VMware, Windows XP, network access

Similar Questions

• In Windows 8 network access protection

  How can I activate on the network access Protection in Windows 8?

  Driley25,

  I understand that you must enable the network access protection feature in windows 8.

  Steps below:

  1. on the screen type Windows apps services.

  2. on the right, click settings

  3. on the left side, click local services.

  4. the PC will put you on the generic desktop and you will see the box.

  5. on the right to scroll down, the ads are in alphabetical order so just head to section N and should see.

  Please answer as soon as possible.

  Thank you

• Windows 8 network access protection is turned off

  I used a driver for an old Lexmark printer from them through driver whiz and it stop my normal startup and doesn't allow me to install a new HP printer. Help!

  HI Margaret,.

  The cause of the issue can be if the Netlogon service is disabled. I suggest you to follow the steps and check if that helps resolve the issue.

  Method 1: start the Network Access Protectionservice. Follow the steps to start the service.

  a. press the Windows key + R key.

  b. type services.msc and press ENTER.

  c. research of Access Protection network; do a right-click on the Service for the Protection of network access and click Start.

  Method 2: you can check the link to install a printer.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Method 3: you can check the link for the troubleshooting steps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please get back to us and let us know the status of the issue.

• Windows Home network access

  I installed Oracle Database Express Edition 11g Release 2 on my desktop. Works very well. I can access from http://127.0.0.1:8080 / apex.

  Is there a way I can access it through apex of the browser on that machine to other machines on my home network? Is it possible that I can refer to the local IP address in the URL from another machine and access the pages of the Apex?

  127.0.0.1 is the address of 'closure '.  Consider "internal IP address.

  So that computer B must Access a computer, you must use the external address of the computer.

  For home networks, this is usually 192.168.0.x or 192.168.1.x

  You will need to track down what's the IP address of your server to the APEX.

  Then, you can use it (until the DHCP renew it at a different IP address)

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder

• Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security

  In the diary of my application event log errors, I have many of these MSSHA ID 1027 events, get Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security.    I understand what its about, but have no idea how or what to do about it.  Help!

  http://TechNet.Microsoft.com/en-us/library/cc735442 (v = WS.10) .aspx? ppud = 4

  According to this site, no user action is required.

  I don't know why you receive this error message, but apparently is not a problem.

  http://msdn.Microsoft.com/en-us/library/dd565668 (v = VS. 85) .aspx

  the above site is a very detailed description of the error.

• What changes does Network Access Manager has to do in Windows to work properly?

  Our Network Access Manager in the Windows machines to work in cenario with ISE CISCO 802.1 x.  In some machines NAM does not work well. What features of Windows 7 is NAM module needs to interact with the operating system?

  Glad you were able to solve your problem and take the time to update (+ 5 from me). If your problem is completely resolved, you must mark the thread as "Answered" :)

• Windows 7 loses access to the network share when unplug wired connection

  With my laptop Windows 7 Pro (64-bit SP1;) docked and thus have wired network (within a domain), I can access shares network very well. A wireless connection is active at the same time. When I detach, Windows Explorer and Office applications get upset some of the time. In addition, this is the case when I anchor. He didn't there has no problem opening a file on the network share when I'm rooted or not anchored, but the transition is not well. Windows launches the error code 0 x 80070035, Windows cannot access , the network path was not found. When it is connected to our wireless network, the machine name is altered by an additional letter. The latter has led to a problem that had to be cleared up by a patch installed by my system administrator, but the problem persisted.

  I understand that Windows 7 should be smart enough to pass interfaces for network access, having a preference for a wiring if it is available (perhaps even the connection data rate). Maybe it's too much to expect that the operating system could make this transition, but it seemed that my Vista laptop has done very well. Any suggestions are welcome.
  
  Thank you.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in forum Windows 7 networking . You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Should I have the Network Access Protection Agent Service to start automatically on Windows 8?

  Hello!

  While I was looking for a completely different setting in Control Panel in Windows 8, I came across the center of the Action settings and noticed that the Agent of network access Protection service is not running. I open the computer management snap-in and noticed that the service is configured by default must be started manually. I looked for more information on the internet but I wasn't able to find a detailed explanation about his goal for a personal computer. The only explanation I found applied only to Windows Server.

  Is it really necessary to configure this service to start automatically on a home network, or can it be just left set to start manually? What is its use on Windows 8? Is this just in case the computer needs to access a network of business domain?

  I am running Windows 8 Pro 64-bit edition on an Acer Aspire 5552-5898 connected most of the time in my network domestic, although usually I connect to public networks. My computer is not configured to connect to a domain on a corporate network, not even using VPN. When I access my e-mail from this computer company account, I first need to authenticate with a code provided by RSA device before I can connect to Outlook (OWA).

  See you soon!

  Carlos

  Hi Cspork,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  As I understand it, in the center of the Action the officer of Access Protection settings network service does not work.

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer.

  The service can be left to be set to start manually.

  It is especially where the computer needs to access a network of business domain.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Error "no network access" on the devices not connected with hotspot Wi - Fi on Windows 8

  Original title: wifi hotspot problem not reciving data connected network - windows 8

  I have windows 8 simple ASP, when I do a WiFi hotspot it activate and connected to the iphone, lumia or tab, but the data are not recived by any device? they don't show error no network access? What is the problem?

  Hello Anwar,

  I wish to gather information to help you better:
  (1) where exactly you receive the error message "no network access? It's on the phone or the computer?
  (2) how do you have enabled connection with devices Wi - Fi hotspot?
  (3) you have problems connecting Wi - Fi hotspot on the computer?

  (4) you receive the same error message with all devices?

  If the issue is with Windows phone, post the same question in the forums Windows Phone for assistance. Check out the link:

  http://answers.Microsoft.com/en-us/WinPhone

  If you encounter this problem only with the computer, then respond with more information so that we could help you better.

  Answer us with more information that would help us resolve this problem more far.

• Property of local network access

  After installing SP2

  insufficient right SP2 to the ownership of network access

  Hello

  I put t see no problem why Windows XP with SP2 should t works on the Satellite Pro. The Microsoft SP2 includes a large number of bug fixes. In addition the SP2 installs a windows firewall that must be enabled on your device. But that innovation is compatible with all laptops from Toshiba. Like Quad please visit Microsoft site to find an SP2 information.

  PS: It would be great if you will write about your unit name and problems with your device.

  Good bye

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Windows disabled remote access to my wireless printer

  My printer is connected wireless to the computer at home (so a 'network', I guess).  But the recent problems led me to authorize remote technicians, and apparently, as collateral damage, my printer does not print now.  At one time gave a convenience store, I found a statement that "Windows has denied access to distance", but I can't find out how to restore remote access.  Printer is now installed, and the work and watch as the default printer, with options for "start printing immediately.

  Anyone know how to force Windows to restore remote access to my computer to the printer?

  Thanks in advance

  Rich

  Hi rich,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Uninstall and reinstall the network drivers.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  For reference: printer in Windows problems

• Computer Windows 7 cannot access the files on computer Vista but Vista is started the last. Both lasted upgrades of the operating system.

  Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, nothing works. Cable network Ehternet WORKGROUP. Windows 7 computer can access files through their prorgrams course that Thunderbird (save the attachment without problems) or previously network drive is available. Just Windows Explorer does not see the computer. As soon as I restart the Vista computer, it is visible in Windows Explorer. It's the computer Vista is a central workstation with others and inspires other users that connect at different times of the day that the central computer must be restarted for full access. XP-based computers do not have a problem and can access the files at any time. It is the only computer of Vita.

  Hello

  Follow these steps and check if that helps:

  (a) open centre network and sharing by clicking the Start button, clicking Control Panel, clicking Network and Internet, click Network and sharing Center.

  (b) click on the arrow next to public folder sharing, and then click one of the following options:

  i. turn on sharing so anyone with network access can open files

  II. turn on sharing so anyone with network access can open, change and create files

  III. turn off sharing (people logged on to this computer can still access this folder)

  (c) click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  You can also read this article and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

• want to 4500: HP envy 4500 network access

  At first, I don't know what I'm doing or talk, so please when replying keep things simple! :-)

  I want to HP wireless 4500 printer, which is great, but I can't use it wireless with a usb key. I did all the instructions for setting up (this is my second attempt on this laptop because it just came back to be fixed and I had to re - install the printer again) I did troubleshooting, doctor scan etc, all said the printer is connected and works fine, but the wireless connect it is use is not wireless my laptop is turned on. So to make the printer work wireless I disconnect my connection wireless internet (which means I can't access or print all documents saved in the cloud) Confussed? Yes, me too!

  I could always use the printer very well if I'm at the office with usb, but I have a laptop so that I don't need to be sitting in my office, all the time! My daughter would also like to print stuff without having to email them to me first.

  Any suggestions how to fix it please?

  Hi @my-hp-printer,

  Thanks for posting in the Forums of HP.

  I want to help you with questions you have set up your HP Envy 4500 eAll-in-one for wireless printing.

  You mentioned that the printer wireless is different from the wireless that uses your computer. You have more than one router? This can complicate matters when you try to configure the wireless printer.

  You will need to know your network name (SSID) and your wireless password in order to connect the printer to the network that you use on your laptop.

  If you don't know what this is, you can download the HP Print and Scan doctor.

  To retrieve your network information using this tool, download and run the file, and then follow these steps:

  • At the top of the window, select network.
  • In the drop-down list, select Show Advanced Info.
  • Then select view wireless info
  • Your network name and password will be displayed in the box at the bottom of this window.

  Once you have your network information, you must run the Setup on your printer wireless Assistant.

  1. in the home of the printer screen, press the wireless icon (to the right of the screen)

  2. Select settings at the bottom of the screen

  3. use the arrows to select Wireless Setup Wizard, and then press OK

  4. a list of available networks will appear. Select the network to which your computer is connected, and then press OK

  5. it will then prompt you the network password, use the top and down arrows to navigate the keyboard and press OK to select each letter or number. NOTE: The password is case-sensitive. You can use the button on the lower left corner of the screen to change the keyboard uppercase, lowercase and numbers.

  Once the printer is connected to the network, run the CD of the software provided with your HP printer again. It prompts you to install a new printer.

  If the printer is not seen wireless software try to do a reset of network.

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  I would like to know if this solution works for you!

  Have a great Friday.