Voices of strength only call

Similar Questions

• Video support for voice gateway router can call?

  Hi all

  My gateway voice (Cisco 2921-V/K9) router to connect to the PSTN using SIP Trunk provider. CUCM 11 enter my ipphone and videoconferencing (SX20).

  If someone who using video-conferencing (SX20) to call my (SX20) videoconferencing via dial my number RTC, it only not Visual voice call of appeal.

  I have question: If the router voice gateway support video call?, if it can how to configure and there is an additional module?

  Thank you

  Cyriac

  Hi Cyriac,

  For a video call from point to point, you can see the "Configure the video telephony" section of the following link

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/Admin/9_1_1/CCMS...

  If video conferencing Setup check the following "feature Deprecation announces for video Conferencing and transcoding using PVDM3 on ISR G2 product Bulletin"

  http://www.Cisco.com/c/en/us/products/collateral/unified-communications/...

  Manish

• Voice mailbox for a call center?

  I am having some problems where for my call center messages go to the wrong mailbox. I don't know if we have this set up correctly. Any help would be appreciated.

  I have a Point of road SIC x 2288 (release of matches by the IPCC)

  I have two boxes of 2288 and 2287 unity voice mail.

  Now when someone calls technical support, they get the CSQ technical support or AutoAttendant CSQ (both are by the IPCC). When the appellant needs to leave a message, the call flow was designed to go to 2287, 2288 is a pointer of the unit until the Point of road of CTI. Can I have a voice mailbox configured to 2288 and remove the 2287 script? (A parameter, it is so easy to change). I'm not sure if change that will place the loop... call voicemail point to CTI road... that sends to the IPCC... to leave a voice message, they are transferred to 2288... who sends point routing CTI...

  How did he know to take a message, instead of to the front to CallManager?

  Is there an easier way or to create a mailbox for a call center?

  Normally, the voicemail box must be different from the CTI RP DN.

  So I think your configuration could be correct.

  If your CTI RP pointing to CRS is 2288, in the sript that you tap voicemail DN, if this would be the same, then you will need to make sure that the CTI port doesn't have access to CTI 2288 Point Road, to the parition assigned to CTI route point poinitng to VM. I would you recommend leaving the voicemail as 2287 box so that way you don't have to worry about the possible loop.

  What was your reason to change the voicemail box?

  Chris

• BlackBerry smartphones getting only call the newspapers in a 8530 message passing?

  I hate having my email in the message center so I removed it. The only other option is to add text that I already have a text message on the cover of the blackberry. So, how can I add my call logs? I don't know what else to add, in addition to that, if this is not possible. Thank you!

  Hi Njacksons94

  Thanks for your Post... !!

  Please select the green button and you will get all the newspapers call out there & now press Menu (sign of BB) > Option > Call logging

  Here, select all calls. Exit and save.

  Please cofnirm, if this work for you.

• BlackBerry Smartphones personal names in address book are not displayed when they only call the number they call from?

  My number is displayed only in the next issues of appeal.

  When someone I recorded in my book calls address their name used to display, now I get only the number they call from?

  Do I have to change a setting?

  Why the name sop appearing?

  He has a bee a few weeks now?

  I removed the battery and electric bike

  Don't check for updates... any help

  Went to a Verizon Center... no help!

  I can't thank you enough

  I went to the article and he's referring to this:

  It was caused by a bad security parameter, called content protection!

  I enclose the item for later use, it's a real miracle solution, you're very kind!

  Summary of the Causes

  This problem may be caused by one of the following:

• How will I know that I have a new voice mail or missed calls

  my iPhone 6 isn't letting me know that I have a new voice message

  Check the settings > Notifications > phone and see how you have configured notifications.

• Faded voice and echo on calls after the last update

  After the last update that was available from the 11 calls the volume of calls is now low on the end of receivers and they also get an echo in. I called the help line and they suggested that I run a repair I did reset my phone, but that still has not solved the problem. They'll call back me Monday to see if the repair worked.

  What happens if you turn off the microphone noise suppression?

• Selection of strength to call for listener table the ADF

  Hello

  JDev 11.1.2.4

  I wrote a custom listener selection I associate with my table of the adf.

  < af:table selectionListener = "#{pageFlowScope.rangePaging.singleSelectionListener}" >

  It is called as expected every time except when I click on a line that is already selected. For example, you have a table with 1 row, the row is selected by default after the initial rendering. Then you click on a link that is of type int row. The selection listener is supposed to be called, but it is not. I guess the selection listener is too smart, that he is not triggered because the line is already selected.

  Is there a way to force the listener to selection to be called even if the line is already selected?

  Thank you

  Hello

  I guess you need the selection of the event initially. to do this, remove the property selectedRowKeys, then by default no line will be selected.

  Kind regards

  Birame

• My name is Raymond Monson who is deaf cannot hear your voice now. Please call my phone [deleted kglad] with the video relay interpreter.

  Please call me [kglad deleted] now, I'm deaf

  You can ask your question here.

• Full button not only call the process of

  I have a process I created in workbench that worked.  Now when I click on the done button in the work area that looks like it works... the form disappears and takes you back to the screen of the process map.  However the process does not actually work.  With record on in workbench its nothing similar happens, you can call the process workbench, and it works fine however.

  What is happening on all the processes I have in the workspace.  Any ideas on a fix?  I restarted the jboss service already.

  I'm reasonably sure that your events are not processed.  But I expect a lot of Quartz/Planner/JobManager errors in the paper.  Check that your Scheduler service is running (use view components in Workbench).  If this is the case, then you can check if the events fired by creating a long-term process that uses the service of waiting and waits a few minutes before you continue.  Use the record and playback to see if it never gets past the stage of waiting service.

  If this is not as simple as that to restart the Scheduler, you will need to involve management and present your newspapers and all they ask for.

  Jon

• Incoming call to Smartphones blackBerry - unique ring only previously diverted to vmail

  Hello

  I'm having a problem with incoming calls: I get a ring (regardless of the type of ringing) in the normal profile before that the incoming call is diverted to vmail. The phone is not in silent/unavailable mode and started to vibrate/ring, low volume. My service provider is Vodafone, although I am currently in Toronto and homelessness with Rogers Wireless.

  Any help greatly appreciated

  FP

  Check the following-

  Dial: * 61 * [phone number] * 11 * [time] #.

  Instead of phone number of your voice mail box number (call your operator to find out who) and instead of putting any value, i.e. 5, 10, 15, 20, 25 or 30. These values are seconds, after which your calls will be diverted/forwarded to voicemail. Setting a higher value will respond to your request.

  This string is only applicable GSM carriers.

• Block a call with voice translation-rule

  I have the voice gateway Cisco connected to the PBX through E1 PRI. I want to disable all PBX users make direct calls to _some_ IP phones. I tried to do it with the voice translation rule. Part of my config is shown below. But this configuration does not work. Where a mistake?

  voice translation-rule 2

  rule 1 rejection / ^ 57 [12456789] [1345678].

  rule 2 rejection /^57[12456789]./

  rejection of rule 3 / ^ 57. [123456789].

  voice translation-profile NoDirect

  translate called 2

  Dial-peer voice voip 200

  call block-translation-profile entering NoDirect

  disconnect-cause invalid number incoming call block

  destination-model 5 [78]... T

  Setup progress_ind allow 3

  session target ipv4:10.1.2.246

  DTMF-relay h245 alphanumeric

  codec g711ulaw 80 bytes

  No vad

  Good to hear that it has been solved.

  Thank you

  Radhika.

• Telepresence, only audio calls

  When we use our SX and C series for audio calls the cameras come out of standby. Is there a setting to keep cameras in mode sleep for audio only calls?

  No - videoconferencing system distinguishes audio and video calls in which use of the camera, so when videoconferencing system wakes the device too. Remember, system of videoconferencing will not know what type of appeal, you're going to do until you actually make the call.

  However, you can configure the camera to remain in the position of privacy, or what position you want that he go on wakeup - see System_Settings/Eve/WakeUpAction - he always wake up well.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• iPhone6 placement random calls

  Started yesterday.

  Initially thought I inadvertently activated the iPhone which was in my pocket, but it happened today when the phone has been lying on my desk. iPhone appeals to chance.

  I think it is only call numbers that are on the list of contacts. Did a soft reboot, but it did not help.

  Any suggestions?

  Thank you

  It is a shot in the water, is the feature of "Hey Siri" able to make calls. I know that Hey Siri is suppose to work only wihen the iPhone being charged, but still it might pay to turn it off. Also disable the "voice control".

• Problems with sending sms and calls blackBerry Smartphones

  Hello

  I recently me a:

  BLACKBERRY 9300

  Smartphone (3G, WiFi)

  V5.0.0.977 (platform 6.3.0.63)

  Band 3G 1,2,5,6

  v3.8.5.85 cryptographic kernel

  version 1.0.91.633t of brand

  Configuration of micro Edition: CLD - 1.1

  Micro Edition profile: MID - 2.1

  Micro Edition JTWI version: 1.0

  Micro Edition Media version: 1.1

  Micro Edition PIM version: 1.0

  Micro Edition File version: 1.0

  Micro Edition bluetooth version: 1.1

  Micro Edition location version 1.0.1

  Micro edition security and trust services (APDU) version: 1.0

  WLAN version 4.1.1.30

  and I seem to have a unique problem.

  I'm on giffgaff (who has the phone accepts very well), but...

  1. I can only call a few people in my contact list. (at every time without problem) where others it disconnects right away when I try to call.

  2. I cannot sms only to individuals who have already sent me an sms, I can carry on a conversation but does not start with someone.

  3. some people I can txt I can't call and visa versa.

  I tried to make calls and txts in different places and times with the full signal strength. As I tried all the proposed problem fixed here. Yet, I still have the problem. I don't know if people have hurt to put a hand on me.

  any help with this would be much appreciated.

  sincere greetings

  Thanks for your detailed description, which helps us a lot. I recommend that you download blackberry protect and do a full backup. After the backup, please try reloading your software through blackberry desktop software or wipe a complete security. NOTE: all data will be lost during a wipe.