vSphere update your distributed switch 5.1 to 5.5

Similar Questions

• vSphere Distributed Switch 5.5 traffic filtering and tagging

  Someone had a chance to create a script to update the traffic filtering and marking of area of a group of ports on a vSphere 5.5 Distributed Switch? The settings are only exposed in the web client for Onyx is not an option.

  I need to create a rule with the values below.

  Traffic Filterig and marking:

  Set State enabled

  New rule of network traffic

  Name: name of the traffic rule

  Action: Tag

  CoS value: tag value Update CoS: 4

  Qualifiers of traffic:

  Traffic management: evacuation

  New qualifying traffic system: vMotion

  This is as much as I can get.

  $VDSPortGroup = get-VDSwitch Test - dvSwitch | Get-VDPortGroup Test-PG

  $Spec = new-Object VMware.Vim.DVPortgroupConfigSpec

  $Spec.configVersion = $VDSPortGroup.ExtensionData.Config.ConfigVersion

  $Spec.defaultPortConfig = new-Object VMware.Vim.VMwareDVSPortSetting

  $Spec.defaultPortConfig.FilterPolicy = new-Object VMware.Vim.DvsFilterPolicy

  Sorry, it took a little longer than expected.

  Try like this

  $dvSwName = "dvSw1".

  $dvPgNames = "dvPg1".

  $dvSw = get-VDSwitch-name $dvSwName

  # Activate LBT

  foreach ($pg in (Get-View-Id $dvSw.ExtensionData.Portgroup |)) Where {$dvPgNames - contains $_.} {Name}))

  $spec = new-Object VMware.Vim.DVPortgroupConfigSpec

  $spec. ConfigVersion = $pg. Config.ConfigVersion

  $spec. DefaultPortConfig = New-Object VMware.Vim.VMwareDVSPortSetting

  $spec. DefaultPortConfig.FilterPolicy = New-Object VMware.Vim.DvsFilterPolicy

  $filter = new-Object VMware.Vim.DvsTrafficFilterConfig

  $filter. Nom_agent = "dvfilter-credits-vmware.

  $ruleSet = new-Object VMware.Vim.DvsTrafficRuleset

  $ruleSet.Enabled = $true

  $rule = new-Object VMware.Vim.DvsTrafficRule

  $rule. Description = "name of traffic rule".

  $rule. Direction = "outgoingPackets."

  $action = new-Object VMware.Vim.DvsUpdateTagNetworkRuleAction

  $action. QosTag = 4

  $rule. Action += $action

  $ruleSet.Rules += $rule

  $filter. TrafficRuleSet += $ruleSet

  $spec. DefaultPortConfig.FilterPolicy.FilterConfig += $filter

  $pg. ReconfigureDVPortgroup ($spec)

  }

• vNetwork Distributed Switch use case?

  Hi, I understand what a vNetwork Distributed Switch is, but I'm not sure if I know that all use cases.    Is used only so that you don't have to create the same exchanges on each server in the cluster for Vmotion?  Or are there other reasons?   Why switch dist. vN would be a reason to between ORL more?

  Thanks for your help.

  This video might also be useful:

  http://www.hypervizor.com/2009/10/vSphere-40-vNetwork-distributed-switch-VDS-video-demonstration-architecture-diagram/

  StarWind Software R & D

  http://www.starwindsoftware.com

• vSphere Distributed Switch

  Hi, I recently updated my vcenter of 5.1 to 5.5 but my vSphere Distributed Switch (VDS) is always version 5.1. Now, I have to create another VDS is it compatible with the vcenter 5.5 or do I need to update my

  VDS from 5.1 to 5.5

  Hello

  Please check the link for vDS below set to level.

  https://pubs.VMware.com/vSphere-55/index.jsp?topic=%2Fcom.VMware.vSphere.networking.doc%2FGUID-330A0689-574A-4589-9462-14CA03F3F2F4.html

  In brief

  You must have first the vCenter to 5.5

  Then, ESXi 5.5 using the vDS

  Then you can upgrade vDS on the fly.

  Suhas

• Error HTTP 500 HOL - vSphere Distributed Switch from A to Z-

  It seems that there are problems with the "vSphere Distributed Switch from A to Z" HOL.  I get the following error message when you try to access the laboratory (see screen capture below).  Other labs are working fine for me.  I tried to access this laboratory of 5 different computers with the same results.

  There was a communication error with the server. Try again in: 26

  Message: HTTP 500 Code

  

  Any help would be appreciated.

  Try the testdrive tenant.

  He seemed to do a pod stuck in the queue of our deployment for the testdrive tenant. That may have caused this problem.

  -Doug

• Can I create with vSphere Enterprise Edition distributed vNetwork distributed switch?

  From the following URL, I wonder whether we can create vNetwork distributed switch with our existing Enterprise Edition.

  http://www.VMware.com/products/vSphere/buy/editions_comparison.html

  If the answer is YES, could any elaborate colleague on "Enabler for 3rd party switch support?  Currently, we use DELL switches.

  Thank you

  as said Enterprise Plus license is necessary for a vNetwork Distributed Switch.  You can create one under Enterprise license, but don't be fooled, you can not use.

  Maybe VMware one day will remove the ability to create even one based on the license model.

• VSphere of VMware vNetwork Distributed Switch

  I'm a bit confused on VMware vNetwork Distributed Switch and Nexus1000. I'm in 4.1

  my understanding is that Nexus 1000 is an improved version of the vDS and they have different licenses.

  vDS is available in the enterprise and Nexus is available only in Enterprise Plus. Am I wrong?

  The licensing model was different in 4.0?

  NO.

  Sent from my Verizon Wireless Phone

• 'upgrade' control of Distributed Switch for network IO / LACP improvements via PowerCLI?

  vSphere 6.0.  PowerCLI 6.0 R1.

  
  

  After using the New-VDSwitch PowerCLI command, I noticed that the Web Client vSphere shows there are "updates available" to the distributed switch resulting.

  
  

  I know that I can right-click on the distributed switch and select upgrade in the Web Client.

  
  

  Someone knows how can I perform the upgrade using PowerCLI?

  

  search terms: nioc

  Here is the code I ended up with yesterday before reading your response... is it ok for you?

  Also, is it OK to use 'ReconfigureDvs' instead of 'ReconfigureDvs_Task '?

  PS how do you get syntax colorization of your code PowerCLI?

  $myvDS = news-VDSwitch-Verbose - name $myvDSwitchName - location $myNetFolder - NumUplinkPorts 2

  # Upgrading capacity DSwitch "NIOC v3" and "Enhanced LACP Support.

  $spec = new-Object VMware.Vim.VMwareDVSConfigSpec

  $spec.networkResourceControlVersion = 'version 3 '.

  $spec.lacpApiVersion = "multipleLag".

  $spec.configVersion = $myvDS.ExtensionData.config.configVersion

  $myvDS.ExtensionData.ReconfigureDvs ($spec)

  # Activate the NIOC

  $myvDS.ExtensionData.EnableNetworkResourceManagement ($true)

  # Extract our object to collect the current configuration

  $myvDS = get-VDSwitch $myvDS

• question of vCenter edition license + distributed switch

  Hello

  I want to clarifiy on vCenter license I have and what is it supposed to cover.

  Background:

  I bought the VI3 VirtualCenter license company a year ago. I upgraded the server vCenter vSphere4 a few weeks ago, and apply the code key that I found in my account on VMware.com. Up to present, so good, but he says my license VI3 VC has been converted with vSphere Standard.

  The ESX servers are 4.0 enterprise.

  -In looking at vsphere_pricing.pdf it seems now I have many features available, they are offered as advanced or Enterprise editions.

  In the table below, I did few features "BOLD" I see clearly available and who are supposed to be higher than the standard packages.

  Thus my confusion is - what license actually did I? Standard, as it says in the vCenter or higher license tab since obviously there are available features, which should not be in the standard?

  vSphere Standard includes: • VMware ESXi and VMware ESX (choice of the time of the deployment) 2 • VMware vStorage VMFS • Four-way virtual SMP • VMware vCenter Server Agent • VMware vStorage API / VMware Consolidated Backup (VCB) • VMware vCenter Update Manager • VMware HA • VMware vStorage Thin Provisioning

  vSphere Advanced includes: • VMware ESXi and VMware ESX (choice of the time of the deployment) • VMware vStorage VMFS • Four-way virtual SMP • VMware vCenter Server Agent • VMware vStorage API / VMware Consolidated Backup (VCB) • VMware vCenter Update Manager • VMware High Availability (HA) • VMware vStorage Thin Provisioning • VMware VMotion • VMware hot add • VMware Fault Tolerance

  • VMware Data Recovery

  • VMware vShield Zones

  vSphere Enterprise includes:

  • VMware ESXi and VMware ESX (choice of the time of the deployment)

  • VMware vStorage VMFS

  • Four-way virtual SMP

  • VMware vCenter Server Agent

  • VMware vStorage API / VCB

  • VMware vCenter Update Manager

  * • VMware HA *.

  • VMware vStorage Thin Provisioning

  • VMware VMotion

  • VMware hot add

  • VMware Fault Tolerance

  • VMware Data Recovery

  • VMware vShield Zones

  * • VMware Storage VMotion *.

  • VMware DRS

  • VMware DPM

  vSphere Enterprise Plus includes:

  • VMware ESXi and VMware ESX (choice of the time of the deployment)

  • VMware vStorage VMFS

  • Eight-way virtual SMP

  • VMware vCenter Server Agent

  • VMware vStorage API / VCB

  • VMware vCenter Update Manager

  * • VMware HA *.

  • VMware vStorage Thin Provisioning

  • VMware VMotion

  • VMware hot add

  • VMware Fault Tolerance

  • VMware Data Recovery

  • VMware vShield Zones

  • VMware Storage VMotion

  • VMware DRS

  • VMware DPM

  • VMware vNetwork Distributed Switch

  • VMware Host Profiles

  Now the 2nd question (maybe I should have separated these, but I feel somehow it can be bound to the first)-when I create a distributed switch, the tab "hosts" is empty. I right click and select "add the host to the virtual switch distributed", but even once it gives me a window with no host has chosen.

  Is a licensing issue or config problem?

  If you have company VI3 then he improved to vSphere Enterprise.  And according to the characteristics you describe below, it looks like Enterprise license, that's what is activated in vCenter.  If you click on licenses in vCenter (Home\Administration\Licensing), see your Enterprise vSphere licenses?

  Regarding distributed switches, this option is available in vSphere Enterprise Plus then you will not be able to use. If you need the functionality of Enterprise Plus there is a promotion running until December 15, which allows you to update your enterprise license to Enterprise Plus licenses for a significant discount.  You should talk with your dealer on this subject if you are interested...

• standard of distributed switch migration oddities

  I have recently updated our laboratory to vsphere 5 and then switches distributed, after the migration of VM networks I noticed two machines still show an idle connection to the old standard switch this switch and portgroup be deleted on all host servers:

  

  I tried to remove the network card and it time on the removing of the inventory, virtual machine and re-adding it... any ideas on how to get rid of this?

  Usually, it shows if the virtual machine has a snapshot, which was connected to the Group of 'old' port

  André

• How can I change the name of vNetwork Distributed Switch?

  vNetwork Distributed Switch name is Test iSCSC. But the esxcfg command recognizes not (single Test). So how can change it to other as test what esxcfg pouvez know or remove the vDS?

  Thank you!

  George

  You can unlink the vmnic of the vDS?

  for example

  esxcfg-vswitch -Q vmnic0 -V  
  

  You should be able to identify the dvPort using esxcfg-vswitch - l, if your dvSwitch has spaces in the name, use quotes around the name of the dvSwitch.

  There is also a pattern of recovery procedure in the documentation of vDS, you can go there if you deleted accidentally networking of your Service Console.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP4-DCA

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Cannot add the host to the distributed switch

  Hello

  Updated some time a go to vSphere.  Environment has 2 hosts and I left it with standard switches.  Today, I thought I'll add a distributed switch and use the extra features etc.  I added the switch d however when I come to add a host it there are none listed?  Can someone tell me how do I migrate from standard to distributed please?

  Kind regards

  Stuart.

  First of all. Do you have an Enterprise Plus license? Distributed virtual switches not working Enterpise more licenses or if you are using the Evaluation Version.

  Secondly, you have all available vmnic? unless a computer host a vmnic unused, the hosts will display not.

• How to remove ESXi host of Distributed Switch

  3 Cluster DRS - 1 x physical, 2 nested nodes in a LAB environment

  I need to downgrade a 6.0 U2 ESXi host and replace it (from ESXi nested in Physics). I am trying to remove the host from a distributed switch, but it seems that I can't do that until I remove it from the Distributed Switch. I can't remove the VMkernel group management ports that prevents me to remove the host from the Distributed Switch. Any suggestions? I guess that I need that migrate to a Standard switch first?

  I am connected to the ESXi host through vSphere Client, migrated the group management to a Standard switch ports, then I was able to clear the host of the distributed switch. I could then remove the host from the Cluster.

• Distributed switch

  Assuming that the new host that is added to the existing cluster is the same server, I have a question:

  If the cluster is using distributed switch, how to set up the new host to use the existing configuration of distributed switch?

  Once the host and the network/uplinks are correctly configured, simply follow steps shon in Add hosts in a Distributed Switch vSphere

  André

• Management on a distributed switch network

  Hey guys,.

  I have a noob question - is there a problem given the management network for a distributed switch?
  Someone has said that if I lose the vCenter for some reason, I won't be able to connect to hosts. It seems logical, but I'm not sure that's true.

  
  Thank you!

  vCenter server unavailability will not stop manage you your ESXi host directly if you have migrated vmk management service VDS.

  worst case, you have an option under Network Restore Options in DCUI from host to migrate vmk management back to vs.