vSAN mini Dell H730 after update02 health

Similar Questions

• How to install xp on a mini dell with ubuntu? __

  How to install xp on a mini dell with ubuntu?

  http://www.Google.com/webhp?hl=en#hl=en&q=how+to+install+XP+on+Dell+mini+with+Ubuntu&AQ=f&AQI=&AQ=f&AQI=&OQ=&FP=2755c6b3e9b2e9 MS - MVP - Elephant Boy computers - don't panic!

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• How can I get mini rear deck after the update to PS CC 2015?

  How can I get mini rear deck after the update to PS CC 2015?

  You can not. Mini Bridge used Flash and Flash is no longer supported in Photoshop.

• Mac mini black screen after upgrading to sierra

  Hello!

  My probleme:Mac Mini end 2014 black screen to start immediately after the upgrade of Sierra.

  Thanks for your help.

  Kentr0n

  Is there anything on the black screen (boot) at all ever?

• My iPad 2 Mini is frozen after put 9.3.1 update

  How can I restart my iPad Mini 2 after it completely closed after IOS 9.3.1 update >

  Force the restart (does not affect the settings/data/music/apps/etc)

  1. press and hold the sleep/wake button

  2. press and hold the Home button

  3. hold both buttons until the screen turns off, then back on with the Apple logo.

• Satellite click on Mini - some problems after installing Win 10

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Posted by bilou24an199
  

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Wow the GUY you described exactly the same problem as me...
  If anyone can help that would be great.

• HP Mini 110-3000: after formatting wifi network icon missing

  Dear Sir.

  I have HP Mini 110-3000. As there is problem in my original preloaded operating system so I formatted and installed windows 7 ultimate 64 bit operating system.

  After formatting, find it me impossible to see the wireless network icon in my tray instead it is another icon that is used to connect to the internet using a LAN cable.

  What is the problem?

  Hello:

  Go to Device Manager and look at the list of devices it.

  Is there a device listed in the Device Manager, labeled as a network controller?

  If so, this is the wireless card that need to install the driver.

  If you don't know which driver you need for the wireless card, please report it to the listed hardware ID of the device that you see as a network controller.

  To find the hardware ID, click the network controller device.

  Then click on the Details tab in the upper part of the window network controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd item (Hardware ID).

  After the first string of characters you see in the window.

• Mid-2007 Mac Mini Dell UltraSharp U3415W?

  I have an old Mac Mini that I was unable to connect to my new monitor.   I am able to display the mini to my TV (using the old VGA adapter supplied in the box with the Mini connected to a VGA input on the television).  I also tested the Mini on a VGA monitor (at the Apple store genius bar) and it worked.

  However, it doesn't give me video when I connect it to my Dell monitor with a mini Display Port DVI cable.  See below for the plug.  What is the cable?  The Mini?  Ideas?

  Display Port DVI cable: http://www.amazon.com/gp/product/B00DJCB83O?psc=1&redirect=true&ref_=oh_aui_sear ch_detailpage (seems to be DVI - D)

  Reference Dell monitor connectivity Specs:

  1 HDMI connector (vr2.0)

  1 connector MHL

  1 mini DisplayPort

  1 DisplayPort (version 1.2)

  1 DisplayPort of the Rockies (MST)

  1 audio Line out5

  4 ports USB 3.0 - downstream (4 back)

  2 ports USB 3.0 - upstream

  Mini Video/Display features:

  Graphics card: Intel GMA 950 VRAM Type: integrated

  Standard VRAM: 64 MB of VRAM maximum: 64 MB

  Display stand: Simple Support for screen resolution: 1920 x 1200

  Details: The video output DVI compatible digital resolutions up to 1920 x 1200. Apple also reports that it supports the "Apple Cinema display 20-inch and 23-inch Apple Cinema HD display; support coherent digital displays up to 154 MHz; non-coherente digital media displays up to 135 MHz."VGA output (using the supplied adapter) supports analog resolutions up to 1920 x 1080. Composite video and S-Video (to connect to a projector or TV) requires the Apple DVI adapter (sold separately) video.

  Is your adoptive parent for DP > DVI, DVI not > DP.

  The cable is not bidirectional.

  You need a converter as

  o http://www.StarTech.com/AV/Converters/Video/DVI-to-DisplayPort-adapter-with-Audi ~ DVI2DPA

  not cheap

• How can I fix mini slow mac after memory upgrade from 4 GB to 16 GB

  I have a Mac Mini (ver 6.2 end 2012, i7 to 2.3 GHz, OS X 10.10.5) that I just put new memory to upgrade to 4 GB 15 GB (Crucial 16 GB = 8GBx2 kit corresponding blades plug their scanner software and HW Apple specs). I use HDMI to my Vizio 32 inch HDTV and now my Mac runs slower for typing, clicks, etc, but the software seems to work fime. I have checjed the "about this Mac" and it shows the memory is available and authorized to use. I also run app "Cleaner" memory and it shows the total memory available and currently in use.

  Then what should I do to solve the slow?

  Thank you in advance fr that all help someone of you provide.

  Ron/Nightstyles

  I run a mini end 2012 with 16 GB.  It's fast... I also have SSD which also provides the spectacular for startup performance improvement and any disk activity.

  Have you checked for any process out of control by using the activity monitor?

  https://discussions.Apple.com/message/20379601#20379601#20379601

  Have you reset the NVRAM and SMC memory since installing the RAM?

  Restart and hold down the command-Option-P-R keys immediately after you hear the startup sound.

  How to reset the NVRAM on your Mac - Apple Support

  To reset the SMC?

  Basically the kindly stop and turn off the power for 10 to 20 seconds.

  Reset the management system (SCM) controller on your Mac - Apple Support

  After resetting these go check the keyboard settings in system preferences...

• Problem of HP Mini 110-355 after installing win xp

  Hi every1!

  hope someone could help me soon...

  I have 110-3500 mini hp win 7 (bones included) I have a mini internet shop

  I was able to install win xp (on USB) on my loptop since some of my necessary habit of the software work on win 7.

  but the problems are.

  (1) optical mouse usb does not work! He says: "cannot install, peripheral is dsabled" he keeps saying it, even after activation of the device said on Device Manager and the Device Manager, under HID class, there is an unknown device:

  and: (2) my wifi and and bluetooth does not work (the two are also in the same switch)

  I downloaded and installed any necessary drivers form net but only that both do not work.

  hope to hear any response soon... thank you so mch...

  Hello:

  Please see if the chipset driver helps with this unknown device.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-89844-1&CC=US&DLC=en&LC=en&os=228&Product=4346351&sw_lang=

  I don't know why your network cards do not work if you have the drivers installed for them.

  Try the latest driver for network card for XP...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-101092-1&mode=3

  Try this driver package and the bluetooth software...

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=5169094&prodSeriesId=5071191&prodNameId=5071193&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-92064-1

  Paul

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done

• I bought a laptop mini dell who doesn't have a cd/dvd drive and would like to get my photos from my camera on it.

  Computer: Dell Inspiron mini 910

  Camera: Vivitar ViviCam X 024 digital camera

  Program: Vivitar experience Image Manager software

  I've tried connecting the camera to the computer, downloading the software directly from vivitar.com (invalid email supposedly), control panel addition and the removal of the cameras (not on the list of cameras), ect... I am now at a loss what to try next so if someone can help it would be greatly appreciated.

  The camera uses media that can be deleted?  If so, download a USB drive for this type of media nd it allows to read the media when you remove it from the camera.

  Regarding the "no CD/DVD drive" - If you really think you want - buy one - USB external.

  If you have a ViviCam X 024 and looking at technical specifications and web Vivitar support page you can see the Manual of the camera that shows what you can / should use a SD memory card.  With a decent USB drive for the type of card, you should be able to remove it and read it as any external USB drive.

  Well, to tell you the truth, however, the manual (page 48) makes it sound like the camera is - somehow - just a SD card reader.

  Transfer media from my camera to my computer manually (using Windows)

  1. use the USB cable that came with your camera to connect your device to your computer.
  2. a window appears with a list of options, select open folder to view files, and click OK.
  3. open the DCIM folder and the folder to view multimedia files.
  4. Select support and copy the files in this folder to your computer. Optionally, select the files and choose copy from the Edit menu. Select a folder, then choose Paste from the Edit menu.
  5. We recommend that you copy the images in the photos / folder my pictures and videos in the videos / folder my videos.
  6. do not disconnect the cable during transfer. This will cancel the file transfer on their way to your computer.

  You are keen on the CD/DVD drive for installation of some software?  You could make the CD in ISO image and install a program that would go the ISO image on your mini.  Or better yet, ise some external USB device connected to another computer to copy the contents of the CD to a folder on the said device and then transfer it to the mini.

• Compact disk flash not recognized on Dell Inspiron after updated to Vista SP - 2

  After the Vista Service Pack 2 update, my system does not recognize my compact flash drive when it is inserted in the Player embedded on my dell Inspiron. It worked before the upgrade. I checked the drive and it's working properly.

  read my disc compact flash.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Mini 1000: password after you hit F10

  Hi, I need password for hp mini 1000 after hit F10 at startup.

  System of the fatal error message...

  CNU9263Z5N

  Thank you.

  @resnickm

  Enter: e9lo7gf0q9 (3rd character is a lowercase L and the 8th sucks)

  Kind regards

  DP - K