users to the AD.

  But it is not listed in the vsphere Client and WebGUI

  

  

  Can someone help me solve this problem?

  Are there any newspaper I can verify or any idea to check this?

  You will need to go to your SSO Configuration and set your ad as default domain.

  

  Once you do this, it will be displayed in the list.

• I did a stupid thing: I suspended "vmware vCenter Server Appliance" and now I can't connect to it more

  Hello

  First some info on our system. We have a group of three hypervisors and a few terabytes of storage on two devices of Synology. VCenter Server allows us to control everything. This vCenter is accessible via a dedicated ip address. Then I opened my 5.5 vSphere client on my workstation, check the name and credentials of the vCenter and hup I can admin everything.

  Now, what I did with my sleepy head? I suspended the so-called "unit of vmware vcenter server. And my vsphere client lost my connection with the server vCenter Server immediately.

  I can't ping this address ip-plus.

  I'm afraid that ssh is disabled.

  Installed on virtual machines seemed well-oiled, I can access it by using RDP. So no worries for employees using them.

  So I would like to be able to restart this device "vmware vcenter server" but I don't know how to do it.

  All useful ideas would be nice.

  And Yes, it's a really stupid mistake.

  Thank you

  Paul

  Point your client vSphere host your vCenter ON VM's.  You can then start the VM vCenter.

• VMware vCenter Server Appliance - Linux?

  Anyone happen to know what version of Linux appliance 5.0 or 5.1 is built with?

  Thank you

  I can't find any official documentation, but I think it's SUSE Enterprise 64-bit

• VCenter Server Appliance fails without VT in nested ESXi 5.1 support

  I am trying to run vCenter Server Appliance in a nested ESXi 5.1 64-bit environment.

  At the start of the vCenter Server Appliance, it fails with:

  This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.

  This host does not support VT for more information, see http://VMware.com/info?id=152 .

  My configuration is:

  Hardware Intel Serverboard S1200BTS

  Intel Xeon E3-1230 V2 3.30 GHZ CPU

  (This processor supports VT + EPT)

  BIOS Intel VT is enabled

  Intel VT for directed IO is enabled

  Latest version of the BIOS

  HW-ESXI 5.1 vhv.allow = "TRUE" is defined

  VM-ESXi 5.1 CPU/MMU virtualization - Intel VT + EPT active

  vCenter Server Appliance has been installed with the VMware-vCenter-Server-Appliance-5.1.0.5200-880472_OVF10.ova file.

  What I'm missing here?

  MNGZ wrote:

  Set vhv.enable = 'TRUE' in my nested ESXi 5.1 makes no difference.

  Did you put this in the .vmx file for your ESXi 5.1 VM?

• vCenter Server Appliance "URL of repository" evil

  Hey guys,.

  new to this entire VMware environment.

  I am trying install Win Server 2012 and in order to get installed it, I understand that I have to update my current version to 5.0.0 VMware - 455964 I have for later. I was hoping that it would accomplish this by accessing the VMware vCenter Server Appliance in the section "Update." But when I hit 'check updates' I get a:

  Impossible to check updates (error update server being contacted. Please check the network configuration. Couldn't resolve host ' VAPP - updates.vmware.com' URL: http://vapp-updates.vmware.com/vai-catalog/valm/vmw/8e70f769-fd50-4a7a-bee2-2c0d945e23b0/5.0.0.3324.latest/manifest/manifest-latest.xml) on Friday, June 20, 2014 3:02:21 PM GMT - 04:00

  
  

  Error...

  
  

  So I try to figure out how to invite to get the URL and (current) right to check with success to FIND an update. And if all goes well install it...

  
  

  What may be a DNS issue? If so, I have not found a place for the DNS entry. Must be outside of the server appliance?

  
  

  Can you help me? Let me know what else I might need to provide to you guys to get somewhere with my question

  
  

  Thank you

  
  

  lookush
  

  To configure DNS on the vCSA change the Type of address to SLAAC-IPv6 first and you can add DNS server address and the host name.

  Check this blog for more information: How to configure the vSphere 5 vCenter Server Appliance

• Download link for vCenter Server Appliance (Linux)

  Hello

  I have the following situation: we bought VMware this week for our internal servers and want to administer the virtual machines with Linux (and only with Linux).

  I downloaded VMware-vCenter-Server-Appliance-5.1.0.10000-1065184_OVF10.ova and imported this virtual machine. I can now administer all our virtual machines within a browser running on a linux client.

  This virtual machine is running SUSE Linux Enterprise 11 (64-bit) and I would like to download these packages install to put in place a dedicated linux server (vShpere Web Client Version 5.1.0 build 1063329, customer-integrations-Plug-Ins: VMRC Version 5.1.0 Build 1060398 and Support Client Version 5.1.0 Build 832030)

  I downloaded tons of ISOs and OVF from VMware today but found nothing to install on a Linux server dedicated (except these tools of comments).

  Can we put a link or give me a clue where to download or in what ISO is?

  And another question is: is it possible to install

  Thank you

  Bernd

  The Linux version of vCenter Server is only available as a Virtual Appliance that you downloaded and not as a separate package such as the version of Windows.

  André

• If the patch management can be done by VMware Update Manager in vCenter Server Appliance as similar vCenter Server

  Hi friends,

  If patches of the host management can be done through Vmware Update manager vCenter Server Appliance as in vCenter Server.

  Tell me other differences between them...

  Kind regards

  Sirot Vijay

  1. Yes we can connect to the device using the vSphere client.

  2. in the installation of the update manager VCenter information will ask and he will automatically fit no special measures required.

  3. no conflict. Its just like you have two vCenter servers, but you can not have two server vCenter managing the same hosts.

  -Avinash

• VCenter Server Appliance 5.5 update w/o VUM

  I'm Manager my first vmware environment. We are a small company and using the Essentials package. I have two hosts upward with a vCenter Server Appliance 5.5 Build 2063318. I'm looking for a way to update the device for security patches. I have not been able to find how to do that when we don't have a Manager Update server configuration. I downloaded the .iso file but have not been able to find all the commands that will allow me to manually install the package. Any help is greatly appreciated.

  Note that you must connect vCenter Server Appliance Web Console (VAMI) address: https://vCenterServerIPAddress:5480/ NOT the vSphere Web Client that listens on a different port.

• Location of the vCenter vCEnter Server Appliance 6.0.0 vs Linux plugin file

  We have a plugin where we were using vCenter 6.0 hosted on a Linux server.  I could get my plugin files in /var/lib/vmware/vsphere-client/vc-packages/vsphere-client-serenity and /import/storage.

  We then deployed a vCenter Server Appliance 6.0.0 our plugin and it has a different directory structure.  The structure of directory changes to /var/lib/vmware.

  Where can I find the folder of vsphere-client-serenity or its equivalent.

  Or plugins to treat device unlike a vCenter 6.0 linux host?

  
  

  Thank you.
  

  I found it in/etc/vmware/vsphere-client/vc-packages/vsphere-client-serenity

• Open connections of hosts and vCenter Server Appliance

  We have number of ESXi hosts configured in our environment with vCenter 5.1, far ssh is open to all in order to access all hosts via SSH. Although authenticating the users available but, even then, the issue raises so bound / restrict administrators IPs or subnet of the network for security reasons. Will be the same for vCenter Server Appliance.

  Also can we restriction of IP level for the Vmware Client users, good that now everyone can make the connection between vSphere and vCenter cleint. Please advice

  Hi friend

  Please see below the resources needed to achieve the same on ESXi

  http://www.definit.co.UK/2013/10/vSphere-Security-Advanced-SSH-configurations/

  Restrict access to the ESXi host Console - see the lock Mode. VMware vSphere Blog - VMware Blogs

  Limit the vSphere Client access to IP or network - Firewall 5 ESXi & raquo; System administrators