VMware WebAccess does not

Similar Questions

• VMware Server2 does not not after reboot host (openSUSE11.0)

  I've recently switched to server2 on my openSUSE11.0. Now, I've noticed that after a reboot of the server host does not work (no entries in ifconfig on the NIC and webaccess does not work)

  Only when I run vmware - config.pl again, he shows up.

  How can I change the settings that the server will be in place after the host is restarted, as was always the case with server1

  Thanks in advance.

  Richard

  This means that it should be run at startup, then try the setting in/etc/sysconfig/boot - I certainly it necessary on different hosts to openSUSE.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• 'VMware Workstation does not support the multiple monitors feature in other guests'

  When I click the icon "Cycle multiple monitors", I get the message "VMware Workstation does not support the multiple monitors feature in other guests."  Google found me no hits on it.  Anyone know what that means or how I could get multiple monitors to work?

  The host OS is Windows 7 Professional x 64 with service pack 1 applied.  The guest operating system is Debian Linux, version 8, also 64-bit.

  $ uname - a

  Linux debianvm 3.16.0 - 4-amd64 SMP 3.16.7 - ckt9-3 #1 ~ deb8u1 Debian (2015-04-24) x86_64 GNU/Linux

  The virtual machine was created with VirtualBox, then exported to a .ova file, then imported into VMware Workstation.  VMware Workstation is version 11.1.2 build-2780323.

  -Steve

  Hi Steve and welcome on VMware communities!

  With your virtual machine turned off the power, go into the settings of your virtual machine and on the Options tab, under general, select the client OS type: Linux > Debian 7 64-bit.  Then try to turn your virtual computer and see if it works.  (8 debian is quite close to Debian 7.)

  See you soon,.

  --

  Darius

• VMware.exe does not start

  Not sure when it happened,

  X 86 Win7 64, vmware 5 I think (vmware.exe is 14/08/2009-21:20)

  When I run vmware.exe (cmd line, nothing happens, no error, no messages.) He worked a few days ago. I can have installed a new drive, maybe asking a couple.

  Another app are ok, none of the exe under vmware seem to run. I tried to fix it, no luck.

  Google search (vmware.exe does not start), nothing obvious

  You don't know how to debug... y at - it track I can run?

  did you check your antivirus and firewall software?

  you have a process named webcam.exe or fixwebcam.exe running?

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Update Mac OS, now VMWare Fusion does not start

  I upgraded to Mac OS 10.4.11 on Intel MacBook Pro and now VMWare Fusion does not start.  I've since installed, uninstalled, and reinstalled to Fusion 2.0.2.  That did not help

  I have attached the logs from VMWare. Any suggestions?

  John

  Hi John,.

  I checked your logs - thank you for them!  That you use in an accident in one of the Apple libraries (OpenSSL, to be precise), which uses VMware Fusion.

  I see a number of Mac OS X 10.4.11 users complain about the accident even in iTunes:

  http://discussions.Apple.com/thread.jspa?MessageID=8254606

  http://forums.Macworld.com/thread/105826

  They claim that the installation of the latest Apple security updates (they specifically mention 2008-007) solves the problem.

  Can you try to install the latest security updates, and let us know if this fixes the bug Apple?

  Thank you!

  Ben

• the inventory of VMware service does not start, the wrong function, bad sql server port

  I've migrated vcenter SQL database to a new server after this KB

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 7960893

  but now most of the vcenter services does not start cause of according to the inventory service.  I see service log of inventory which is the problem, it tries to connect to SQL Server by default, 1433 port, but my SQL server instance is listening on a different fixed port, I don't want to change.  Where can I configure the inventory service we another port of SQL Server?  According to a KB related to the above, it is possible to do

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2033516

  but unfortunately I have vcenter 6 and the instructions above do not seem to apply, I can't even find ssocli, the mentioned folder structure does not exist on my installation

  
  Thank you.

  I solved this.  Despite what has been reported in the newspaper the issue was not the port.  The new database is a named instance, the connection string for vcdb.properties, he entered as the server name = hostname\instancename in fact, it is necessary to use two slashes return hostname\\instancename :-/

• Compaction VMDK from VMware 11 does not work

  Hello
  I try VMware Workstation 11 before I used 10.04, so my host systems is 14.04 Ubuntu 64-bit and Windows 7 64-bit, so I install the new Version of VMware 11 on both systems and after I used the days of view I like to compact a witch Guest OS was a 14.10 Ubuntu 64-bit I user sudo dd if = \u003d/dev/zero of / 0 bit bs = # 20971520 bs = 20 m
  in the guest operating system free unused disk space, and then delete the file 0bits with sudo rm /0bits.
  powerd off power the virtual computer and go to Options / hard drive and use the Compact function after 5 seconds, it said the disk was compacted successfully, but when I look on the size always has been and will be 65GB so it does nothing!

  So I check a cuople of things to ensure that it is not not the file system itself (I mean the real hard disk bad sectors) but that's all is ok no case found and something else works very well.
  So I uninstall the 11 VMware and reinstall the Version 10.04 and compaction again this VMDK and after do with Vmware 10.04 size is only 3.6 GB so in my Point I think theres a problem with VMware 11.

  Can we reproduce here or got the same problems?

  Furthermore, I also try to compact the disk on the host Windows 7 with VMware 11 and 10 and this is the same problem vmware 11 dose does not but vmware 10 compact very well.

  Here are some data on the system I'm working on:

  AMD 4 x 3.6 GHz

  8 GB Ram

  hard drives 2 1. 500 GB for systems

  and 2. 1 TB data/work disc the drive working is Formatet on NTFS.
  (I also try to reduce the VMDK on an Ext4 Partition and it doesn't!) Only with the VMware Version 10.04 it Compact always the VMDK)

  So in this case can you help me or tell me what im doing wrong?

  Greetz Anatol

  I had the same problem.

  My VMDK is also more and more everyday and can't be shrunk in VMware 11.

  I found a temporal solution.

  Executes command (my guest OS is ubuntu 14.04) below

  # "0" in all unused area filling

  Cat/dev/zero > filling

  Sync

  filling of RM

  # run vmware operating system tool, invited

  # in my case, it must be installed in/usr/bin /.

  # I have set location in my root "/", any region will be shrunk as much

  sudo disc vmware-toolbox-cmd shrinkonly /.

  He worked at my side.

  You can try this way temporally.

  Good luck

  Stanley

• VMware Tools does not update...

  Hello! I got this message when I tried to update my VMware Tools: "there was a problem updating a software component. Try again later and if the problem persists, contact your system administrator or the VMware Support. "What can I do to fix this?

  To add to what Andrew said... Download and unzip the Tools-windows - 9.2.2.exe.tar on the host and then run the file tools-windows - 9.2.2.exe on the host.  He then silently retrieves and installs files windows.iso and windows.iso.sig to VMware players Working Directory.  Then just try to install VMware Tools normally by selecting install VMware Tools in the Virtual Machine menu.  If this does not work then you will need to manually assign the ISO Image to VMware Tools (windows.iso) on CD/DVD to the virtual computer and then install from in the guest operating system by running setup.exe from the CD/DVD drive.

• Updated to mountain lion VMWare Fusion3 does not

  OK, before anyone says that stupid, it was to be upgraded without checking compatibility please Don ' t bother. On the other hand, never knew a piece of software that does not allow you to upgrade even if such.

  Then spend useless wisdom, I'm stuck and would appreciate some advice.

  I upgraded to mountain lion, thinking that I can spend my VM directly afterwards. To my surprise, the VM Fusion icon has a no entry he sign with no option to upgrade. I need three of my virtual machines back to life, running VMware Fusion 3.1.

  I made a backup using my time machine, I don't like if I have to revert to my version of snow leopard OS just to the virtual machine working again or purchase an upgrade to Fusion 5. I don't know if one can bring back those VM.

  Please help, all my work is in those virtual machines.

  Thank you.

  > I have 3 VM created in Fusion 3.1, Ive upgraded my MAC to mountain lion (10.8.1), the upgrade of vmware will allow me to access my vm?

  The answer is Yes, but make sure you stop the virtual machine properly. (Do not force stop) As woody said, you can back up the virtual machine and give it a try on the trail of 30 days.

  > I updated to Fusion 5 because that's the only option I see available or what I need to improve some how to 4.1.3?

  Upgrade to Fusion 5 is preferred. With 49.99 to Profression 5 Fusion Fusion 3 standard is a good deal. If you switch to Fusion 4, you pay once to upgrade in the future. Why not use the latest version of the software directly with the same amount of money?

• VMware ESXi does not support the RAID on HP Proliant ML110 G5 drives

  Hello

  I installed VMware ESXi on my HP Proliant ML110 G5. I got 3 hard drives on my server at the moment, one of them is VMware ESXi and other two are RAID1.
  Whenever I connect to my server via vSphere client I have the chance to see every HARD drive (datastore) separately.  Is it possible that VMware does not RAID installation?
  I would need to see these two hard drives as a data store. Do you have any ideas on how I can do?
  Thank you.

  like any other typical server, you need to configure the sata raid controller RAID5/RAID0. but keep in mind that this controller without any battery backed cache would have very horrible performance. Another way is that you can use datastore span to provide as a large store of data, but if you lose all of the computer, you will lose all data.

• VMware tools does not run after installation

  Hi all

  After installing the VMware tools, my mouse still does not go smoothly as before installing, I rechecked service runs, I don't need to hold ctr + alt to move comments to the host, or vice versa, I did uninstall and reinstall.

  Am I missing something here?

  Thanks in advance

  Hello

  What operating system do you use?

  If 2008 checkbox.

  http://www.datadr.NET/index.php?option=com_content&task=view&ID=74&Itemid=35

  Frank

• VMware server does not recognize my cpu

  Hello.

  I installed debian squeeze on an IBM x 3650 M2 wth a quad core xeon E5504

  I use 2.6.32 - 3-vserver-686-bigmem in kernel and if I cat/proc/cpuinfo I can see all 4 core.

  VMware server is correctly installed and now 2 virtual machine is running, but I see in the web gui:

  Processors Intel Xeon E5504 processor @ 2.00GHz 1 CPU x 2 hearts

  any suggestions?

  Hello

  Yes, your server and the cpu are supported for ESX (i) 3.5 U4 and superior.

  In the VMWare compatibility guide, nothing is said about compatibility with vmware server 2.

  If you check the compatible processors in the guide to vmware server 2 , you'll see vmware server just supports until the Intel Xeon Quad Core 5300 series, not the new series 5400 or 5400. That's why vmware server 2 recognizes your Quad Core E5504 as Dual Core. Because it does not support your CPU.

  IMHO, if I were you, I'll try to use your server esxi 4.0 U1. It is a best product of vmware server virtualization and supports your CPU.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• VI customer reports VMware Tools 'does not work '.

  Hello people,

  It becomes very annoying. He started to arrive since I upgrade ESX server with U2, U3 and Vcenter Server of U3 U4.

  The problem is: from time to time, VI client, the State of the VMware Tools on different virtual machines (distributed on both ESX hosts) indicates "does not work". Can I open a session on the VMS, restart the VMware Tools service, then VI Client displays "ok". I wonder what causes this problem and ready to solve this problem.

  I apprecaite your help.

  Thank you.

  Have you seen this post from Jason Boche?

  Systems Administrator & virtualization architect

  http://technodrone.blogspot.com

• VMware ESX does not recognize the local RAID volume

  Hi all

  We are running VMware ESX 3.5 Update 3 on a G4 HP Proliant DL 380 with a Raid Smart Array 6i controller (this is our test platform).

  Since the VI Client, it is not possible to add a data store that corresponds to a local 200 GB Raid5 volume.  I can see this disc in the "Storage adapters" section (path: vmhba0:1:0, LUN ID = 0).

  We have updated the firmware on our server is no problem of conformity between VMware ESX and such old material?

  Thank you very much in advance for your help

  Connect directly to the server and try to create this VMFS volume?  I noticed on VC 2.5 that whenever I have create a server and try that he does not see the space when I try to add storage.

  Direct connection to the host ESX with the VI Client works every time...

• VMWare Workstation does not work after successful installation

  Hello world

  I installed VMWare Workstation 6.0.5 on Win XP SP3 with success, but the program itself does not start, I get no error messages, just nothing happens. Nothing in the logs of the system either.

  When I tried to run the program in Mode safe mode, it worked!... (obviously impossible to start a computer V, but Workstation started very well)

  any ideas?

  Thank you

  Hello

  I think I just found the reason... and a deaf mute.

  I have installed many programs of news lately for the WebCam and connect it to my DirectTV DVR.  So I did not understand that the wrong software belongs to but think it is the WebCam install stuff that belongs to Live Messenger.

  Anywho, the process that prevents any software vmWare installation or execution was "FixCamera.exe".

  Once I have debug more I will update this list.

  It's by chance luck that I found that I was killing various thought process that it could be linked to the virus filters.

  Kind regards

  David