"vpn 3002 hardware client" and any other vpn device

Similar Questions

• 3002 hardware client questions

  You can use a dynamic external ip address with the 3002 hardware client, or should it be static? I am assuming that you can use a client mode, but what about in network extension mode? Also, I just wanted to check that an external switch or hub can be used with version single internal port in order to support multiple hosts. Q & A 3002 page knew a little about it.

  Thanks for the help,

  Adam

  Yes and Yes.

  You can use DHCP on the external interface on a 3002 using the extant network mode.

  You can use an external switch or a hub with the single version port internal.

  No link to send your way, but I could do so personally (and now)

• Do I need another new Windows Update to activate my Windows Vista to access the free secure recommended downloadable program for downloading various files and any other information you want?

  Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle

  Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for

  downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies

  Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle

  Hello Randle,

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• Change the default Port of vSphere Web Client to any other port 9443

  How can I change vSphere Web Client by default Port 9443 for any other port in Windows vmware web client server after the installation of the client web and vCenter camera well?

  You can change the post-install Web Frontend Client vSphere 5.1 port by editing the following on the Server Web Client configuration file:
  

  C:\Program Files\VMware\Infrastructure\vSphereWebClient\server\config\tomcat-server.xml

  
  

  Find the entry below and change the port accordingly:
  

  Then restart the WebClient service to make the change take effect.

• Windows KB 2600217 & KB2633870 update will not be installed. Have you tried auto-fix and any other deputydog711

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2633870)

  Download size: 3.4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=232393

  Help and Support:
  http://support.Microsoft.com

  Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2600217)

  Download size: 17.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  This update addresses performance issues in Microsoft .NET Framework 4, reliability and stability. After you install this item, you may have to restart your computer.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=232526

  Help and Support: I tried all above, including the links: help NY MIKEY
  http://support.Microsoft.com

  After beating my head against a wall for hours... What follows to finish I would like to install this.

  1. do a repair on the .NET client (go to add/remove programs and choose the repair)

  2. run the Microsoft FixIt - I'm not sure that it IS really something, but just to relay the steps I followed to 100%.

  http://support.Microsoft.com/kb/976982

  3. copy NDP*.exe to your OS locally on the server in question

  4. cross your fingers and run it.

  I hope this helps you!

• "WINDOWS EXPLORER has STOPPED WORKING" error every time I try to open things like 'Control Panel' and any other file of windows.

  This happens when I try to open any file from windows Explorer. It began to happen yesterday after my mother has finished using the computer. I think she did something (a click on something online somewhere) and may have introduced a virus into the computer. We have only a very minimal virus protection so I see not what is a great possibility. When I came home there was some files randomly on the desktop and I went to "My computer" right now (with difficulty) and removed all the new things, she got on the computer, that she doesn't want to download (which means they came when she clicks on something somewhere online). I thought I had fixed it but now I can't even open 'my computer' because of this error. Help, please

  Loading Windows in Safe Mode and check if the problem is here. You can use the system restore as well. You can also use this program and disable Windows Explorer extensions that were not Microsoft.

• Ideas for why HttpConnection works with some clients and not others

  Hi, I have an application that downloads and analyzes an xml file. This works perfectly for some users and does not at all for others. They can even access the XML on the web, but it won't work with my application. Some said they used a bold font, other OS 4.5. Here is an excerpt from my source:

  HttpConnection conn = (HttpConnection) Connector.open(url);conn.setRequestMethod(HttpConnection.GET);String _node, _element;DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();docBuilder.isValidating();Document doc = docBuilder.parse(conn.openInputStream());doc.getDocumentElement().normalize();NodeList list = doc.getElementsByTagName("*");// .. parse data
  

  Edit: formatting is all messed up

  Not necessarily. You * can * make your app to use BIS-B if you are a partner of the Alliance and I recommend this, but this is not necessary.

  Your customers can also connect using WAP 1.1, WAP2 or direct TCP. I would recommend that you try WAP2 first, this requires no info gateway APN or WAP. You can get the WAP2 info directly from the maintenance book.

  Try the code in the example (in the white paper that I attached earlier).

  Your best bet is to develop some hueristics of network connection using the CoverageInfo class (see the documentation of the API).

  We are doing something like this, at the bottom of the list:

  BES

  BIS-B

  WiFi

  WAP2

  WAP1.1

  Direct

  I think that in the USA, CA, UK and Western Union, BES and BIS - B cover approximately 90% of users. Once you walk out of those areas, it starts to be more exciting.

• How can I configure my bookmarks in the text bar and any other toolbars of icons?

  It seems that I can change all toolbars to be text or icons. I want the look of Firefox 3. In Firefox 3 the personal bar was text only wile the navigation toolbar was icons. I can't figure out how to make my Back/Forward/Home buttons icons with my favorites in the text only toolbar.

  Bookmarks Toolbar addons:

  • https://addons.Mozilla.org/en-us/Firefox/addon/bookmarks-deiconizer/ (performs just a function)
  • https://addons.Mozilla.org/en-us/Firefox/addon/roomy-bookmarks-toolbar/ (Does a lot more; settings in the add-ins > Options, tab "Icon settings")

  To show "icons only" on toolbars (other than the Bookmarks Toolbar), follow the instructions in the section below to open the "Customize toolbar" window, her lower left, change the 'Show' in 'Icons', then click on 'Done' at the bottom right of the "Customize toolbar" window

  • https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• I am infected with 'Windows Police Pro' & I can't connect to the internet to launch the live scan. The malware has disabled regedit, and any other approach, trying to regain control.

  I searched and downloaded every suggestion of recovery I can find on the internet. Nothing worksIdeas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Run the system restore and see if you can return to a time before the infection occurred.

  Follow the steps in the article of bleepingcomputer.com Remove Windows Police Pro (removal Guide) .  If necessary, download the files on another computer and copy them to your.

• How to recover a database containing only the DBF and CTL files and any other information?

  Hello

  I have the following situation: a customer sent a group of files, he said be a "backup" of an old database, which is more in line (he doesn´t use our software more). However, he needs recover data in this database. The person at the company that generates these files doesn´t work more, so we don t have the following information:

  -Version, connection details, service names, user names, or tablespace databases.

  We just said that these files have been saved on a DVD, and is the only source that remaining.

  The files he sent are:

  ctrl\cf_satp_01.CTL

  ctrl\cf_satp_02.CTL

  ctrl\cf_satp_03.CTL

  dad\df_satp_dad_01.dbf

  idx\df_satp_idx_01.dbf

  rbs\df_satp_rbs_01.dbf

  redo\redo_g10_m1.dbf

  redo\redo_g11_m1.dbf

  redo\redo_g12_m1.dbf

  sap\df_satp_sap_01.dbf

  spo\df_satp_spo_01.dbf

  sys\df_satp_sys_01.dbf

  tmp\df_satp_tmp_01.dbf

  Is there a way to access this data? Or if I can say our costumer that sorry... sit and cry... your data is lost forever...

  I m unaware of backups of database Oracle, having worked with discharges every time a need something like this, so apologies if the answer is obvious.

  Sorry for the poor English too!

  Thank you

  Luiz Fernando Meier

  How has taken this backup? Cold or hot (online)?

  If online, then the backup is unrecoverable.

  If offline then it is possible to get it back. You must know the database version and the platform of the source.

  You need the version of the base to know which version ORACLE_HOME, you use, if you need to upgrade the database once restored.

  You need the OS platform to see what type of endian is your data files, because that limits also what OS you can restore.

  Kind regards

• Why Firefox and any other browser constantly trying to connect to 178.63.55.0?

  3 browsers I have only Firefox constantly seeks to connect to Hetzner. I tried several firewalls, but none works. To meet nonstop with Hetzner in Germany on port 443.

  Have you downloaded this version of Firefox from the Mozilla site?

  If you still don't find the Safe Mode option, you will have a non-official copy.
  
  If this is the case, please perform a clean reinstallation. ^{(More details)}

• flight of the Internet through bluetooth and any outher wave device

  gDay the names mick / questiom.

  I have ileagaly of people using my internet connection using blue toth and whatever the use of piggy of my connection back and increase my account downloads how to find them and how can I stop them or I can do anything on that flight?

  Hi Mick,

  If you have a wireless network, you set up a network security key, which turns on encryption. With encryption, people cannot connect to your network without the security key. In addition, any information that is sent on your network is encrypted so that only computers that have the key to decrypt the information can read it. This can help prevent attempts to access your network and your files without your permission. Common wireless network encryption methods are Wi Fi Protected Access (WPA) and WPA2. For more information, see set up a security key for a wireless network.

  Make your network more secure
  http://Windows.Microsoft.com/en-us/Windows-Vista/making-your-network-more-secure

  What are the different wireless network security methods?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-different-wireless-network-security-methods

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "the network card experiences driver or hardware problems" and "To ensure that your Internet protocol bindings are Correct" on Dell Inspiron 530

  Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
  
  I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.

  ipconfig/all statements

  Hostname...: wayne-PC
  Suffix main DNS...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  That's all. Windows gives errors two errors:

  (1) the card network knows of driver or hardware problems

  (2) check that your Internet Protocol connections are Correct

  I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.

  I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.

  Hi MButIer,

  -How long have you had this problem?
  -Was any change in software because the computer before the show?

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

   

  Perform a System Restore to a point before the show and check if this solves the problem.

  See also:

  System Restore: frequently asked questions

  If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Oracle 11g Client and Enterprise Manager

  Just need confirmation that the old Java based Enterprise Manager 10g left for always with 11g and there is no installation of 11g client management console (at least I can't find one). And after searching for the ndo son Oracle documentation, it seems that I can install database 11g on my local pc and then have a dbconsole (not the grid control). Please confirm that this dbconsole only points to the specific database that is installed on the same pc, and it cannot be used to manage remotely located 10 or 11 g databases. I'm still in the planning stages for the installation of grid control and want to use the more small enterprise manager - java control. But even once, there no such Oracle 11 g application now? I have to use the grid control to manage multiple databases?
  
  Thank you
  Curt Swartzlander
  S/N

  Ozark DBA wrote:
  Just need confirmation that the old Java based Enterprise Manager 10g left for always with 11g and there is no installation of 11g client management console (at least I can't find one).

  Confirmed. Identical to the installation of the database.

  And after searching for the ndo son Oracle documentation, it seems that I can install database 11g on my local pc and then have a dbconsole (not the grid control). Please confirm that this dbconsole only points to the specific database that is installed on the same pc, and it cannot be used to manage remotely located 10 or 11 g databases.

  Confirmed. The DB Console is linked to an ORACLE_HOME one HOST for a single INSTANCE. The HOST and the INSTANCE are used in the directory naming (of all stupidity) and the content of the configuration file under the ORACLE_HOME.

  I'm still in the planning stages for the installation of grid control and want to use the more small enterprise manager - java control. But even once, there no such Oracle 11 g application now? I have to use the grid control to manage multiple databases?

  Confirmed. Fortunately, the grid control is included in the license database in accordance with the manual of licenses of database, and you can place the grid on a separate machine control. As the Grid control is powered with a single agent for all products (and any other database) on the target host, the grid control puts on a much smaller footprint on a machine of database that even the old console Java.

  Note that the grid control of 11g (at least) will tomorrow announce Webcast - check the RTO.

• If Firefox is set as the default browser and any application tries to open a new window, it doesn't work and I get the error "Firefox is already in running... »

  Here's what I'm running:
  Microsoft Windows 7 Service Pack 1, fully updated to 04/10/2012
  New installation of Firefox 11. No add-on enabled following troubleshooting.
  I am a user has administrator rights
  SAMU is disabled.

  For starters, this has happened since Firefox 10 or more. A couple of months now.

  I am able to open Firefox. My modules worked (ABP, Flashblock, ABP Element Hiding Helper, IETAB2, Downthemall, Greasemonkey, extension of 4chan) had no problem. Firefox is defined and has been fixed for the past two years as my default browser.

  But since about 10 or so, maybe Firefox before, if I opened a session of Firefox and any other application attempts to open a session in a new window, I get the Firefox is already running but not responding do not error. »

  I tried to follow the advice of already posted troubleshooting (glance to parent.lock files left [no date], several sessionstore.js [no date] files, create a new user profile, has tried to erase the 'read only' permission in windows 7, but as soon as it is cleared, only read permission back.)

  As a last resort, I deleted the Firefox folder, the directory %APPDATA%/Mozilla in its entirety and then used CCleaner to remove all references to Firefox in the windows registry, and then made a complete re - install, without extensions installed right now.

  I checked the preferences and have the option "open new windows in a new tab" checked. The problem persists without worrying if this option is checked or not. This problem persists in or out of safe mode, even with the new facility.

  Test case:

  All cases:
  Firefox is selected as the default browser for windows 7

  Case 1: Log in to firefox. Use any other program that is trying to open a link to their Web site in a new window browser or the new browser session. "Firefox is already running" error

  Case 2: Open a firefox session. Right click on Firefox in the taskbar. Select 'open in new window '. "Firefox is already running" error

  Case 3: Open a session of firefox. Select the Firefox Menu > new tab > new window. In fact, a new window opens.

  This is the only method of opening a new window in the same browser session or profile that actually works on my system. Attempting to open a browser session from the task bar "open new window dialog" or opening a new window while a current window/session is running will not open firefox in a new window or a new tab in the current session. The "Firefox is already running, but is not responding" error will occur every time.
  

  Make sure that you do not start Firefox with the - No.-remote switch or have defined the MOZ_NO_REMOTE = 1 environment variable (Control Panel > system > advanced > environment variables).

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile