VPN as backup connection direct link
Hello
There's a direct connection between the sites running ASA in both entities, we set up a VPN as backup direct link, y at - it a trick to do it?
Now we're traffict of routing between sites by an interface and static routes, we don t know how to put up right metric to VPN as backup.
Thank you.
Hello
If you use a separate interface for the VPN backup tunnel and using static routes, you can use IP SLA on the ASAs follow main interface and use it although it is upward.
The IP SLA will follow and use the interface of backup (the backup tunnel release) when it occurs on the primary link.
Just like in Cisco IOS, the SLA of property intellectual is linked to a track object that, in turn, look at the static routes.
The priority is managed by setting the AD manually on the static routes.
Thus, when the primary links recover, it will be used again (as he preferred).
It will be useful.
Federico.
Tags: Cisco Security
Similar Questions
-
Backup VDR when connected directly to ESXi host (no vCenter)?
I have a single host of vShpere ESXi with camera VDR configured and running. I don't have a vCenter. I have the plugin installed into my vSphere client and I am able to set it up. I have created a backup task and provided it works, however I get the following message in th events and journal
"Connected to the ESX Server, automatic backups will not be executed."
VDR works when connected directly to a host no vCenter ESXi 4? If so, what is my next step in this problem?
VDR works when connected directly to an ESXi 4 host with vCenter not?
N °
If so, what is my next step in this problem?
Buy vCenter
-
Hi all
I look through the Group and see a lot of questions
the outgoing on two internet links traffic load balancing. My question is
a little different and I can't find an answer online.I have an ASA 5550 with 2 internet links, A and B.
Currently, the SAA doing NAT for the company on A network
connection and receive inbound connections from the VPN client on the same
A connection. All this is perfect. But what I would also
I, the ASA accepts connections customer VPN on the link of B. I have
can't get this to work.Anyone have any idea where to look?
Thank you!
No, this is not something that is supported. VPN Client that connects to two 2 links ISP requires 2 default gateways that are active at the same time. ASA does not support this configuration. It does not support 2 default Active gateways at the same time. It supports only 2 links ISP when it is configured as a backup when the primary ISP link is down.
However, you can configure the second supplier of access VPN site to site and the first ISP for internet access and vpn client out normal. Because with the site to site vpn, you know the static ip address of the peer, then you can create a static route to the peer pointing to the second ISP link.
Hope that makes sense.
-
Hello
just a quick,
TOPOLOGY
ASA isps1 - 197.1.1.1 - outside
ASA ISP2 - 196.1.1.1 - backup
LAN IP - 192.168.202.100 - inside
I have configured Tunnel on the interfaces (external and backup), but is to link both legs public to serve a thare as redundancy for vpn users and users of the vpn tunnel leave pointing inside IP whenever they want to establish vpn sssion, we want it to be one, so if an interface fails vpn users will not know , but he will try the second for the connection. instead of creating the profile for the two outside of the leg on the vpn client.
is this possible?
Hi Rammany.
In your case, you have only an ASA that connects with 2 ISP in another segment IP... 196.x.x.x (Link1) & 197.x.x.x (Link2). What your condition is you want to have the VPN client who must be consulted with backup. If 196.x.x.x link fails, it should automatically take 197.x.x.x link. That too we should not have the config set in the VPN client backup server. You don have the possibility of having standby active also in asa single.
I think n so it will work with your current design.
This option is if your VPN client supports host name resolution (DNS). You can have the VPN created for both the public IP address share the same host name keeping the bond as the primary address 1 and 2 a secondary address. It will work alone.
Hope someother experts in our forum can help you with that.
-
VPN Client TCP connection to router IOS
Hello
I try to get a VPN client to connect via TCP to a router. I currently have the router put in place (and work) in using a VPN - UDP. Unfortunately one of the sites I visit will not allow VPN traffic outside of their firewall. I have searched all over the site of Cisco and can't find any information on the IOS configuration to accept TCP - VPN connections. I would like to change the TCP port 80, so my VPN traffic looks like just standard internet browsing my client firewall. Any links/pointer would be greatly appreciated.
Thanks in advance!
-Joe
Take a look at this:
http://www.Cisco.com/en/us/docs/iOS/12_2t/12_2t8/feature/guide/ftunity.html#wp1310210
http://www.Cisco.com/en/us/docs/iOS/12_2t/12_2t8/feature/guide/ftunity.html#wp1305478
http://www.Cisco.com/en/us/docs/iOS/12_2t/12_2t8/feature/guide/ftunity.html#wp1315635
Please rate if useful.
Concerning
Farrukh
-
Cisco vpn client to connect but can not access to the internal network
Hi all
I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network
Any help would be much appreciated.
Hi Samir,
I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
(The link above includes split tunneling, but this is just an option.
Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.
Let me know if this can help,
See you soon,.
Christian V
-
I live in the Isle of Man, an island off the British coast. We don't have a fast broadband connection and download CC applications through the CC desktop application is not successful. I desperately need to be able to access the installers, dmg files to install in offline mode on my Mac. I use Photoshop CC 2014 and LR 5 and I can not update one of them successfully. We are waiting for you to sort out direct links to installers for centuries now, what is the problem? Please sort!
LR is above and here's ps, Adobe Photoshop keep up-to-date
-
First will not open my project after that I have record in SpeedGrade via Direct link
First will not open my project after that I have record in SpeedGrade via Direct link
Last night, I installed all the updates of CC, everything went well.
All day I was doing the color correction in SpeedGrade to PremierePro project via direct link.
After I finished, I wanted to go back to first to make an export (my manager was waiting for a sample) only, when the first attempted to connect to the project I worked on SpeedGrade, could not open!
She the Saturn: "this project has been saved in a newer version of Adobe Premiere Pro and cannot be opened in this version.
Before panic to my Director of waiting, I've saved every look I did in SpeedGrade as an individual LUT I could manually apply in an earlier version of the PremierePro project. But it took a long time and it's may not be a long-term option.
What can be the problem between saving in SpeedGrade and then back in PremierePro?
I PremierePro CC 2015 v. 9.02 (6) and CC SpeedGrade 2015 v. 2015.1
I'm working on MacBook Pro Retina display 15'.
Simple... you SpeedGrade 2015.1 (9.2) and PrPro 2015.0.1 (9.0.1). They don't 'work' together.
You must get your PrPro up to 9.1, 2015.1 release. If your desktop application Adobe CC is not show your 'eligible' for the upgrade PrPro, sign out of it, then back in... that often useful. If this isn't the case, you may need to use the soft Cleaner CC Adobe to remove the application from Office CC & then reinstall it and reconnect.
https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html
Neil
-
Direct link to Adobe SpeedGrade disconnects
I have a PP CC project that contains some PSD files for titles.
When I use the 'Direct to Adobe SpeedGrade link' (CC) and back to PP these clips are to be replaced by the chart in offline media.
If I repath the PSD is the same thing whenever I use the feature direct link - very frustrating!
To be clear the PSD is not move or change during this brief.
I'm doing something wrong here?
Thank you in advance for your help!
See you soon,.
Olly
same symptoms with me with a direct link to first in SpeedGrade offlines Photoshop documents
I had to save the psd under tif and replace the tif first psd in order to constantly connect the DSP after going back to the first
-
Classification of the layers with Direct link
As the layers of classification cannot be created if I use the direct link to my project from creation to speedgrade. Can I create adjustment layers 3-4 in first pro and then send my project to speedgrade and use my these as regular ranking adjustment layers layers in speedgrade?
Yes, that of right, and now is the only way to use layers of classification in Direct connection mode.
-
So, I was wondering how to do something for awhile...
So, I want to be able to link directly to a BLOG via the Navigation bar at the top of a page.
I want to be able to do this without having to go through a module that connects to the OVERALL.html THEN
So in short, I want the bar NAV link to connect directly to Overall.html. (I tried to connect directly, go.)
Any thoughts?
Thank you!
PS-sorry if this is an easy answer, I can't find it.
Thanks again!
As says Kenneth, but a small change.
/_blog/titlefoblog
Where titleofblog is what you call your blog. So if the title of your blog is my Blog, for example, try:
/ _blog/my-blog
-
How to download with a direct link address
How do I start a download if I have a direct link address? I don't really know what downloader is installed on my PC in Win10 and I don't find it in the list of programs my PC. I use a VLC Player.
Thanks
If you have a link to a file, right-click and select Save the link under
-
Unable to open a direct link with my SMS and email
Hi, I have a 6 + 64 GB iPhone a year and 3 month old device.
I noticed that since I downloaded and installed to 9.3 last IOS, I can't open a URL or a direct link on any of my text Messages and emails! I click on the URL and nothing happens! Help! It's totally frustrating. I shouldn't have installed the latest iOS. Please tell me that there is an IOS update that corrects this frustration!
Thank you.
sumsplus wrote:
Please tell me that there is an IOS update that corrects this frustration!
You will have to show patience. Apple he has not yet released. In the meantime, see if something in this thread helps:
-
Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes. 29 February 2016
While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6. I decided that the direct connection to the internet would be the fastest way to download and install the software. During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges. At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.
Until that point, I was very pleased with the device and confident in the ability to use Wifi and data. Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.
Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.
Someone at - he had a similar experience and understand what went wrong?
Thanks for your support,
Jerry
JerrolK wrote:
Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes. 29 February 2016
While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6. I decided that the direct connection to the internet would be the fastest way to download and install the software.
You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.
He did what you asked it to do.
-
I have a p6310f and I have my cpu fan connected directly in my msu and fan controller how do I
can say that the cpu fan has no error and fan service doesn't have a system soon error
EDTIIThe fans (CPU and case) are attached to the motherboard for this (the sensors) headers. Connect directly to the power supply (not a ' SSM') bypassed motherboard sensor circuit.
Maybe you are looking for
-
I have two account I just checked from time to time. I don't want to create another profile. There is a (UN) check that I forgot?
-
HP pavilion model p6232p My fans have been really strong. I would take the cover wide and clean inside. How can I remove it?
-
Double tap to sleep at the home screen does not
Follow-up to the command prompt and set the switch to 'works '. This feature works only if the lock screen and password is enabled (what I chose to do not)? Please tell us what I have to do to make this work.
-
Windows 7 loaded in the Bootcamp partition on my refuses to iMac (with mountain like o/s Lion) to recognize the Apple Bluetooth mouse. How can I put this right please?
-
an Officejet pro L7680 on an iMac/Lion 10.7.3. Printer fails to remove complete print and instruction later printing spits out several pages or the stands. Manual removal of prior work, duly completed, printed work longer allow printing. Did not have