VPN via wireless

Similar Questions

• Faxing via wireless HP OfficeJet Pro Premium 8600 - Win 7 64B

  I'm trying to fax directly from my computer using my P 8600 installed via Wireless.  Printing works fine, faxing from the itsewlf of the printer works fine, just trying to go green.  The driver shows Fax - HP OfficeJet 8600 network, Sami that the printer is configured, but I get the Sendfax error - cannot communicate with printer when faxing. What I'm missing here.

  Hi Brian-DS,

  When you did uninstall it and reinstall, did you use a download from hp.com for the re - install?  Otherwise, you could try doing a complete uninstall and then use a download from hp.com for installing the driver.  Click here

  If this does not help, I recommend you contact HP to Contact HP worldwidesupport.  They should be able to help understand you what is happening.  It would be good if the agent is able to your computer remotely and all check.

  Let me know what happens.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to make win 7 to prefer wired via wireless connections

  I have 2 internet connection in my laptop. wired or wireless. Win 7 prefer him wireless on the trendy though wired a metric is lower. How can I get win 7 to prefer wired via wireless connections?

  The average best absolute to ensure that you will always connect to wired and not wireless is to disable wireless on your computer. Just note that you need to re-enable it if you ever want or need to use wireless internet.

  To enable or disable the radio on your computer: click on START, then Contorl Panel, then Device Manager. Right click on the wireless adapter , then click on disable.

  To reactivate, simply click in the same place, which should read allow.

• VPN via a natted router

  Hello

  I think that vpn via nat is 'enabled' in the 6.3.1 software for the pix? I have problems to run. Can someone give me directions, including everything I need to know about the router?

  I guess that everything that I have to do is create a static nat from 1 to 1 of the legal IP outside the pix outside IP router? Then configure the vpn as usual to accept vpn as usual (I use the 4.0.1 cisco client).

  I'd appreciate any help.

  Thanks for your time

  Andy

  I think that you need to configure the NAT-Traversal, the command to do this is isakmp nat-traversal]

  NAT - T can be enabled or disabled:

  By default? OFF for site to site tunnels

  By default? We'RE for hardware and software VPN clients

• Unable to connect via wireless

  Hello

  I use a HP Pro book Windows7 professional. All systems were functioning well when the wireless connection has been disconnected.
  Later my laptop cannot connect via wireless even if system the wireless still work correctly on my ipad.
  Please tell us what I should try to fix this problem.

  You have run the wireless troubleshooting tool? - http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Is your wireless network of the specified interface as active or disabled, if disabled then re-enable-control panel, network and sharing Center, change the settings of the map, right click on your device to turn on or off (you will be asked for admin at some point).

  PS - extra thought, some laptops have a wireless switch network. It is not struck off there?

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• HP wireless printer (3545) showing only printer and scanner, connected via Wireless

  When I connect via USB, I see Print/Scan option in the settings system-> Printers & Scanners

  But when I connect through wireless, I only Print

  What is the problem?

  Even in the HP utilities, I don't see this option "Scan to Computer" when it is connected to the wireless printer

  Hi TahseenJamal,

  Thanks for the video, which has been most useful.

  I suspect that the router can be not broadcast the Hello Protocol as it did in the past. To resolve this problem, please follow the instructions below.

  1. Out of the router, unplug the power cable
  2. Out of the printer, unplug the power cable
  3. Stop the Mac
  4. Give up everything for 1 minute and then reconnect the router
  5. Once sighted routers are on, reconnect the printer to the
  6. When the wireless printer is solid, turn on the Mac
  7. Now try to add the printer that you had previously, you should now see the Hello or Hello printer multifunction beside him.

  If this does not resolve the problem, it could be the printer. Follow the steps below.

  On the front panel of the printer, the arrow down to settings, then press OK. Down arrow for wireless and press OK. In the wireless menu, go to IPV6 and turn it off. Once IPV6 is disabled, try to add the printer in the preferences system again.

  Please let me know if either of these solutions solve the problem and if one of them, please also let me know, thanks.

• OfficeJet pro 8620: HP 8620 won't print via wireless for nay on my home mac

  I have 2 Macs in my home, Macbook, and Macbook Pro running Yosemite. I tried to implement a pro 7310 office via an ethernet cable printer to print wireless from these two macs and after 3 frustrating months trying everything that I could find, I bought the 8620 thought that would solve everything.

  Instead, it's the same. I am trying to print from firefox or word or anything and it cannot find the printer. But if I turned off everything, including the Mac and the router (N of Belkin N300 router wirleless) and the computer and then turn them back on, the printer is detectable and prints well. It just seems to disappear and I can't find it when searching for available printers after a few hours. I installed the last softeare for this printer and it worked when fine forst, implemented.

  Any help would be greatly appreciated that I spent way too many hours trying to figure this, it doesn't help that I'm not that tech savy.

  Thank you!

  Hello @bokke ,

  Welcome to the HP forum.

  I understand that you are having problems of communication between your two Macs and your 8620.

  I would like to help.

  Three things have caught my attention.

  You said that this is happening to both computers.

  You also mentioned that the same thing happened to another model of printer.

  Finally, after you power cycle your network everything works. At least for a little while.

  I feel that we should seek less software and more to your network.

  Belkin N300 wireless N Router, how old is this router?

  How is the printer to the router?

  Your router should have the following configuration

  ~ The multicast must be on or enabled (allows connectivity Hello)

  ~ Wireless Ports, they can also be frozen in security software:

  The incoming (UDP) ports: 137, 138, 161, 427

  Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500

  ~ Our printers support only the 2.4 GHz not 5 GHz

  ~ Recommended that the network name and password DO NOT containing and spaces/punctuation or special characters ~ Dual Radio enabled (for b/g wireless & networks n)

  ~ Mac disabled filtering

  ~ The built-in firewall must be the default or the lower settings

  This should solve the problem.

  PORTS TO UNLOCK.

  UDP: 137, 138, 161, 427, 80 & 443

  TCP: 137, 139, 427, 9100, 9220, 9500, 5222 5223

  So please make sure that multicast & Hello are enabled. Also never hurts to check for an update of the firmware.

• Can not access internet via wireless HTTP 404

  I plugged a wireless (NetGear) adapter to my PC to be able to access the internet via the card my husband Verizon Wireless.  He says that I'm connected to the internet, but the only thing I get when I try to connect to any site is error 404 web page not found.  It's probably something simple, I need to set up on my desktop, but I can't find a way to solve this problem.

  Thank you... I actually got a response via Widgetbox.com yesterday.  I had to go to the workstation, Panel, network and Internet Options, Internet connections, connections and go to LAN settings and uncheck all checked it (the checked was something to do with a proxy server).  And that's all that it was him - everything has worked correctly!  Hope this helps someone else.

• Can't VPN via WRT54G

  Hi all

  Until last night, I used an old Linux box to route to the web behind NAT.   But last night I got replacedthat with a WRT54G, 8.00.2 firmware revision.  Everything works fine, except one thing.

  I use a PPTP VPN connection simply return to my place of work.  Last night, I tried my laptop and it doesn't have both wired and wireless.  But I peut ping at the address I am trying to connect to...

  So I think it's just some settings on the router, Miss me him and I didn't play with it until I got a few tips from the experts here on the forum.

  Thoughts?  Thank you!

  Chris

  The WRT54G supports PPTP transmission.  Check the Security tab of the web interface of routers.

• HP 3050 - Cant connect what either Via Wireless

  I am very confused as to what's going on is how my computers are connected...

  My main PC is connected to my router via an ethernet cable

  My 2 laptops are connected via the wireless

  They are not in a network so to speak as in they see and share files they just use the router to connect to the internet now my PC I got works great it sends information to the router via Ethernet and bang printer prints via radio, now for my laptop, I installed the software CD V 22.5.0 depending on the disc. I went through the set up and wanted to connect wireless so I followed the guests at the monitor in use the USB cable to install drivers for devices and so said my printer name and network that it connects any see next screen it does not connect to it actually.

  I have disabled the windows firewall on the thought of the laptop that could be, but no I even went to the screen where I can manually the IP address of the printer and it will still find and connect to router is a Netgear DGN2000 with last firmware, I put in place so that all the material that I know who is connected has a reserved IP address so everything is at the same address all the time.

  I even tried to enter the printer via IP address in IE9, but it won't even connect to it even searching in the add printer it won't see my model, even if the software is installed unless that I keep it connected via USB to keep drivers

  Can someone help because I tried seriously everyday

  After much pulling I finally hair fixed I just I went back to square 1 and by default from the router to the factory settings and started from scratch, I address reserved only my PC and laptop and the PS3 and a not to bother with the printer and it installed properly on my PC and laptop.

  Bare in mind that it was the old laptop I had, I had a new Exchange as one who was 22 days the card N Wireless dead on it then it may have caused the problem, but I can now printer on my laptop thanks to God.

• Unable to connect via wireless with SSID broadcast disabled

  I want to configure my router for my SSID is not broadcast, because I think it's a logical step to take for increased security. I have not been able to do since I started using my new laptop Inspiron 5558. I tried this several times and every time I turn off the SSID broadcast, I am not able to connect to the Wi - Fi on this laptop. Other remote computers in my house and my smartphone connect without problem, but nothing I've tried helps my new computer Dell laptop to connect via Wi - Fi, except for allowing the SSID broadcast.

  I have a router Actiontec MI424WR reverend E. I have installed the new driver and the Intel PROset utility and unfortunately nothing has changed. I went to the settings to investigate some of the other solutions offers, and I came across something that seems to have solved my problem. What I found in SETTINGS/network & Internet/change adapter options/Wi-Fi/see the status of my properties of connection/Wireless / on the connection tab, it was an uncontrolled area with the words "connect even if the network is not broadcasting its name (SSID). I checked this box, and since then, I was able to connect to my network wireless with SSID broadcast disabled. I will now call this resolved and if no new problems arise. start a new post. Thanks for sticking with me on this.

  Ed J.

• Films streaming Itunes to Sony TV via wireless connections?

  Trying to play computer Itunes movies to HX from Sony TV series with connections wireless establishesd already, but error message in Windows Media player: "cannot retrieve information about the UPnP Server media"after a minute or two." The TV can access the files on the computer, but it will not pick up Itunes movies (maybe cause they are MP4 not MP2? so I thought I could spread via media player without success please help me.)

  Hi Alliwantfor Christmas,

  1. what type of Internet connection do you use?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Getting started with streaming media
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-media-streaming

  Additional information:
  Stream your media to devices and computers using Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/stream-your-media-to-devices-and-computers-using-Windows-Media-Player

• Version 4.0 Client VPN via a DSL connection

  Hello.

  In my corporate network, I have configured a PIX 520 firewall with vpn configuration, then, when I am connected via dial-up connection there is no problem,

  but I have a DSL connection, a DSL router, the router ethernet workshop has the 192.168.1.1 ip address with my PC the IP 192.168.1.3 is mandatory that I must have a public ip address for my PC with the VPN client software?

  because I have problems, and the message displayed by the software is: "secure VPN connection terminated locally by the motif client: the remote peer not responding."

  is there a problem with the NAT (in my DSL provider's network? I need a static mapping to a public ip address?,)

  Thanks for help me.

  If you have v6.3.x fw pix, nat/pat is not going to cause a problem, it will automatically negotiate UDP encap.

  THX

  AFAQ