VMware workstation vm not listed, after migration

Similar Questions

• VMWare Workstation does not work after successful installation

  Hello world

  I installed VMWare Workstation 6.0.5 on Win XP SP3 with success, but the program itself does not start, I get no error messages, just nothing happens. Nothing in the logs of the system either.

  When I tried to run the program in Mode safe mode, it worked!... (obviously impossible to start a computer V, but Workstation started very well)

  any ideas?

  Thank you

  Hello

  I think I just found the reason... and a deaf mute.

  I have installed many programs of news lately for the WebCam and connect it to my DirectTV DVR.  So I did not understand that the wrong software belongs to but think it is the WebCam install stuff that belongs to Live Messenger.

  Anywho, the process that prevents any software vmWare installation or execution was "FixCamera.exe".

  Once I have debug more I will update this list.

  It's by chance luck that I found that I was killing various thought process that it could be linked to the virus filters.

  Kind regards

  David

• 'VMware Workstation does not support the multiple monitors feature in other guests'

  When I click the icon "Cycle multiple monitors", I get the message "VMware Workstation does not support the multiple monitors feature in other guests."  Google found me no hits on it.  Anyone know what that means or how I could get multiple monitors to work?

  The host OS is Windows 7 Professional x 64 with service pack 1 applied.  The guest operating system is Debian Linux, version 8, also 64-bit.

  $ uname - a

  Linux debianvm 3.16.0 - 4-amd64 SMP 3.16.7 - ckt9-3 #1 ~ deb8u1 Debian (2015-04-24) x86_64 GNU/Linux

  The virtual machine was created with VirtualBox, then exported to a .ova file, then imported into VMware Workstation.  VMware Workstation is version 11.1.2 build-2780323.

  -Steve

  Hi Steve and welcome on VMware communities!

  With your virtual machine turned off the power, go into the settings of your virtual machine and on the Options tab, under general, select the client OS type: Linux > Debian 7 64-bit.  Then try to turn your virtual computer and see if it works.  (8 debian is quite close to Debian 7.)

  See you soon,.

  --

  Darius

• VMware Workstation 10 - not enough physical memory...

  So, I'm aware of the Windows KB2995388 8.1 update that causes this problem:

  Not enough physical memory is available to power on this virtual machine with its configured settings. To solve this problem, decrease the size of the memory of this virtual machine at 460 MB, increase the amount of physical memory for all the virtual machines to 3296 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap. It is possible that native and/or services applications have locked memory which could help launch the virtual machine. Close unnecessary applications or services can free up enough memory to start this virtual machine. If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

  but after upgrading my OS today I have the same symptoms and can't find installed KB2995388.

  I tried running VMware Workstation as an administrator with no luck either.

  Y at - it no alternative workaround, or is there an another Windows update that can cause this problem?

  Thanks for any help and advice.

  Yes, other updates can cause the same issue, because the change that was made in KB2995388 was incorporated in to many other more recent updates as well.

  What version of Workstation do you run?  If you run Workstation 10.0.4 or newer on Windows 8.1, this should no longer be a problem.

  --

  Darius

• Files created in vmware workstation is not visible by the other OS

  After much research, I am in a bind. I use vmware workstation 7 with xp on a host of win7. When files are created within the virtual machine I can see them on the host of win7, but not on other computers in a network (OS x and ubuntu).

  Thanks much for any help.

  What types of files are they? Share permissions vs. ntfs permissions type

  of thing?

  On 12 February 2010, at 21:36, wesleyb82<>

• Update Windows 10 November (10586 aka 1511): bcdedit/set hypervisorlaunchtype off, but VMware Workstation does not start VMs with conflict of Hyper-V

  Hi all

  I upgraded from Windows 10 Windows 10 November updated this morning.

  I have the Hyper-V role is installed and use it from time to time, but bcdedit to configure the boot loader to disable Hyper-V by hypervisorlaunchtype power off.

  This technique has worked with 10 Windows and VMware Workstation and I could start and run virtual machines

  Since I did the upgrade, I can't start VM with this standard message "VMware Workstation and Hyper-V are not compatible"

  I am running VMware Workstation 10, but suspect that this problem also exists with later versions.

  Everyone knows about this problem?

  Someone at - he found a solution?

  I'm willing to fork over $150 for 12 workstations to solve this problem, but I want to know with certainty that it is circumventing my problem.

  Thanks for that.

  Uninstallation and reinstallation of the hyper-v feature, following the upgrade of Windows Windows 10 November 10 update solved the problem.

  I still need to run the following command to disable the Hyper-V technology

  bcdedit/set hypervisorlaunchtype

  Thanks to everyone for their help.

• VMWare Workstation does not stop is a virtual completely on Surface Pro 3 machine

  Hello

  I use VMWare Workstation 10.0.3 on my 3 Surface Pro I7 with 8 GB of memory. Most of the time when I suspend my virtual machine image he doesn't stop the virtual machine completely. The result is that I cannot supply or not more and even can't leave VMWare Workstation, because it says that the virtual machine is always busy. When I force to restart my computer and start VMWare Workstation virtual machine once again watch as suspended. What is good.

  This happens only on my Surface Pro 3

  Can anyone help?

  Best regards

  Evert

  Please this post in the forum of the workstation, it is now displayed at the forum of the workspace

• VMWare Workstation fail to restart after suspend

  I'm using VMWare Workstation 7.1.1 build 282343 on a laptop Windows 7 Ultimate x 64 (8 GB). I run my VMS machines from a disk external eSata. My VMs are all Windows Server 2008 x 64. When I finished work I suspend the virtual machine, stop VMWare Workstation, then disconnect the eSata drive. It is, whenever I just restarted the VM, I get a message that is not possible to restore and I give myself the opportunity to "get rid" or retry - retry fails, so I have to throw. It's embarrassing because it then takes a boot for a long time the virtual machine from scratch.

  Any ideas how to solve this problem?

  disable USB-support for this virtual machine and start again

• VMware Workstation 7 not able to install in Windows 2003 Service Pack 2

  Hello gurus,

  Could you please help me how to install vmware Workstation 7 Server in Windows 2003 Service pack 2.

  Set up the file does not start... It's window closes immediately.

  Thanks for your help

  Kind regards

  DK

  work here on 2 k 3 - sp2 - read http://sanbarrow.com/workstation-faq.html#setup

  Perhaps one of the tips to help

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Why vmware workstation does not mask the cpuid SYSCALL/SYSRET little?

  I am running VMware workstation 11.1.3 on linux.  In my client operating system 64-bit, I notice that cpuid for eax = 0 x 8000001 returns a value edx masks who has always little 11.  It's the bit SYSCALL/SYSRET ability.

  Here is the part of the vmware.log file shows the parameters of my hostCPUID:

  2016 02-03 T 15: 59:19.629 - 08:00 | VMX | I120: hostCPUID level 80000001, 0: 0x00000000 0x00000000 0 x 00000021 0x2c100800

  As you can see, edx is 0x2c100800, which means that my system is capable of SYSCALL/SYSRET.

  I tried to add the following to my vmx file:

  monitor_control.enable_fullcpuid = 'TRUE '.

  CPUID.80000001.EDX = '-:-:-:-:-: 1 -: -: - ".

  Unfortunately, even with these settings, my diary of vmware shows no entry in the section 'Differences CPUID of hostCPUID' to cpuid.80000001.

  As a test, I tried to change bit 10 instead of 11 to cpuid.80000001.edx bits and the difference that presented themselves.  So what is the 11 bit characteristic, and why is he always have hidden inside the virtual machine no matter what I do?

  Thank you.

  You check what code 64-bit or 32-bit code in compatibility mode?  Mode 32 bits (legacy and compatibility), only AMD processors set this bit.

• Remote SSH to ESX 4.1 (running in VMWare Workstation) is not possible

  I installed VMware Workstation 7.1 (latest) on Debian 5 (64-bit).  In which I installed ESX 4.1

  I followed the article to allow ROOT access on the server SSH (to ESX) http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 8375637

  However, when I try to access the SSH server on the ESX Server from a remote system (for example my workstation that is on the same network) I get

  "Error (connection refused) network.

  Any ideas on that?

  Dirk

  To allow anyone to use the "Promiscuous" mode:

  # chmod 777  /dev/vmnet*
  # cd /lib/udev/devices
  # mknod vmnet0 c 119 0
  # mknod vmnet1 c 119 1
  # mknod vmnet8 c 119 8
  # chmod 777 vmnet*
  

• Scheduler quartz 1.6 does not work after migration application Java of 10g and 11g

  I used the Task Scheduler quartz 1.6 with Java application built in technology from 10g to Oracle using Jdeveloper 10 g as IDE.

  The application works fine with the mentioned technology. But after the migration of the application of technology 11g quartz scheduler does not work anymore. The Weblogic Server allows you to deploy this technology migrated is Weblogic server 10.3

  Finally, the issue is resolved.

  The problem is resolved after you delete the following jar files in my view-controller project: Api .jar-Trinity and the Trinity - impl.jar

• VMware tools does not run after installation

  Hi all

  After installing the VMware tools, my mouse still does not go smoothly as before installing, I rechecked service runs, I don't need to hold ctr + alt to move comments to the host, or vice versa, I did uninstall and reinstall.

  Am I missing something here?

  Thanks in advance

  Hello

  What operating system do you use?

  If 2008 checkbox.

  http://www.datadr.NET/index.php?option=com_content&task=view&ID=74&Itemid=35

  Frank

• VM not Boot After Migration to ESXi v4

  I migrated to a new server ESXi v4 recently all my Hyper-v VMS using converter. On 8 virtual machines that I had converted 2 of them does not start and have the same problem. When they turn on, they show the screen of the POST from VMWare and then sit to a blank screen with a blinking cursor. Anyone seen this before?

  Some additional facts:

  -The 2 that aren't startup are both of the Windows Server 2003 R2 virtual machines. All other servers who worked were Windows Server 2008.

  -Do a repair with FIXMBR and FIXBOOT has not worked while I checked that all data are available in the Recovery Console boot from the DVD.

  -Going through all the stages of KB1006296 did not work.

  -Removing and adding the virtual disks has not helped.

  -J' I look for threads where many people see problems of this kind but not with any help.

  For any help or suggestion would be greatly appreciated.

  Thank you

  Chris

  With standalone converter, you have two buttons at the top... Convert the Machine and computer configuration.  Convert Machine made what he says, starts a process of conversion, but configure Machine runs the configuration process (the same thing that happens in the last 5% of the conversion process) to make compatible with current customer to run in a virtual environment (i.e. changes the speed control for everything that you have specified and installs the drivers and the entries in the registry so that good drivers charge etc...)

  So, you might be able to get away with just the race through a reconfigure virtual machine.

• SuSE 11.0: VMware process are not started after the system startup

  Hello

  Suddenly, I have the problem, that after restarting my computer (SuSE 11.0, 64-bit) host VMware and VMnet services are not started. After you run the command "/etc/init.d/vmware restart" everything is fine - until the next reboot. I don't have any idea what caused this. I also run /usr/bin/vmware-config.pl once again, but he has just helped until the next reboot.

  What can I do to get these VMware processes started automatically with the system startup, please?

  Best regards

  Chaoshacker

  Set:

  RUN_PARALLEL="no"
  

  in/etc/sysconfig/boot

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.