VS2008 does not install on Windows 7 Professional

Similar Questions

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 7.2 framework does not install under Windows 7 Ultimate

  HELP: FrameMake2 7.2 does not install under Windows 7. Near the end of the installation, it hangs with a blank dialog box and a warning. Nothing else.

  All view

  Keep smiling

  Thomas

  Hi Thomas,

  Long time no see...

  If FM7.2 is not officially supported, I think you must be in compatibility mode so that it can behave properly with Windows 7.

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Kodak esp3250 drivers do not install on Windows XP Professional 64-bit

  Hello

  I just want to ask if it is possible to download drivers for my Kodak ESP 3250 printer. I heard that it is not compatible with Windows XP Professional 64-bit machines, but I think that it is not true.
  Thank you
  Zuga01

  If you really have XP Pro x 64 (which is rare), you're right that current software/driver Kodak for its all-in-one printers (including the ESP 3250) will not work for your operating system.  See http://support.en.kodak.com/app/answers/detail/a_id/32108/selected/true

  It is possible that Kodak may have an older version of its software that works.  See http://support.en.kodak.com/app/answers/detail/a_id/23858/related/1/selected/true

• updtes does not install on windows xp home edition 2002 service pack 2

  Hello

  After formatting window updtes do not install on windows xp home edition 2002 service pack 2

  Rabindra Nath Nandi

  HOW TO get a computer that is running Windows XP SP1 (a) or install SP2 fully patched after a cleaning
  https://groups.Google.com/Forum/?fromgroups#! msg/microsoft.public.windowsxp.general/quMfqk8Eb94/K93XrUGuZqAJ

  VERY IMPORTANT! => Step #4 links above, making resolution method #2 (No method no. 1) on this page: http://support.microsoft.com/kb/943144

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  More: http://aumha.net/viewtopic.php?f=62&t=44636

• New installation of Windows 7 Professional 64 bit does not install the Windows updates

  I tried it twice.  I install Windows 7 Professional 64 - bit on a ThinkPad T61.  After installation and activation successful Windows, I tried Windows updates.  The 'check updates' never ends.  After the first installation of Windows, I tried all sorts of bugs found either here or other Windows Help Web sites, does not.  So I reinstalled Windows, but with the same result.

  After that the first installation was impossible to install updates, I received the Windows Update stand-alone Installer and downloaded the stand-alone files for updates.  Would install things like IE updates, but no security update would install, as well as most other updates.  Yet once, just standalone Setup would continue to search for already installed updates without ever ending.

  Does anyone have an idea how to solve this problem?

  Thanks for the comments.  It's good to hear that you have actually solved the problem.

• XP mode does not work in Windows 7 Professional

  I downloaded the program suitable for XP Mode in my upgrade to Windows 7 Professional

  but then the XP program does not appear in my menu start programs. I followed all the

  indications that it microsoft Web site. Any suggestions?

  My reason for the purchase of upgrade to Windows 7 Professional must have XP option

  Since I have an old set of Works Suite 2004 whioch has 2003 word in there that I preffer

  and I prefer XP on Vista and Windows 7.

  Mike Dunn, Paralegal Associates

  There are two programs, you must install:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  In addition, click Start, type: enable or disable windows features

  Press enter on your keyboard

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot your system when prompted.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Warcraft III does not install on Windows 7 32 bit

  I try to install Warcraft III, and whenever I try to start the installer, nothing happens. I tried to run in each mode of compatibility as administrator, and nothing happens.

  I downloaded Virtual PC and XP Mode for it and tried to install it on that, and I get the error "The Application could not initialize properly (0xc0000005)" when I try to run the installer. I have to click OK twice until the message disappears.

  The program has never been on this computer, I'm not trying to reinstall, I want to put it here.

  Any ideas at all?

  Hello Ligress.

  I only came across problems using Warcraft 3 on 64-bit.  However, I use the downloadable version, not the version out of the original disc.  If you have a Battle.net account, you can enter your Warcraft 3 CD key and you will be able to download it directly from Blizzard.  It may contain a newer version of the installer that works.

  It won't work on a virtual PC because it requires 3D hardware acceleration. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Logitech clicsmart 310 does not install on Windows 7

  Original title: logitech clicsmart 310

  I tried to install the required software for that camera, but I couldn't get the camera does not respond.

  I recently installed win 7, but I couldn't install it

  Hello

  1. You receive a code error message when you try to install the software of Logitech camera 310 clicsmart?
  2. Exactly how you try to install the drivers (CD/DVD or download)?

  From my research and the information provided on the site of the manufacturer (Logitech), the software available for the camera is not compatible with Windows 7.

  The driver software is available for Windows XP, Windows 2000, Windows ME and Windows 98

  I recommend to install the camera in Windows XP compatibility mode driver.

  Follow the steps below to do the same.

  Step 1:

  Download the drivers from the manufacturer website link provided below.

  http://www.Logitech.com/en-CA/support/3402?OSID=14&bit=32

  Note: Select Windows XP from the operating system drop-down and download the drivers.

  Step 2:

  Once download you the drivers, install them in compatibility mode.

  Some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try changing the compatibility of the program settings, either manually or by using the program compatibility problems.

  Refer to the provided article below for more information on how to run a program in Windows 7 compatibility mode.

  Make older programs in this version of Windows

  We know the State of the question.

• WAMP Server installs but does not work on Windows 7 Professional. Why?

  To prepare my computer for Web construction and necessary for installing Wamp Server.  Installed, it does not run.  the office bar icon don't change from pink to green.

  Since your message clearly has nothing to do with your comments on the web site of Microsoft Answers, I left it the Feedback forum on the forum of "Programs" of Windows 7.

  If you have problems with wamp, you do not ask the wamp forums would be more productive?  http://Forum.wampserver.com/list.php?2

• C7280 does not install on windows 7 x 64 using the latest drivers - reports 0 available megabytes

  using PS_AIO_02_Net_Full_Win_WW_130_140.exe, (1/1, 311.96 M) out the 2009-10-20 (version 13.1.0), installing signals that I have no disk space, whereas in fact my windows system drive (B has more than 100 GB of free.)  Here is the full text of the error:
   
   
  This computer does not meet the minimum requirement for disk space available system. The
  installation cannot continue until this is resolved.
   
  Current value: 0 MB
   
  Required: 114 megabtes
   
  recommended: 114 MB
   
  Action required: click on the 'Help' button below to open the windows, disk space clean Assistant. After
  you have finish cleaning disc, select 'Retry' to complete the installation.
   
  Needless to say that running windows disk cleanup remain without effect.  I'm guessing that the installer is hardcoded to wait for the system drive to C: (which happens to hold my partition vista...)  Help.  TIA.
   
  Andrew
   
   

  Click the button cancel while now the keys Ctrl + Shift. You may need to do this several times before the installation takes place.

• Creative cloud app does not install on windows 10

  Bought a new computer laptop and tried several times to install the soft CC in order to install and use my CC account and install PS, ID, LR etc.

  It does not give me a real error, Setup starts very well and then 4 seconds it stops and disappears without any error.  I went online and followed most of the troubleshooting tips as turning off my firewall and anti-virus, rebooted, signed in and out and nothing works.  Tried 10 times and frustrated.  I have cleaned the registry with utility program and can not think what to try.  All other computers work fine with CC 2015.  I've never had this problem before.  Someone help with the problem of thi.s?  All the evil always seems to occur the weekend without tech support

  Mac or Windows and exactly what version of the operating system?

• DeskJet 3000 J310: Driver for HP DeskJet 3000 J310 does not install on Windows 10

  We have a home network that has our 3000 DeskJet installed and available as a network printer device.  I can print is no longer after the upgrade to Windows 10 on my Lenovo ThinkPad.  I downloaded the full features and software for the DeskJet 3000 several times and restarted my computer Windows 10.  I also ran the doctor print and scan.  I finally found a message that the software and the driver would not install, but I can't understand why.  The DeskJet 3000 is listed as a printer, when I look at printers and Scanners in devices in the settings on my laptop, but the message is that driver is not available.  I am at a loss to know what to do next to resolve this problem.  My husband is still able to print using his office computer that is running an earlier version of Windows.  Any suggestions would be greatly appreciated.

  Hello @linda51!

  Thanks for posting on the HP Forums!

  I see that after updating to Windows 10 you lost printing wireless Deskjet 3000.  I should be able to provide a few suggestions that may fix the problem.  I know that you have reinstalled several times without success.  I'm going to recommend that uninstall you the HP software, one more.   Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.

  To uninstall the HP software, click here: uninstall the HP software

  To perform a disk cleanup, click here: perform a disk cleanup (the link is for Windows 8.1 but the same steps for 10)

  To download the HP software, click here: HP Deskjet full feature software and drivers

  How do you have the printer connected to the computer?  If the printer is connected wireless, then it is possible that a firewall in the Windows operating system has been turned on and is now blocking of scanning.  I recommend to download HP Print and Scan doctor.  With printing and scanning doctor, you can temporarily disable the firewall that may block the printer from the computer.  If the printer is found, you need to turn your firewall on back to make sure that your computer is blocked.

  To download the print and the doctor Scan click here: print and Scan Doctor

  To temporarily turn off the firewall:

  1. Download and open the Print and Scan Doctor
  2. Click on 'Network' at the top of the window
  3. Click on 'firewall troubleshooting. "
  4. Select the firewall and disable

  Launch the software HP again to see if the printer is located.  If the printer is not found, then you want to communicate with your provider of firewall while allowing access to the printer to the computer.

  

  To turn on the firewall:

  1. Open the print and Scan Doctor
  2. Click on 'Network' at the top of the window
  3. Click on 'firewall troubleshooting. "
  4. Select the firewall and select

  If please, after back and let me know how it goes!

• 5.1 surround Sound speaker system does not work in Windows 7 Professional 64-bit edition

  My problem is about the same as other users who cannot get their surround sound speaker system to work properly in Windows 7.

  I have a subwoofer and 5 speakers (2 front, 2 rear, 1 for the centre).  Connection to the RealTek HD Audio embedded is simple, orange for the subwoofer, green for the front and black for the rear.

  Test the sound in Control Panel-> windows sound produces a sound on all channels and RealTek HD Audio Manager at the same time, which is the desired configuration.

  However, different applications use different channels.  IE and Firefox use the front channels, VLC/MediaPlayer uses the back.  3D games (that is to say WoW) through all channels.  In each case the subwoofer does not work.

  I tried to download the latest drivers on the motherboard (Gigabyte) manufacturers site.  I even tried the supplied RealTek drivers (even if on the Web from RealTek site which is NOT recommended).  I tried to connect the connectors of the subwoofer to the different takes (reversed black and green).

  I have experimented with the settings in RealTek HD Audio Manager and control panel-> windows Sound.  Nothing works.

  These exact same subwoofer and speakers worked perfectly well on Windows XP.

  I have 2 questions:

  one) has anyone resolved their 5.1 & Windows 7 problem something that I have not yet tried?

  (b) when will Microsoft take this issue seriously?  All Microsoft provided answers just repeat what everyone

  has already tried.

  First disconnect the cable 3 (orange, green and black) then click on Control Panel configuration-hardware and sound - Real tek HD audio manager - central tick, subwoofer and rear pair, front left and right and filling of speaker

  Then click on advance device settings.

  Select "perform front and reading of output devices back two different audio streams simultaneously" and give ok

  Plug all three pins one by one and select the appropriate option in the popup windows.

  That's all.

  You give enough information for me to get this working.   My system runs Win 7 X 64 Home Premium.   When I select 5.1 sound capacity side my 550 x Logitech speakers are not recognized.  If I select 7.1, which is the capacity of my chip Realtek chipset, I can get the two outside are activated as a "rear" speakers and can push the test tones to each of the four surrounding speakers and the combination of Center/bass via the Realtek driver.

  Regarding the "front and reading of output devices back two different audio streams at the same time" worries... I can't find this option.  There are at least two suppliers of 'control of the interfaces' assets on my system.  One is provided by RealTek, the other by Microsoft.  The access roads to these interfaces is roundabout and confusing, to say the least.

  Some compromises are in order in my humble OPINION.  I have my Pandora one stream play in an acceptable way in my small study.  Many of the source of sounds streamed to me are recorded in stereo or mono, I find myself hitting the 'matrix' on my Logitech X 550 button quite frequently.  Sometimes a more recent piece is delivered which actually looks Ok without the decoder "matrix".

  What I would really like to be able to do is to "reconfigure on the fly" between the built in speakers on my Acer Z3731 system USB bar ' All in One ' and my external Logitech X 550 popular with the ability for the presentation of "5.1 surround sound" through three sons.  When I try your procedure, I don't get separate recognition of each thread, as it is trendy and often end up with its 2.1 being eliminated in my 5.1 speakers, because somehow Microsoft has re-recognized the built-in USB port based his bar instead of the three rear wires plugged into the outlets provided by the manufacturer of the system.

  If there was ever separate 'Speakers' and 'Realtek' icons in the UI on my system, speakers are long gone and I can't get back them.  All I see is the Realtek driver.  I would like to see the two icons 'Speakers' different, I could mark "integrated 2.1" and "5.1 external '", in addition to the driver Realtek.»  How can I get these to reappear?

  Can anyone suggest a way to have two different sets of "speakers" recognized and identified in the Microsoft UI in addition to the Realtek driver?  If I could get because of this, I think that the driver would let me 'set as default' one or the other speaker set, and I 'software switching' capable of letting me choose the external speakers or integrated sound bar offers the sound.