VMware Workstation failed to mount the physical disk 10TB
VMware workstation or any other product vmware does support more than 2 TB of physical disks?
I am trying to connect a 5 of 10 TB raid enclosure and mount it on my ubuntu vmware workstation machine. The common error that I receive is when mounting the reader on ubuntu and I think it might have something to do with the size of the file.
I am running vmware workstation 12 in windows 10.
The disk is taken offline in windows and I'm under WS as an administrator.
Error | VMDK CONTENT | DiskPart Info |
---|---|---|
Operation failed on the file "\\.\PhysicalDrive1". If the file is located on a remote file system, make sure that the network connection and the server on which resides this disk to work correctly. If the file is saved on a removable medium, link media. Select Retry to retry the operation. Click Cancel to end this session. Select continue to pass the error to the guest operating system. I/o error, dev sdb, sector 11721553632 I/o error, dev sdb, sector 11721552128 I/o error detected. File system stop Please unmount the file system and to rectify the problem (s) metadata I/O error: block 0x2baa8b100 ("xlog_bwrite") error 5 numblks 8200 can not read the superblock | # Disk DescriptorFile version = 1 Encoding = "windows-1252". CID = 6f4a8bb1 parentCID = ffffffff isNativeSnapshot = 'no '. createType = "fullDevice." # Description of the measure RW 23441768448 DISH '\\.\PhysicalDrive1' 0 partitionUUID \\?\scsi#disk & ven_h #w & prod_raid5 #5 & 19bb575e & 0 & 010000 #{53f56307-b6bf-11d0-94f2-00a0c91efb8b} # The database disk #DDB ddb.adapterType = "free". ddb.geometry.biosCylinders = "1024". ddb.geometry.biosHeads = "255". |
ddb.geometry.biosSectors = "63".
DDB. Geometry.Cylinders = "16383.
DDB. Geometry.Heads = "16".
DDB. Geometry.sectors = "63".
ddb.longContentID = "55c8f3052c372c02465d66656f4a8bb1".
DDB. UUID = "60 00 C2 97 8 a 7 c c2 cb - 9 a 27 51 78 58 a7 e6 3f"
ddb.virtualHWVersion = "12".
H/W RAID5
Disc ID: 00000000
Type: SATA
Status: Offline (policy)
Path: 1
Target: 0
LUN ID: 0
Path: PCIROOT (0) #PCI (1C07) #PCI (0000) #ATA (C01T00L00)
Current read-only State: No.
Read-only: No.
Boot disk: No.
Disk swap file: No.
Disk hibernation file: No.
Crash dump disk: No.
Cluster disk: No.
The official version said that WS allows only virtual up to 8 TB of disk.
According to my own tests, it only limits the size of the VMDK for 'New - VM' Assistant.
Once you have a greater vmdk - just tried a vmdk 10TB - WS won't complain about the size.
I don't expect that WS will prevent the physical disks to use inside a virtual machine that is already configured.
So in your case I think you started WS with a normal user account.
Try to start as administrator WS - maybe even using the administrator account.
I think that then it will work.
Unfortunately, the error messages produced by vmware.exe are not really accurate-, so there is no way to know if you really have a bad super block.
To test if this is really the problem and not just an error message - poor try to mount the drive directly.
Please post the vmdk - want to know if there is something unusual about 5.5 TB in the disk.
Tags: VMware
Similar Questions
-
VMware workstation tray icon starts the Notepad?
Whenever VMware Workstation 11 runs in the background and I double click on the icon my computer - Notepad opens instead of VWware workstation on the host. The same thing happens if I right click and select "Open VMware Workstation. This was happening before you install version 11. I was hoping that the new version/installation might solve the problem.
Since the installation of version 11 - I tried to uninstall and reinstall the application. I also tried to uninstall, run the application to install with the option "/ clean" and then reinstalling with reboot between each. I also tried the suite "The clean after an incomplete installation on a Windows Welcome guide" all with the same effect.
Any ideas? Other then not being able to open VMware Workstation via the everything tray icon works great.
System:
Windows Pro 8.1, 64-bit
Dual Intel processors Xeon E5-2650 v2 - 32 hearts
Dual NVIDIA Quadro K4000
64 GB RAM DDR3
Disk 512 GB SSD - RAID 0 system
24 TB SAS - RAID 10
After digging through many areas I final found the resolution to this problem. The question which was the file extension. VMX was assigned to Notepad. A quick reallocation in the 'Default settings programs' window and everything is fine.
-
'VMware Workstation does not support the multiple monitors feature in other guests'
When I click the icon "Cycle multiple monitors", I get the message "VMware Workstation does not support the multiple monitors feature in other guests." Google found me no hits on it. Anyone know what that means or how I could get multiple monitors to work?
The host OS is Windows 7 Professional x 64 with service pack 1 applied. The guest operating system is Debian Linux, version 8, also 64-bit.
$ uname - a
Linux debianvm 3.16.0 - 4-amd64 SMP 3.16.7 - ckt9-3 #1 ~ deb8u1 Debian (2015-04-24) x86_64 GNU/Linux
The virtual machine was created with VirtualBox, then exported to a .ova file, then imported into VMware Workstation. VMware Workstation is version 11.1.2 build-2780323.
-Steve
Hi Steve and welcome on VMware communities!
With your virtual machine turned off the power, go into the settings of your virtual machine and on the Options tab, under general, select the client OS type: Linux > Debian 7 64-bit. Then try to turn your virtual computer and see if it works. (8 debian is quite close to Debian 7.)
See you soon,.
--
Darius
-
Script to create the folder on the physical disk and not in the package
Hello-
Attached is a script that I have which will create a folder on the C:\ inside the bubble. What I need, it's so he can create a folder on the physical disk and not inside the bubble. Can someone tell me what I did wrong here? I have a similar script which creates a folder on the D drive for the linked clones and it works fine. Thanks in advance!
Change the isolation mode of the file %drive_C%\vaforms5 'Merged' into the Attributes.ini, rebuild the ThinApp and check.
With the help of isolation have merged, the application can read/write file on the physical machine.
-
Any Installation of Vmware Workstation failed in my machine, why? See the details
Hey guys, I'm trying to install vmware workstation 11,10 even though 9, but unfortunately it shows this kind of error every time.
then I try to install from appdata/local/temp, but it shows the error of capture4... I tried many things to fix this... but I failed...
So guys help me please install... sorely lacking...
is my laptop config: core i5 - 3230M, ram - 4 GB os-win7 64 bit sp1...
need help please...
Welcome to the community,
the problem is probably caused by the apostrophe in the name of the folder of the user. Try at each logon with a different user (temporary) account, or change the temp/tmp environment variable to point to a different directory (existing), for example, "C:\TEMP".
André
-
VMware-mount has the ability to mount the dynamic disk?
I understand that there are 2 types of VMDK / disks: basic and dynamic. I would like to know if vmware-mount exe has the ability to set up dynamic disks? If so, how?
I tried to use the command vmware-mount as:
" X: vmware-mount ' [storage1 | ] http://communities.VMware.com/community-document-picker.jspa?communityID= & subject = storage1 "[ ] VMDKName.vmdk ' /h:IPAddress u:UserName /s:Password i:DataCenterName/vm/VMName
but he did not succeed. It gives the following error, even if no one is using the VMDk nor is the machien powered:
"Unable to mount the virtual drive. The disk can be used by a virtual machine, may not have enough volumes or mounted under a different drive letter. If not, check that the file is a valid virtual disk file. ».
Any help is appreciated.
Thank you
Matton
VMware-mount current does not support dynamic disks.
Thank you
Annick
-
Dear community,
I'm new to VMware Workstation, but progressed in computer science.
At first, I want to give you a brief introduction of my system and my goal.
HP ProBook 6550 b (System with Intel Core i5 processor Intel-based)
The HARD drive access mode: S - ATA AHCI
Operating systems: Windows 7, Ubuntu 12.04 x 86, Ubuntu 12.04 x 64
Boot Manager: GRUB2
VMware Workstation (trial period) to 9.01 Linux x 86
Goal: install MS Windows XP Professional with physical disk access several partitions on the hard drive local
The installation of VMware Workstation 9.01 on my system Ubuntu 12.04 x 86 worked perfectly, without any error. Large.
I was able to set up and run a Windows XP VM standard by creating a new virtual disk , following the Nice Wizard.
It was just to test, but just after I tried to configure the same OS as a virtual machine using a physical disk (for advanced users) to directly access a local hard drive.
Also, I selected "BusLogic (recommended)" on the choice of type of I/O controller.
As a device, I chose the HARD internal laptop drive and used two individual partitions (the real partitions on my HARD drive I wanted access within the virtual machine).
These partitions have been preformatted with NTFS (and not have been mounted in my Ubuntu).
However, I was not sure if Windows XP has been will be installed on one of these partitions.
The turn on/off the virtual machine to install the OS, I got the message following (msg1):
"You are using a SCSI drive. Performance of dual-boot SCSI physical drives are poor. The installed operating system could not start correctly in the virtual machine. However, the physical SCSI disks work normally so exclusively in the virtual machine. »
Just after the message following (msg2):
"If you dual-boot a native Windows installation, problems can occur when attempting to start your system in VMware Workstation." For more information, see "http://vmware.com/info?id=128". "
Click OK to continue, Cancel to power off.And finally this (msg3):
«An error has occurred causing a virtual CPU go into the stop State.» If this anomaly had occurred outside of a virtual machine, it would have caused the physical machine restart. The stop State are accessible by properly configuring the virtual machine, a bug in the guest operating system or a problem in VMware Workstation.
Click OK to restart the virtual machine or Cancel to turn off the virtual machine. »I cannot explain the last error message and don't know what to do.
After specifying msg2, I found information about possible problems in dual-boot environments, caused by different drivers for the IDE controller.
So I tried to change the access mode to S - ATA AHCI HARD drive to S - ATA IDE in the BIOS to solve the problem.
Unfortunately, I have had no success on this operation, because the error message appeared again, once I restarted the VM.
Sorry, but I have no idea what goes wrong.
In fact, I don't know what VMware workstation wants to do, when you install the system on a disc/physical partition to have direct access to the local hard disk.
Because I don't see even the first screen of Windows Setup, there must be something wrong.
Underlying product system issues and if it's a primary or logical partition?
Need a complete unformated HDD?
Only selected partitions are accessible within the virtual machine?
Is the system installed itself on the selected partitions?
Maybe some experienced users can help.
Your help is welcome!
Thank you.
stanni
First I use a raw disk to install Windows XP from a virtual machine, but if I had an existing installation, I would add the partition as a raw to be executed with a VM disk.
Here's what I'd do... Install Windows XP to a normal file based virtual machine, and then add a second disk as a raw disk with the partitions you want to join. That's assuming that you really need not where what to start Windows XP natively and the physical partitions that access are used for data. Also if need be add the raw disk as IDE.
-
VMWare Workstation fail to restart after suspend
I'm using VMWare Workstation 7.1.1 build 282343 on a laptop Windows 7 Ultimate x 64 (8 GB). I run my VMS machines from a disk external eSata. My VMs are all Windows Server 2008 x 64. When I finished work I suspend the virtual machine, stop VMWare Workstation, then disconnect the eSata drive. It is, whenever I just restarted the VM, I get a message that is not possible to restore and I give myself the opportunity to "get rid" or retry - retry fails, so I have to throw. It's embarrassing because it then takes a boot for a long time the virtual machine from scratch.
Any ideas how to solve this problem?
disable USB-support for this virtual machine and start again
-
VMware Player (VMware Workstation?) Interfere with the connection of the browser
I installed VMware Player (or so I think) on Vista Home Premium 32 - bit SP2. Here's what the Properties tab - & gt; Details shows for "C:\Program VMware Player\vmplayer.exe:
Description of the file: VMware Player
Type: Application
File version: 6.5.4.11892
Product name: VMware Workstation
Product version: 6.5.4.11892
Copyright: (c) 1998-2010 VMware, Inc..
Size: 3.06 MB
Updated: March 31, 2010 23:31
Language: English (United States)I looked for this in order to make the version of the
-what?-VMware Player or VMware Workstation I, and in order to find the right users Guide or manual.But this isn't my problem entirely.
My problem is that I was using my HTTP (browser) client and it has been noticed that I could not connect to certain websites (e.g., http://www.gnu.org/). I can do that at home, through my wireless router (configured for IP) static on the local network. Then I go to work where I use the ethernet connection (not getting any IP by DHCP!... configured for a static IP address on the WAN). I call tech info, that says they can connect. I think it's because I'm using OpenDNS instead of the name of University servers, and then I enter the "Network Sharing Center' and see 'several networks' and THREE Local (ethernet) connections.
After that think "WTF?" and think that 2 local connections and 3 are screwing things up, I disable all local connections and re-enable the connection with the hardware ethernet card. Who has NOT solved the problem of my failed to connect to the web site, that is
http://grub4dos.sourceforge.NET/
The service
http://GSiteCrawler.com/tools/server-status.aspx
reports the HTTP 200 response code very quickly. I use this service to see if the info tech group workplace blocks a web site.
However, I want to learn more about virtual network maps created by the VMware Player (desktop?). I ran the "vmnetcfg.exe" interface and in the Summary tab, see:
Virtual network
Subnet
DHCP
VMnet0 (bridged)
255.255.255.255
VMnet1 (host only)
192.168.136.0
Activated
VMnet8 (NAT)
192.168.219.0
Activated
The guide I want to read should explain what are these local ethernet adapters and they can interfere with the operation of the host outside of the virtual machine.
Thank you
Welcome to the forums!
The guide: http://pubs.vmware.com/ws7_ace26/ws_user/ws_net.html#989125
Where is your problem to browse occur? In comments or host?
VMnet0 is the virtual bridged network. He connected the virtual NETWORK adapter of your guests who are bridge transparently to your physical network device.
VMnet1 is the network invited only, a virtual, where the host and the guests are members of. You see a VMnet1 NIC on the host, because it's the virtual card that the host uses to connect to VMnet1.
VMnet8 is the NAT network. It connects to each stack TCP/IP Protocol on the host computer. Therefore the guest may use any communication device that uses TCP/IP. Th egust is hidden behind the NAT device. This means that all packets leaving the host, coming from the prompt appear to come from the host. VMnet8 virtual card is one that connects to the host on VMnet8 virtual network to enable external communication for the customer.
AWo
VCP 3 & 4
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
-
My host is a processor Intel Core i5 (active VT) and 8 GB of RAM Windows 7 64 bit running with hardware virtualization enabled.
Apart from McAfee Antivirus and the usual Windows updates, no other software has been installed on the host machine.
I am running Vmware Workstation 6.5 and I installed 3 popular VM with below guest OS, s/w and memory:
VMware ESX 4-2 GB
Server 2003 (DC and DNS) - 1 GBServer 2003 (vCenter Server) - 1 GB
However, it is not possible for me to all 3 virtual machines run simultaneously. If I turn on Vmware ESX 4 and try to start Windows 2003 VM, it displays the following message:Not enough physical memory is available to power on this virtual machine with its configured settings.
To resolve this problem, set the parameters in additional memory to allow for more virtual memory machine to swap.
If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.
Can you get it someone please let me know where are the rest of the memory is busy? Size of total memory of 3 virtual machines are only 4 GB and I have to be able to run all the VMs set 3, but in this case I can't even run two virtual machines simultaneously.
Please help what should I do?
With 8 GB of RAM on the host allowing why only 1 GB to be reserved for all you run virtual machines?
-
logfile member indicates in the database, but not on the physical disk, no match
I just created a standby db via rman string active database of the target, and it worked.
However when I published an alter System switch logfile, it doesn't have anything going on the side of Eve.
I checked the alerts log, at the start of the db in waiting, there following error:
Errors in the /u01/app/oracle/diag/rdbms/prd/prdS1/trace/prdS1_ora_16397.trc file:
ORA-00313: open failed for the members of the Group of newspapers wire 13 2
ORA-00312: threads of 13 2 online newspaper: "+ PRD_DAT/prd/onlinelog/group_13.390.786640667".
ORA-17503: ksfdopn:2 could not open the file +PRD_DAT/prd/onlinelog/group_13.390.786640667
ORA-15173: entry 'group_13.390.786640667' does not exist in the directory "onlinelog".
Completed: alter group clear database logfile 13
change the group database logfile clear 14
Erasing online newspaper wire 14 2 sequence number 0
Errors in the /u01/app/oracle/diag/rdbms/prd/prdS1/trace/prdS1_ora_16397.trc file:
ORA-00313: open failed for the newspaper wire 14 2 group members
ORA-00312: threads of 14 2 online newspaper: "+ PRD_DAT/prd/onlinelog/group_14.366.786640667".
ORA-17503: ksfdopn:2 could not open the file +PRD_DAT/prd/onlinelog/group_14.366.786640667
ORA-15173: entry 'group_14.366.786640667' does not exist in the directory "onlinelog".
Errors in the /u01/app/oracle/diag/rdbms/prd/prdS1/trace/prdS1_ora_16397.trc file:
ORA-00313: open failed for the newspaper wire 14 2 group members
ORA-00312: threads of 14 2 online newspaper: "+ PRD_DAT/prd/onlinelog/group_14.366.786640667".
ORA-17503: ksfdopn:2 could not open the file +PRD_DAT/prd/onlinelog/group_14.366.786640667
ORA-15173: entry 'group_14.366.786640667' does not exist in the directory "onlinelog".
Completed: alter group clear database logfile 14
RFS connections are allowed
Sat Jun 30 21:03:50 2012
change the flashback of the database on
Errors in the /u01/app/oracle/diag/rdbms/prd/prdS1/trace/prdS1_ora_18097.trc file:
ORA-38706: cannot enable the logging of FLASHBACK DATABASE.
ORA-38788: more recovery pending database is needed
ORA-38706 marked during: alter database flashback on...
Logfile members SQL results are this:
MEMBERS
--------------------------------------------------------------------------------
+PRD_DAT/PRDS/onlinelog/group_2.262.787354885
+PRD_DAT/PRDS/onlinelog/group_1.290.787354885
+PRD_DAT/PRDS/onlinelog/group_5.260.787354889
+PRD_DAT/PRDS/onlinelog/group_3.261.787354887
+PRD_DAT/PRDS/onlinelog/group_4.264.787354887
+PRD_DAT/PRDS/onlinelog/group_6.279.787354889
+PRD_DAT/PRDS/onlinelog/group_7.277.787354889
+PRD_DAT/PRDS/onlinelog/group_8.280.787354891
+PRD_DAT/PRDS/onlinelog/group_9.281.787354891
+PRD_DAT/PRDS/onlinelog/group_10.282.787354893
+PRD_DAT/PRDS/onlinelog/group_11.287.787354893
MEMBERS
--------------------------------------------------------------------------------
+PRD_DAT/PRDS/onlinelog/group_12.265.787354893
+PRD_DAT/PRDS/onlinelog/group_13.266.787354895
+PRD_DAT/PRDS/onlinelog/group_14.283.787354895
+PRD_FRA/PRDS/onlinelog/group_1.1285.787354885
+PRD_FRA/PRDS/onlinelog/group_2.1286.787354885
+PRD_FRA/PRDS/onlinelog/group_3.1287.787354887
+PRD_FRA/PRDS/onlinelog/group_4.1288.787354887
+PRD_FRA/PRDS/onlinelog/group_5.1289.787354889
+PRD_FRA/PRDS/onlinelog/group_6.1290.787354889
+PRD_FRA/PRDS/onlinelog/group_7.1291.787354891
+PRD_FRA/PRDS/onlinelog/group_8.1292.787354891
MEMBERS
--------------------------------------------------------------------------------
+PRD_FRA/PRDS/onlinelog/group_9.1293.787354891
+PRD_FRA/PRDS/onlinelog/group_10.1294.787354893
+PRD_FRA/PRDS/onlinelog/group_11.1295.787354893
+PRD_FRA/PRDS/onlinelog/group_12.1296.787354895
+PRD_FRA/PRDS/onlinelog/group_13.1297.787354895
+PRD_FRA/PRDS/onlinelog/group_14.1298.787354895
28 selected lines.
asmcmd displays the log files:
Name of type Redund time scratched Sys
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_1.290.787354885
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_10.282.787354893
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_11.287.787354893
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_12.265.787354893
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_13.266.787354895
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_14.283.787354895
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_2.262.787354885
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_3.261.787354887
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_4.264.787354887
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_5.260.787354889
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_6.279.787354889
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_7.277.787354889
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_8.280.787354891
ONLINELOG COARSE 30 June at 21:00 UNPROT Y group_9.281.787354891
ASMCMD > output
How to make to solve this problem, the physical standby db seem does not.
Thanks in advance for the help.Hello;
Error 16047 July 2, 2012 21:52:15 PING [ARC2]: Heartbeat failed to connect on the eve "of pressure relief devices. Error I have
s 16047.You have a common mistake. If your main I; m log_archive_dest_n think and the DB_UNIQUE_NAME FRO the night before do not match.
The DB_UNIQUE_NAME specified for the destination does not match the DB_UNIQUE_NAME destination.
Make sure that the DB_UNIQUE_NAME specified in the LOG_ARCHIVE_DEST_n parameter defined for the destination matches the DB_UNIQUE_NAME parameter set to destination.
OK Cancel apply, restart mount on fixed spfile, verify the results.
Best regards
mseberg
-
Add the physical disk to SBS 2008 VM
Hello everyone
I installed VMWare ESXi server on my PC and then I created a Vitrual Machine (VM) by installing MS Small Business Server 2008.
I want to use it as a main server and I want to attach additional physical contain hard drives that contain currently downloads and applications so that I can share them on the network of the virtual SBS2008 machine.
I read around a bit on how to add hard drives to a VM machine. From my understanding, it seems that I can give direct access to the VM (SBS, 2008) on the discs, but they need to be formatted in the virtual machine format (vmdk).
Is it possible for me to add or my NTFS hard disks on the computer virtual card without losing any existing data they hold somehow?
Thank you
Frank.
You can only do this if you have disks that are a SAN (iscsi or FC connectivity) solution. You can not simply to attach a physical disk to a virtual machine...
the only way you can make available these readers is to have a physical box with them connected and spread then readers...
-
Move the physical disk to another server ESXi
Hey guys,.
I copied a virtual computer to another physical disk on my ESXi server.
Is it possible to take the disk and move it physically
Another ESXi machine and see the data existing on the second ESXi store
Server?
We were doing the initial test on a test machine. Now I want to move the virtual machine to a server better
with a raid array. I know that I can use
SCP, but I prefer not bogged down my network file copy 100 gig.
When I physically move the disc I can see on the second
machine. But I don't know how to add it in
storage. When I use the wizard, I get a
WARNING: it will wipe the data.
Thank you
Should be possible, but you may need to activate volume resignaturing on ESXi in so he could see the new drive. Search the VMware KB for "will esx" and you should be able to find an article that explains how to...
-
Why vmware workstation does not mask the cpuid SYSCALL/SYSRET little?
I am running VMware workstation 11.1.3 on linux. In my client operating system 64-bit, I notice that cpuid for eax = 0 x 8000001 returns a value edx masks who has always little 11. It's the bit SYSCALL/SYSRET ability.
Here is the part of the vmware.log file shows the parameters of my hostCPUID:
2016 02-03 T 15: 59:19.629 - 08:00 | VMX | I120: hostCPUID level 80000001, 0: 0x00000000 0x00000000 0 x 00000021 0x2c100800
As you can see, edx is 0x2c100800, which means that my system is capable of SYSCALL/SYSRET.
I tried to add the following to my vmx file:
monitor_control.enable_fullcpuid = 'TRUE '.
CPUID.80000001.EDX = '-:-:-:-:-: 1 -: -: - ".
Unfortunately, even with these settings, my diary of vmware shows no entry in the section 'Differences CPUID of hostCPUID' to cpuid.80000001.
As a test, I tried to change bit 10 instead of 11 to cpuid.80000001.edx bits and the difference that presented themselves. So what is the 11 bit characteristic, and why is he always have hidden inside the virtual machine no matter what I do?
Thank you.
You check what code 64-bit or 32-bit code in compatibility mode? Mode 32 bits (legacy and compatibility), only AMD processors set this bit.
-
Application of VMWare Workstation and comments using the multicast
Hello
I am currently evaluating VMware Workstation (version 10.0.0 build-1295980)
Host operating system version is Windows Server 2008 R2 Enterprise Edition 64 bit 6.1.7601, SP1
Guest operating system is Windows 7 PRO
In the guest OS, I try to run an application that uses multicast (group address 224.64.16.1) communication
This translates into a fall VM, with the following log (excerpt)
2014 02-04 T 17: 20:17.253 + 01:00 | vCPU-5 | I120: CoreDump: ei-> size 69033984: len = 69033984
2014 02-04 T 17: 20:17.253 + 01:00 | vCPU-5 | I120: Backtrace:
2014 02-04 T 17: 20:17.253 + 01:00 | vCPU-5 | I120: backtrace [00] frame IP params 0 0x4285b01 0 0xfaa4546 opus_repacketizer_destroy 0x13f80ef2e 0x0faaed18 + 0x4b9ce [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x0004df2e]
2014 02-04 T 17: 20:17.253 + 01:00 | vCPU-5 | I120: backtrace [01] framework 0x0faaf640 IP 0x13f7e91a0 0x13fe6cae0 0x13ff88708 params 0 x 725 0x253cf47 opus_repacketizer_destroy + 0x25c40 [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x000281a0]
2014 02-04 T 17: 20:17.253 + 01:00 | vCPU-5 | I120: backtrace [02] framework 0x0faaf900 IP 0x13fb83934 params 0x2a 0 x 100000000 0 0x2e opus_repacketizer_destroy + 0x3c03d4 [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x003c2934]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: backtrace [03] framework 0x0faaf960 IP 0x13f9f134e 0x14023c3b0 0x13f97aa71 params 0 x 416100 0x3f6bc70 opus_repacketizer_destroy + 0x22ddee [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x0023034e]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: backtrace [04] framework 0x0faaf9a0 IP 0x13f9f310c params 0x14023c3b0 0 x 100000000 0xfaaf9e0 0 opus_repacketizer_destroy + 0x22fbac [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x0023210c]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: backtrace [05] framework 0x0faaf9d0 IP 0x13fd62742 params 0x3c0 0x37b0000 0 x 5 0xa34303132 opus_repacketizer_destroy + 0x59f1e2 [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x005a1742]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: backtrace [06] framework 0x0faafa20 IP 0x13fd9db2e params 0 x 38000000 0x3c0 0 opus_repacketizer_destroy 0 + 0x5da5ce [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x005dcb2e]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: backtrace [07] framework 0x0faafb90 IP 0x13fd62a0c 0x13fee9910 0x13feb619c params 0 x 8 0x14041b908 opus_repacketizer_destroy + 0x59f4ac [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x005a1a0c]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: backtrace [08] frame IP 0x13f97b056 params 0 0x0faafbf0 0 0 0 opus_repacketizer_destroy + 0x1b7af6 [C:\Program Files (x 86) \VMware\VMware Player\x64\vmware-vmx.exe base 0x13f7c0000 0x0001: 0x001ba056]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: backtrace [09] frame IP 0x76be652d params 0 0x0faafbf8 0 0 0 BaseThreadInitThunk + 0x000d [C:\Windows\system32\kernel32.dll base 0x76bd0000 0x0001: 0x0001552d]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: backtrace [10] frame IP 0x76d1c541 params 0 0x0faafc28 0 0 0 RtlUserThreadStart + 0 x 0021 [C:\Windows\SYSTEM32\ntdll.dll base 0x76cf0000 0x0001: 0x0002b541]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: Msg_Post: error
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: fatal error [msg.log.error.unrecoverable] VMware Workstation: (vcpu-5)
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120 + NOT_IMPLEMENTED d:/build/ob/bora-1295980/bora/devices/e1000/e1000Hosted.c:1829
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: [msg.panic.haveLog], a log file is available in "D:\VM\HGH2\vmware.log".
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: [msg.panic.requestSupport.withoutLog] you can ask support.
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: [msg.panic.requestSupport.vmSupport.windowsOrLinux]
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120 + to collect data to be submitted to VMware support, choose "Collect load data" in the Help menu.
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120 + you can also run the script 'vm-support' in the folder my computer directly.
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: [msg.panic.response] we will respond on the basis of your entitlement to support.
2014 02-04 T 17: 20:17.269 + 01:00 | vCPU-5 | I120: ----------------------------------------
2014 02-04 T 17: 21:52.008 + 01:00 | vCPU-5 | I120: output
Seems to have access to a resource NOT_IMPLEMENTED?
Someone observe similar problems?
Tips are welcome.
Best regards
-Pascal
After a further review of the pb crash was due to the configuration of jumbo packets. Should be disabled with the current use of VMWare Workstation.
Maybe you are looking for
-
Hotmail account for multiple users won't work. Cannot open any message. Load Web site very well.
-
My Toshiba Satellite L675D - S7042 Webcam and the microphone does not work
Help, please Moved to windows
-
"NIC not installed correctly.
Original title: latest updates When my pc loaded recent updates, I couldn't go on the internet I got the message "network card not installed properly 'download a new driver was the answer. of course I couldn't do that with no internet so I restored t
-
Connection Internet fails at time intervals
The unusable network connection minutes apart. My network topology is: my PC connects to a router via the wireless network, and the router connects to the internet using PPPoE. The detail is pretty weird, and I have no idea to solve it. When this pro
-
I just bought my BB Bold 9900 last Friday (January 6) and my provider is MTS. I have problems with my phone. But first, let me say that I am a TIME BlackBerry user FIRST and I could do something wrong or I didn't have the correct settings. But I'd ap