Volume and disk is missing: S

Similar Questions

• All Volumes and disks are dynamic Volumes

  Hello

  Recently, I tried to create a new volume on Disk Manager. When I finished, the disc became a dynamic disk. This disc contained the (C volume, volume of recovery Hp, Hp tools and system volumes.) I need help now. My computer still works because I have reformulated or something. My laptop is a HP Pavilion dv6 6134-tx. What shol I do? Here is a picture of the disk Managment.

  Yes.
  Try to save everything you do not want to lose first of all on an external drive. The factory image recovery is a destructive process. It will remove your current partitions and create a new simple volume partitions.

• Volume and network icons missing notifications

  Once more the volume and network icons that are normally on my left lower taskbar disappeared. How can I fix it? I'm not a Curmudgeon. Apparently, this has been a problem for years, and there are 100's of the posted solutions none of which I was able to implement. Microsoft allows just that kind of problem OS to continue for years?

  Normally, these icons are down right, not left.

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Read the tutorial above on how to solve your problem.

  See you soon. Mick Murphy - Microsoft partner

• My volume icon and control is missing

  My volume icon and control is missing and I also think that the program is now defunct.  A spokesman for AOL of sees has accessed our computer to 'clean up' to make it work better and I think that he has removed my volume and its program.  When I tried to add the volume on my computer icon, he told me I do not have the program and install it.  When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise."  In reading other posts, that it is said to right click on Start/Properties/Notification...but, I don't have the option "notification" under properties.  What should I do?

  My volume icon and control is missing and I think also the program is now defunct.  A spokesman for AOL of sees has accessed our computer to 'clean up' to run the best and I think that he has removed my volume and its program.  When I tried to add the volume on my computer icon, he told me I do not have the program and install it.  When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise."  In reading the other messages he said right-click on Start/Properties/Notification... .but I don't have the option "notification" under properties.  What should I do?

  Hello

  Notification options are only available for Windows Vista and higher. The Control of the Volume icon may appear from the Control Panel.

  You said that the Spokesman of AOL could have removed the Control of Volume, please make sure that the following files exist on your system to see if the Setting of the Volume has been either deleted or not
  %SystemRoot%\system32\sndvol32.exe
  
  
  If you do not want to enable the display of the Control of the Volume icon, please try the following
  [1] method: Using the control panel to change the settings for sounds and Audio devices
  • On the start menu, select Control Panel.
  • Double-click sounds and Audio devices.
  • On the general tab, check Place volume icon in the taskbar
  • Click OK

  Thank you
  Have a nice day :)

• missing volume and power battery icon

  icon missing battery volume and power for laptop under vista, I tried the fix he suggestion

  Hello

  Try Method 1 and if it is not available, try Method 3 in the link:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can also try a system restore to before that was the problem:

  «How to make a Vista system restore»

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you

  Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.

  Thank you

  LR is not a file Explorer. He knows only the disks that you imported photos of.

  If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.

  If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.

• Difference between ADVM Volume and filesystem ACFS ASM disk group

  Q1. What is the difference between an ASM disk group and a Volume of ADVM?

  In my opinion, an ASM disk group is actually a logical volume to the database (including the FRA files) files.

  11 GR 2 appears to have introduced the notions of volumes ADVM and filesystems ACFS.

  11 GR 2 ASM disk group can contain:

  • ASM disks
  • Volumes ADVM
  • Filesystems ACFS

  Q2. ADVM volumes appear to be dynamic volumes.

  However is it therefore not effectively overlaying a logical volume (the volume ADVM) under ASM disk group (conceptually a logical volume as well)?

  Even worse, if you left the ASM disk group redundancy in hardware RAID / SAN level (as recommended Oracle), you actually have 3 layers of logical disk? (ASM on top of ADVM on top of RAID/SAN)?

  Q3. If it is 2 layers of logical disk (i.e. on top of ADVM ASM), what makes this better than 2 layers using a 3rd party volume manager (for example the DSO at the top of the 3rd party LVM) - something Oracle encourages against?

  Q4. ACFS file systems, seem to be file systems clustered for not including ORACLE_HOMEs database files, application exe etc (but NOT GRID_HOME, OS root, OCR or voting records)

  Can you create / modify filesystems ACFS using ASM.

  The diagram of topology of oracle for ASM in ASM 11 GR 2 administration guide, says ACF in ASM. I'm not sure about that if ACFS belongs to ASM or ASM is located at the top of the ACF?

  Q5. Connected to the 4th quarter. There seems to be a number of different ways, ACFS file systems can be created? Which of this is the valid methods?

  • Thanks to ASM?
  • through native OS file system creation?
  • through OEM?
  • through acfsutil?

  my head explodes

  Any help and clarification appreciated

  Jim

  
  

  Q1 - volume ADVM is a type of special file created at the DG of the DSO.  Once created, it creates a block device on the BONE itself which can be used as any other block device.  http://docs.Oracle.com/CD/E16655_01/server.121/e17612/asmfilesystem.htm#OSTMG30000

  Q2 - the asm disk group is a group of disks, not really a logical volume.  It combines the attributes of both when it is used for purposes of database as the database and some other applications know how to talk about Protocol 'ASM '.  However, you won't find all the versatile applications that can do.  In addition, some clients prefer to deal directly with files and devices of volume systems which ADVM is forced to make.  In your thinking, you have 3 layers of logical disk, but each of them provides features and different attributes.  This is not a bad thing, though, as each has a slightly different purpose - os file system\device, specific database and storage-centric.

  Q3 - ADVM is specifically developed to extend the features of the DSO for use by General applications of BONE.  It includes the performance of database features and is tuned to work well in this situation.  Because it is developed in-house, it benefits from the design of ASM model.  In addition, rather than having to communicate with several vendors for support, your support is limited to calling Oracle, a single window.

  Q4 - you can create and modify filesystems ACFS by using command line tools and the ASMCA.  Creation and modification of logical volumes coming through SQL (ASM), asmcmd and ASMCA.  EM can also be used for the two elements.  ACFS is located at the top of the ADVM, which is a file in an ASM disk group.  ACFS is aware of the characteristics of the ASM\ADVM volumes and tunes it's IO make best use of these features.

  Q5 - several ways:

  1) connect to ASM with SQL, use 'alter diskgroup add volume' as Mihael points out.  This creates an ADVM volume.  Then, put in shape volume using the "mkfs" (* nix) or acfsformat (windows).

  (2) use ASMCA - a GUI to create volume and a file system.  Probably the easiest if your head is explosion.

  (3) use "asmcmd" to create a volume and 'mkfs' to put in shape file ACFS system.

  Here is information on the ASMCA, with examples:

  http://docs.Oracle.com/CD/E16655_01/server.121/e17612/asmca_acfs.htm#OSTMG94348

  Information about the command line tools, with examples:

  Basic steps to manage systems Oracle ACFS

• volume mixer icon is missing from my taskbar, can someone direct me as to how to get it back?

  original title: ideas: insert an error code or give a brief description of what you're trying to accomplish or difficult. __

  Hello, the volume mixer icon is missing from my taskbar, can someone direct me as to how to get it back?

  Hello

  Click with the right button on the taskbar, click Properties. Go to the notification tab and check again the line for the volume here icon.

  If it is not available, you may need to reinstall the drivers from your sound card or see the following page for an easy solution:http://www.winhelponline.com/blog/notification-area-icons-missing-in-vista/

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• lack of volume and the network icon?

  I can't find these icons. I recently did an update and can't seem to find it

  I have Windows Vista Home Premium Presario C700 Notebook PC

  Hello

  First, right-click on an empty area of the taskbar and select Properties.  Click on the tab 'Area of Notification' and enter a tick in the boxes next to Volume and network, then click apply and then click Ok to save this change.

  If you can't enter a tick as these boxes appear dimmed, follow the steps in the link below.

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-when-clock-volume-power-or-network-icons-are-missing-and-grayed-out-in-Windows-Vista/

  Kind regards

  DP - K

• Vista Shrink volume resulted in 75 lack space volume and 0 GB unallocated space. No possibility of partition. Lost space.

  I wanted to create a partition on a 150 GB internal hard drive. It is NOT the boot drive, it's the drive D. I got more than half the volume free and retractable Vista specific volume I could use up to 90 GB. I selected 75GB for the shrink.  After the SHRINK, it resulted in 75 lack volume and space 0 GB unallocated space for the partition. Volume shrinkage has returned an error and did not provide additional instructions. Unfortunately, I don't have the error message as I deleted it by mistake. It was a small error message in Shrink.

  VISTA 32-bit, updates to update... I just downloaded EASEUS Partition Master and it shows I have 150 GB of total space, unused and 0 free 90 not allocated. Looks like the problem doesn't show in the view "Properties..." (75 GB of total space, 15 GB free unused).  I don't know what the file system will be used to allocate new space. I think I'll try to copy a large file and see which uses the file system...

  When I look at the following:
  Computer management, storage,... disk management it says I have: Simple, Basic, disk 1, disk Local (d) 150 GB, NTFS, healthy (Primary Partition). (NO unallocated space appears on this menu)

  When I look at the properties of the D: drive:
  Local disk (d :)) 75 GB of capacity.

  I just lost 75 GB! Help...

  I don't know what happened. Shrink did not partition instructions... The space is lost forever?

  When you shrink a volume you create unallocated space which should appear in computer management - I don't know why it is not appear on your system.

  Maybe you can try to expand the volume to find the size of the original score (although it will wipe the data that is on the drive): http://www.howtogeek.com/howto/windows-vista/resize-a-partition-for-free-in-windows-vista/. (but I doubt it will work because there is no contiguous unallocated space appear).

  Here is another article on how to shrink and expland a partition under Vista.  Perhaps by reading the instructions for the narrowing, you will notice something did you not (or has done, but shouldn't have).  Otherwise, extend the partition could reclaim your lost space.  http://www.bleepingcomputer.com/tutorials/tutorial133.html.  Yet once again, because there is no unallocated space appear, I don't know if it will work (in fact, I don't think it will be).

  My best suggestion is to temporarily store the data on the disk also narrowed and then format the drive.  This should bring back to his full 150 GB and then you can try it again narrows (if you are still interested in this).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Pavilion 15 n011tu: indicators of Volume and brightness is not displayed

  Hello

  I lowered the score of 8 Win Win 7 (64) and since then the volume and screen brightness indicators did not show. The keys work properly. HP Support Assistant displays all the missing drivers. Any help?

  Hello

  Try to install the HP OSD utility at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52956.exe

  Kind regards

  DP - K

• I am unable to get my volume and power icons in the tray again.

  I try to get the use of the battery and the volume control in the notification area, I took the necessary steps to activate the icons, but they are gray and turned off so I'm not able to click on it and turn it on. What can I do to get them back in the region of notice... once again, I went to customize and click the icons of the Tower on or off and I couldn't because just the power and volume are grayed out and unable to move, and stuck in the closed position

  Hi Jodaro83,

  If one of the system icons is out, you can reactivate the as follows:

  Right-click on the taskbar and select Properties. This will bring up the tab "properties of menu taskbar and start.  From there, you can click on Customize button on the icons

  section. Look for the icon that you are missing, and check the status. The type of report should read "Hide icon and notifications", change that to "Show icon and notifications".

  If this does not resolve the issue most likely you have a problem with group policy on your machine. This can be corrected by following the instructions on the following link:

  http://www.mydigitallife.info/2009/01/01/fix-network-clock-volume-and-power-battery-system-icons-missing-with-disabled-or-grayed-out-check-box-options/

  Hope this helps,

  Steve <> Microsoft Partner

• Unfortunately to USERS C:\ D : | ------as being complete. There are now corrupted files and programs are missing. Could you help her? Thnks.

  Unfortunately to USERS C:\ D : | ------as C: is full. There are now corrupted files and programs are missing
  and do not work. Most of the files are there but they are, but they are in different folders.    Could you help her?   Thank you very much.

  Well we are all learning, sometimes doing unwise things :(

  If you can not use a restore point, and the moving process simple origonal location cannot be done.

  I would like to copy your files to external data, make sure that you have the keys that can be required for programs, then start with a win clean installation, deleting all partitions during the process, and then using the entire disk for C space.

  You can different circumstances redirect your libraries only to another drive, other than C.

• Disk space missing after uninstalling VMware Fusion 6

  Hello

  I tried a trial of VMware Fusion, but it didn't quite meet my needs so I uninstalled according to the instructions of http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1017838

  I also deleted the folder where I had my stored VM.

  It seems that I did not return the hard disk of the virtual computer however space.  Before the trial, I had ~ 320 GB 500 free, now I ~ 120 GB free... and using a tool such as disk inventory X, shows only ~ 180 GB of space used... so it seems that ~ 200 GB of space disappeared completely.

  Everyone knows this, any suggestions on fixes?  I did the usual as ensuring that I emptied the trash and that you have restarted my Mac.

  I hope I don't have to resort to a facility clean, just because I have tested this software!

  Thanks, I downloaded GrandPerspective and noticed that a lot of "space used various" showed, ran it and disk inventory X as root so that all hidden files will be published and it turns out that, for some reason, there were a bunch of copies of my VM in my mobile volume backups time machine.

  A ran 'sudo tmutil disablelocal' according to this thread http://www.mactalk.com.au/11/107659-my-mobilebackups-volume-taking-up-200-gigabytes.html and my space is back!

• Mac os Sierra, Dictation and speech pain missing from system preferences

  Hi, it's Stephen. I've upgraded to mac os Sierra, and now, for some reason, Dictation and speech is missing in system preferences. It is preferably pain that I use to activate enhanced dictation, which is a feature that allows the use of dictation, even in offline mode. I reported the problem/bug to apple and I called him support Apple Care technical on this subject yesterday. Can someone tell me why Apple took dictation and the word of the preferences system Mac os Sierra? Or was it just an accident? Any help would be greatly appreciated. Thanks in advance

  It was not withdrawn. There is a tab in the keyboard preferences. And there is more in the accessibility preferences.