Satellite P300D - 15 c - software of 3D scanning is very slow

Similar Questions

• Satellite Pro L630-167 - Win 7 connection to the very slow connection menu

  Hello

  I have a Satellite Pro L630-167, which is connected to my network works.
  I have this problem where the screen stays just on the Please wait screen, it seems that the laptop is that connects something, but not really do anything.

  However if I had to start the computer in safe mode with network it works fine.

  Any ideas?

  I really need some help here.

  Kind regards

  JT

  Hello

  Have you noticed the problem even if the laptop is not connected to the network and if you want to load your user profile on Windows 7?

  If this isn't the case, then I guess that it has something to do with the network, and in this case, I recommend asking the network administrator for a few suggestions.

• VMware View 4 - PCoIP - scanning is very slow

  When you scan from a USB scanner from a heavy client without VDI, it takes 7 seconds. When you use VMware View with PCoIP 4.0, it takes 52 seconds.

  Any suggestions?

  Rgds

  M

  I sent an email to teradici support and they checked the speed was closer to the USB 1.1 instead of 2.0.   If you PM me your email I'll send you the conversation

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Satellite P300D-13 has (PSPDCE) - downgrade to Windows XP SP2 from Prof. - pilot

  Hello, first of all, I come from Germany and I hope you understand my problem...

  I bought last week it really useful for computer laptop Satellite P300D-13 (PSPDCE) and have now a few huge problems...

  I have download all the drivers of P300D Series for Windows XP and also installed the display driver.
  My problem is that the sound is not as good as on Vista. He did not get the right sound for me... Is this a driver problem? But I can listen to the sound...

  Another problem is that Windows XP found SM Bus controller, but cannot find a driver for it.

  I know it was a big mistake not to burn a DVD of VISTA recovery but I have all the files for recovery on a separate disk DVD. If I have the Toshiba recovery software can I make a DVD of recovery with the old files of Vista on Windows XP? If all goes well, there is a solution...

  I don't like Vista, it's like a very expansive toy for me. So I decided to install Windows XP Prof. SP2...

  I hope someone can help me...

  Regarding the noise I suggest you to check the website of conexant for some newer drivers, maybe they could improve the 'sound quality' of your audio output.

  The SM-Bus is part of the ATI chipset and install it that you only have to google for "ATI SMBus" that returns thousands of links to driver ATI SM - Bus.
  With the recovery it s not so easy because the file structure on the recovery partition is not similar to the image of final recovery on the recovery CD.

  I suggest to make a picture of your XP, recover your machine with the recovery of HARD drive, burning media, and then copy the picture from your previous installation of XP on the C: drive. I know it sounds a bit like much work but it s worth. :)

  Welcome them

• Satellite P300D-110 integrated webcam does not work properly.

  Hi all

  as the title suggests, the webcam built-in in my Toshiba Satellite P300D-110 does not work correctly. Allow me to explain. Using the camera Assistance software I can take pictures and record music. If I try to record a video preview screen comes black and the end result on black, pitch black aswell tuns.

  Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or on community websites, using Firefox, Internet Explorer or Safari the app crashes.

  * How what happened? *

  You tell me. That's how it happened;
  * 1st day: I booted up my laptop and looked at my installation fresh and clean Windows vista Home premium. I tried my webcam using the webcam support software and it worked like a charm.
  * Day 2: once I start my laptop and try to start my webcam only to find out that he is no longer functions.
  To give a quick summary of the thread;

  Help of camera Assistance software provided by Toshiba, can I take pictures.
  Help of camera Assistance software provided by Toshiba, I can record the sound.
  Using camera Assistance software provided by Toshiba I can _ * NOT * _ save or preview of a video.
  * I can't start my camera using any other application such as, but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
  * I downloaded and isntalled the latest drivers on the Toshiba site.
  Portable listen is on a weekday.

  I'm not sure what more I can do, all I want is for the webcam works, if someone can help me please do.
  And if possible WITHOUT having to reinstall Windows Vista Home Premium.
  I have not yet used and would not do as a solution to all the problems that might occur in the future.

  Sincerely,

  a sad customer.

  Camera Assistance software using provided by Toshiba I can't save or preview of a video.
  Can you please describe the steps how you try to do this? I have to ask you this question because it works fine on my laptop. When the recording is finished Player opens and you can see saved the film. This is the avi format and at the top of this player, you can see the path where the film is recorded.

  Strangest thing for me, is that you can not use it with Skype. OK for MSN is not perfect, but there is absolutely no problem with Skype. Make sure the settings and it should work somehow.

• Satellite P300D - 12L: Enter key did not work in games like FIFA, NFS

  Hi all!

  I own a laptop Tshiba Satellite P300D - 12 L.
  In the last month, I got Win XP 32-bit installed and it became a strange problem: the Enter key did not work in games like FIFA, NFS, but in others, and in the office, it worked normal applications.

  A few days ago, I installed Win 7 64 bit and now I have the same problem.

  Recently I went to my local Toshiba service and they told me, about this problem, it's a software issue, so I changed my OS.

  Anyone know what I can do to solve my problem?

  Thank you

  Hello

  You mean the Enter key works in common applications such as Internet Explorer, Windows Explorer, or some editors correctly?
  Only these few games are troubled?

  Hmm that's strange
  You use the latest version of the BIOS?
  If this isn't the case, then update it!
  You can find the latest version of the BIOS on the European driver Toshiba page

• Satellite P300D - touchpad does not work

  I have a Satellite P300D-131 with Windows 7 64 bit. The touchpad does not work.

  Activation with Fn + F9 has no effect. The device manager says that the device is functioning.
  Who knows the reason? Could be a driver problem.

  Where can I get a driver appropriate? I already searched the Download Center of Toshiba software without success.

  On this virtual path, it is not easy to offer a diagnosis in order to answer your question may be some speculation on the possible reasons.

  In your ad, it is not clear since when you have this problem.

  I installed Win7 64 bit on several laptops P300 and everything was ok.
  Since when you have this problem? I can't imagine touchpad doesn't work all the time since when you use Win7.

  It is interesting that I ve seen that Windows update offers updates of the driver Synaptics listed as optional update. Perhaps you have it installed?

  Did you install driver touchpad of Toshiba download page? If Yes, have you tried to remove it and test the features?

  Does touchpad work in safe mode?
  Open the properties of the mouse and check if peripheral is enabled/disabled?

• Satellite P300D - screen flickers and the battery is unstable

  I bought the new Satellite P300d-h-13, I liked a lot, but from the first day I have problems with it.

  1. when on battery, the screen flickers - it will clear less brilliant, just like I'm shaking the laptop (I'm not :))
  2. battery is not stable: when I use the battery indication of remaining time power is going from little or a lot, I mean for example on 90 percent, it says 59 minutes and on 60 it says 1 hour and something when he is on 50 say 30 minutes and when it is at 25 percent It says 25 minutes then to 23 per cent arrives at 17 minutes.
  I guess the problems are linked, but I don't know what to do. Contact service, or do I have to install any software?

  3. a third problem is a small white spot on the screen - it's about a pixel or at most 5 pxls and it is too bright. I guess that's a dead pixel (s) but I am not happy when a new laptop has this problem (s)

  So if anyone can give me some advice I would appreciate it a lot.
  Thank you in advance.

  Hello Hio

  Do you always use factory settings or you have installed your own operating system?
  Have you noticed the number one and two on the first day?

  What about dead pixel? I know it's not nice, but I wonder you didn't react immediately after the first or second day and try to talk with your dealer and ask for replacement. Please check follow documents on dead pixel:
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  Good bye

• Satellite P300D-15O - display drivers does not-XP/Vista

  Hi all

  After buying this Satellite P300D-15O tried several times the reinstallation of operating systems: Windows XP Pro, Windows Vista x 32 and x 64 version, but does not display drivers offered by Toshiba downloads: it runs only the Windows standard vga drivers after you have installed and not working drivers for AMD/ATI HD3470.

  Max resolution is 1152 x 864. The laptop has been pre-installed with Vista Home Premium and good work and resolution of 1440 x 900 ATI drivers; but I want a new installation on my own without any addition of pre-installed software from McAfee/Google etc - The Toshiba telephone Customer Service can't help for this problem, they have NO answer, :(! Is there a solution with the inf files? Can anyone help!

  THX, endo

  Hello

  In my opinion, make you a huge mistake. Laptop with factory settings is perfect set up and all hardware components are working properly. OK, I understand you don't want to use some additional preinstalled software, but you must understand that you don't have to do it.

  I have absolutely the same option about it than you and the first thing I did with my Satellite P200D is to remove all the software, I don't want to have installed on the system.

  You can do the same thing. Go to the control panel > programs and features and then remove all the additional software. Later, install your favorite software and be happy with it.
  I do the same thing. Why install OS Vista own especially if you ve already paid for a Vista license.

  What do you think of this?

• Satellite P300D can't find (WXP) Wireless Lan Adapter

  Hello world

  you just bought a Satellite P300D. First thing I did was to remove Vista to have a power more available for my work and not for the operating system.

  I found most of the drivers on the Toshiba site, BUT the wire gives me problems.
  I tried all available WLan drivers,-without success.

  Intel driver does not appear in Device Manager.

  This message is displayed:
  "Intel (r) PROSet/Wireless Software was unable to detect a supported wireless card. Please install a supported card"

  How can I install such "adapter"?

  Thank you

  Hello

  Usually, when someone buy newest model laptop first what needs to be done is creating recovery DVDs.
  I just hope that you have done this. If this isn't the case, you can tell Vista so you will buy a day if you want to have Vista on this laptop you buy recovery DVDs.

  Anyway, there are several different platforms for Satellite P300D then please send us the exact model number.
  If we can check the specs and see what wireless network card is inside. So you can download the correct driver WLAN.

  Just for example: I Satellite P200D and inside is Realtek WLAN card.

• Satellite P300D - wireless connection problems

  Good evening.

  Sorry for my bad English.

  Here's my problem: whenever I try to install my wireless modem, my computer shuts down, the blue screen before connecting off the coast with many words that I did not have time to read.

  The modem is certainly not a problem, as I tried it on another PC and it works perfectly fine.
  Can you help me?

  Hello

  If I understand correctly your problem; the BSOD (blue screen of death) appears during the installation of the software for the external Wlan modem immediately.
  Right?

  I assume you are using portable satellite P300D Win 7 on your computer.
  There may be a compatibility problem with Win 7 OS?

  > The modem is certainly not a problem, as I tried it on another PC and it works perfectly fine.
  Have you tested the modem with the other Win 7 computer?

  The other hand the Mobile supports an internal Wlan card.
  Have you tried an update of the Wlan card driver?
  To do this
  Here you will find the latest drivers:
  http://APS2.toshiba-tro.de/WLAN/

• How to connect my Satellite P300D on TV?

  My computer is a Toshiba Satellite P300D, and I connect to my TV via HDMI, because there are 2 HDMI input ports.
  So do the types of cable should I buy to connect HDMI? Do I have to download any software? What about the audio?

  See you soon

  Visit the electronic store and buy high quality HDMI cable. Talk to your local dealer and pick up information which one they have.
  To connect your laptop to the TV is simply.
  Connect the two devices with HDMI cable, HDMI on TV channel selection and use FN + F5 to switch to the TV.
  Everything should be OK.

  Please let us know if there is a problem.

• Satellite P300D - 21K - problem Hibernate / sleep

  Toshiba Satellite P300D - 21K was pre installed with Vista Home edition, but no more.

  It has Win 7 64 bit blank installed RAM was fun to the maximum and there is no additional software that was installed on the PC yet just the OS package is.

  I put the PC in 'sleep' by FN + F3 or simply close the lid and it works very well. When I take by opening the cover, he wakes up in fine. I begin to exploit where I left who works until it completely freezes and the only way to solve the problem is in the power and turn it on again and restart Windows. This always happens when I use the sleep function.

  When I got this PC runs smoothly so this seems to be a software problem.

  Copied files have been archived.

  > When I passed this PC runs smoothly, so this seems like a software problem.
  Hmm I do not know if its software issue related m
  It could be linked to the new RAM installed since data will be written into the RAM going in standby mode.

  Recommended to remove the RAM module installed to test the laptop mode and sleep.

• Satellite P300D-13N and Installation of XP problems (Sata driver)

  Hello

  I have some problems with my XP Downgrade.
  I tried to integrate the Intel Storage Manager driver in my XP CD, but unfortunately it did not work.
  Probably because I've been incorporating all THE drivers, who were available, not only who should work for my chipset.
  Anyway, in one of the threads of this forum, there is a link to [THIS how-to | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] and I think I found my problem...

  [Here: http://s5.directupload.net/images/080904/2eptrpzs.jpg] is a screenshot of my (sorry to make it in German) Device Manager preinstalled Vista.
  As you can see, there is no information about the Version of controller.

  So my question is, WHAT chipset is built into my laptop, because it is due to the fact that Intel drivers do not work AND there is no information on any Intel-inverter speed, I have no idea, I have to integrate into the XP CD to get my XP Installation working drivers. :(

  Help :(

  Thank you

  Laptop: Satellite P300D-13N PSPDCE

  Hello

  According to the specifications of the laptop, your laptop has an AMD RX780M chipset. Processor is AMD Turion Dual Core RM - 70 (2.0 GHz).

  I hope this info will help you.

  Good bye

• Satellite P300D - 15 c is very slow to start WMI

  Hello

  My pc (Satellite P300D - 15 c) is very slow at startup.
  When I look in the newspaper, there is a WMI wich tooks 2 minutes East service delivered with an error.

  After that, my pc on the screen fr jumps 'welcom' starts normally.

  So I turn the WMI service, but that there are other mistakes after the full boot (tosipcsrv.exe close).

  Is there another type of solution, except turn the WMI service?

  Sorry for my bad English,
  If you can answer me in Dutch or English basic ;-)
  With sincere friendships.

  Johan Nijsse

  Here's the (Dutch) log of the WMI problem:

  Logboeknaam: Application
  Bron: Microsoft-Windows-WMI
  Reference: 2009-04-06 22:52:53
  Gebeurtenis-id: 10
  Taakcategorie: Geen
  Level: who cares
  Trefwoorden: Klassiek
  Gebruiker: Derby
  Computer: PC_Fam_Nijsse
  Description:
  Gebeurtenisfilter met query SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99 kan niet worden van naamruimte //./root/CIMV2 vanwege opnieuw doing 0 x 80041003. Mogelijk worden er geen gebeurtenissen via said thing totdat het clean filter is corners.
  Gebeurtenis-XML:
  
  
  
  10
  0
  2
  0
  0
  0 x 80000000000000
  
  1961
  
  
  Application
  PC_Fam_Nijsse
  
  
  
  ./root/CIMV2
  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
  0 x 80041003
  
  

  Very good thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  It will be interesting for you.