"VSphereVCNSInventory" workflow failed

Similar Questions

• Workflow fails on the wait Timer

  I have a created workflow that generates a snapshot of a VM, notifies the user by e-mail that the snapshot was created, and then going into a timer waiting for a period of 2 weeks before checking if the snapshot still exists and to notify the user that they must remove the snapshot. So buckle up every day notify the user that the snapshot should be removed until the snapshot no longer exists.

  For most of the time, the workflow works as expected, however, I find that one or two workflow running fails from time to time. The schema of the execution of workflow shows workflow failed on the timer standby (which I checked has a valid date/time value assigned to the input of energy). When I view the events for the workflow, it has 3 events, Workflow has started, workflow is suspended and Workflow failed. When you select the workflow does not event, the description is "Workflow has been issued by a task, the workflow runtime does not be resumed" (I guess that 'being' = 'summer' in the message). In addition, when the workflow fails, it never runs the exception workflow that is configured to send me an email notification with the information of errors/exceptions.

  Does anyone have ideas, what could be causing this failure? I noticed that the failure occurs most often after that the Orchestrator function has been restarted.

  Hello

  In fact, the behavior you observe is not random and should somehow. Currently all the workflows that are opened by an i.e., scheduled task are not included on the reboot of the server. The centre of the spot is responsible. The reason is that it could happen that such a workflow can be started at the same time to resume from the point it was suspended and centre/Task Manager. So, if the workflow should he resume the server restarts.
  Other hand the reboot of the server, the Task Manager will hold the following logic:
  1.1 if it is a recurrent task task manager will calculate the next execution time and is scheduled to run.
  1.2 If the task is not recurrent, i.e. it is a one time task there are two options:
  1.2.1 the execution time is not spent - then the task is scheduled for execution.
  1.2.2 the execution time already - spent, we will in two other options:
  1.2.2.1 the task has been configured on "Start if scheduled in the past" and has not yet been completed - the task is scheduled to run once.
  1.2.2.2 the task has been configured for "do not start if scheduled in the past ', or is already completed - the task ends with error and the workflow will not be executed.
     
  I guess in your case, the workflow is scheduled (started from a task) and that's why he is unable to return to restart the server. If the workflow is not recurring to work around the problem, you can configure the task scheduled as "Start" If in the past You can do this with access from the client to the Scheduler->-> Edit (photo attached). This will lead to the execution of the workflow from the beginning on the reboot of the server if the workflow has already been launched but was not complete or suspended in the middle.

  
  Kind regards
  Radostin

• How to set up notifications when the workflow fails?

  Hi all
  
  new to this, so please help.
  
  I want to receive notifications when a workflow fails for some reason any.
  
  I use R12 (12.0.4) on linux.
  
  Is it possible to configure this through OAM maybe.
  
  Thanks in advance.

  Hello

  When an error occurs in a workflow, usually a notification will be sent to SYSADMIN. So, yo need to log into that account to access workflow errors. If you want to confirm, for a given workflow, how it handles errors, you can open it with the workflow designer and discover who is the error process used (go through the workflow process > click right mouse > properties > Details tab > point error Type and error process). You can then open this workflow error and check who is the recipient of the notification. I hope it helps.

  Kind regards.

• Add Standalone workflow fails...

  I'm clearly missing something in what concerns the use Orchestrator and hope I can a little nudge in the right direction.

  I tried to add a stand-alone ESXi 4.1 host to vCenter Server. The workflow for adding a stand-alone host (Workflows > vCenter > host management > recording > Add standalone host) fails everytime I try to use it. The error message I see is:

  "AddStandaloneHost_Task" task error: the authenticity of the host SSL certificate is not verified. (Name of the dynamic Script Module: vim3WaitTaskEnd #20)

  I can't find out where to install the host SSL certificate. This error refers to the vCenter Server SSL certificate or the ESXi host SSL certificate?

  Thank you, in advance, for your help.

  =======================================

  Here's my vCO log file:

  (com.vmware.library.vc.basic/vim3WaitTaskEnd) "AddStandaloneHost_Task" task error: the authenticity of the host SSL certificate is not verified. (Name of the dynamic Script Module: vim3WaitTaskEnd #20)
  Connection with the key pair (.. / server/vmo/conf/vco_key)
  Cannot run command InternalError: identity file not found! (Workflow: run SSH command / command run SSH (item6) #14) (Workflow: run SSH command / command run SSH (item6) #31)
  Login with password
  Cannot run command InternalError: Auth fail (Workflow: run SSH command / command run SSH (item6) #14) (Workflow: run SSH command / command run SSH (item6) #31)
  (com.vmware.library.vc.basic/vim3WaitTaskEnd) "AddStandaloneHost_Task" task error: the authenticity of the host SSL certificate is not verified. (Name of the dynamic Script Module: vim3WaitTaskEnd #20)
  Login with password
  Cannot run command InternalError: java.net.ConnectException: Connection refused: connect (Workflow: run SSH command / command run SSH (item6) #14) (Workflow: run SSH command / run SSH Command (item6) #31)
  (com.vmware.library.ssh/registerVSOonHost) Registration of public key VS - O on ' 172.20.10.51' for the user 'root' failed. InternalError: java.net.ConnectException: connection refused: connect (name of the dynamic Script Module: registerVSOonHost #5) (name of the dynamic Script Module: registerVSOonHost #30)
  (com.vmware.library.ssh/registerVSOonHost) Registration of public key VS - O on ' 172.20.10.51' for the user 'root' failed. InternalError: Auth fail (name of the dynamic Script Module: registerVSOonHost #5) (name of the dynamic Script Module: registerVSOonHost #30)
  (com.vmware.library.ssh/registerVSOonHost) Registration of public key VS - O on ' 172.20.10.52' for the user 'root' failed. InternalError: java.net.ConnectException: connection refused: connect (name of the dynamic Script Module: registerVSOonHost #5) (name of the dynamic Script Module: registerVSOonHost #30)
  (com.vmware.library.ssh/registerVSOonHost) Registration of public key VS - O on ' 172.20.10.52' for the user 'root' failed. InternalError: Auth fail (name of the dynamic Script Module: registerVSOonHost #5) (name of the dynamic Script Module: registerVSOonHost #30)
  Login with password
  Connected!
  Execution of 'uptime '.
  Output: ' 04:27:11 up to 12 min, load average: 0.00, 0.00, 0.00
  '
  Error: "
  Exit code: '0'
  Uptime - exit: 04:27:11 to 12 minutes, load average: 0.00, 0.00, 0.00

  error:
  (com.vmware.library.vc.basic/vim3WaitTaskEnd) "AddStandaloneHost_Task" task error: the authenticity of the host SSL certificate is not verified. (Name of the dynamic Script Module: vim3WaitTaskEnd #20)
  Login with password
  Connected!
  Execution of 'uptime '.
  Output: ' 21:28:41 until 02:39, load average: 0.00, 0.00, 0.00
  '
  Error: "
  Exit code: '0'
  Uptime - exit: 21:28:41 until 02:39, load average: 0.00, 0.00, 0.00

  error:
  (com.vmware.library.vc.basic/vim3WaitTaskEnd) "AddStandaloneHost_Task" task error: the authenticity of the host SSL certificate is not verified. (Name of the dynamic Script Module: vim3WaitTaskEnd #20)
  Login with password
  Connected!
  'Vmware' running - v
  Output: "VMware ESXi 4.1.0 build-260247
  '
  Error: "
  Exit code: '0'
  out of VMware - v -: VMware ESXi 4.1.0 build-260247

  error:
  (com.vmware.library.vc.basic/vim3WaitTaskEnd) "AddStandaloneHost_Task" task error: the authenticity of the host SSL certificate is not verified. (Name of the dynamic Script Module: vim3WaitTaskEnd #20)
  (com.vmware.library.vc.basic/vim3WaitTaskEnd) "AddStandaloneHost_Task" task error: the authenticity of the host SSL certificate is not verified. (Name of the dynamic Script Module: vim3WaitTaskEnd #20)
  (com.vmware.library.vc.basic/vim3WaitTaskEnd) "AddStandaloneHost_Task" task error: the authenticity of the host SSL certificate is not verified. (Name of the dynamic Script Module: vim3WaitTaskEnd #20)

  Hi Ken!

  It's a well-known (not good) workflow limitation included.

  Find the solution here:

  http://communities.VMware.com/docs/doc-14363

  Thanks goes to Andreas :-)!

  Cordially, and have fun with vCO :-)

  Joerg

• Add disk Workflow fails when you use the LSI Logic SAS SCSI controller

  I'm in vCenter Orchestrator 4.0.1

  When you try to run the workflow work add drive on a virtual machine that uses the LSI Logic SAS SCSI controller I get an error no controller found.

  This workflow is under: library-> VIM 3-> Virtual Machine Management-> device management

  The workflow add disk supports the LSI Logic SAS controller?  If this is not the case, no idea of how to create my own custom adds workflow to disk that would work with this controller?

  Thank you!

  Which plugin you have configured to talk to your Virtual Center? the plugin 3.5 or 4.0 plugin? If you have used the plugin 4.0, you must use the library-> VC-> * workflow so that the correct objects get used.

• Informatica workflow fails with the CWB0111 error

  My environment: Informatica 9.0.1, CAD build a 10.1.3.4.1. patch.20110427.0538 Build date: April 27, 2011 on Windows server, databases - iSeries V6R1. Informatica connects to the As / 400 using an ODBC DSN name.
  
  When executing multiple maps don't fail with the following error code
  Severity: ERROR
  Timestamp: 2011-08-15 18:39:44
  Node: node01_HSCUSCHLWS00112
  Thread: READER_1_1_1
  Process ID: 113076
  A message Code: RR_4035
  Message: SQL Error]
  FnName: Pick-[IBM] [I pilot Access ODBC System] column 16: CWB0111 - a buffer passed to a system call is too small to contain the data back
  FnName: Pick-[IBM] [I pilot Access ODBC System] data type string truncation on the right.
  FnName: Pick-[IBM] [I pilot Access ODBC System] column 16: CWB0111 - a buffer passed to a system call is too small to contain the data back
  FnName: Pick-[IBM] [I pilot Access ODBC System] data type string truncation on the right.
  FnName: Pick-[IBM] [I pilot Access ODBC System] column 16: CWB0111 - a buffer passed to a system call is too small to contain the data back
  FnName: Pick-[IBM] [I pilot Access ODBC System] data type string truncation on the right.
  
  I searched on the web and it seems that the Linux/Unix driver for iSeries has some problems with Unicode, but my environment is Windows only.
  
  Any suggestions are welcome. Thank you!

  Did you follow all of the steps in your DB system specific Installation Guide? In particular, what exact ODBC driver are you using? Also, has confirmed the connection via the Client configuration wizard? Also found the following problem on a possible bug to theis URL: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14281148&tstart=0

  Hi all
  The problem is solved in half! This is a bug in the IBM driver.
  It's just exactly the same cause (locale) in the following thread:
  http://www.IBM.com/developerWorks/forums/thread.jspa?MessageID=14051384
  I think the problem is that the AS 400 (iSeries) responds with 30 characters and converted to UTF8 it is 31 bytes. This is a bug...
  If you want to ask more details, but in a nutshell, you need to assign some of your Linux/Unix environment variables what whatsoever NOT utf8!

  I hope this helps. If so, please check the response as helpful or appropriate.

• Get a series of workflow variables failed

  Hello

  is it somehow possible to read the variables of a workflow failed in another stream of work?

  For example to automatically check if all the necessary variables have been put correctly into the workflow failed run.

  Thank you.

  Thomas

  Looks like a blog article I wrote earlier:

  How to retrieve the details of Workflow

• DAC failed over but Etl informatica workflow in workflow monitor

  Hi all
  I am running a plan of execution with domains is the execution plan of "Finance - Accounting".and finished but I find there are so many workflow failed in workflow monitor. Details of the error "ORA-26002: Table XXXX index defined on it.
  so I create a small topics Add only a single task (SDE_ORA_GLAccountDimension) and create a plan of execution with this SA for test.the same error has occurred.
  As usual, CAD will run this workflow tracking these parameters:
  1 truncate table
  2 remove the index
  3 run the workflow
  4 create indexes
  5 analyze table
  I request the date of creation on the index of the table and he changed after etl end.and I found the workflow log end time is later than to create indexes of time.
  So I guess that the reason is when dac did not have the exact status of workflow.when setup3 began, CAD status completed and run the next installation, but actually still run etl then what created.workflow index failed.
  I don't know how dac to get the workflow state. I don't know even if I found the reason. Could someone help me?
  Version:
  Source system: EBS R12.1.1 and Oracle DB 11.1.0.7
  DataWarhouse: Oracle 11.2.0.1 DB
  BI application: 7.9.6.1
  DAC: 10.1.3.4.1
  Informatica:8.6.1 HotFix6
  
  DW is installed on 64-bit CentOS5.
  BIApps, DAC, Informatica installed on MS Windows2003 64bits.
  
  Thank you very much
  Alther

  Try this:

  DAC 10.1.3.4.1 Release Notes to

  http://download.Oracle.com/docs/CD/E12513_01/doc/BIC.101/e12655.PDF

  3.21 DAC task failed on Non-English operating system
  This problem applies to the DAC 10.1.3.4.1 and Informatica PowerCenter 8.6.1, HotFix3
  DAC Server uses pmcmd to launch workflows on Informatica server. In the
  English operating systems, DAC issues orders in the non-blocking
  (asynchronously) mode and the Informatica polls for the State of the workflow. The
  out of the getWorkFlowDetails of pmcmd is queued in the DAC\log directory, and
  and then gets analyzed to determine whether the workflow is still ongoing, completed
  successfully, or failed.
  However, for operating systems non-English DAC sends commands in the
  (synchronously) standby mode. This means that when the process ends at the exit
  code indicates DAC if the workflow was successful or not.
  Workaround
  The commands used by DCA to connect with Informatica are externalized in one
  the file is called infa_commands.xml.
  The DAC 10.13.4.1 control model is not a placeholder to specify the
  standby mode. Without this configuration in standby mode, on non - English OS based
  installation, this translates to the treatment of the DAC of the front execution even as the
  Workflow finishes executing. This could lead to errors, as in bulk of Informatica
  charger is not because of the presence index of tables or without aliens
  key references.
  To solve the problem,... etc.

• Add vCenter Workflow error: unexpected status code: 404

  Hello

  I am trying to add a vCenter vRO 7.0.1 host using the plugin existing VC (ver. 6.0.2.3435085) and I run a strange question.

  If I choose NO for the option ' will you orchestrate this instance "then the workflow completes successfully.  This does allow me to run workflows against the vCenter.

  When I remove the existing vCenter and re - run the workflow of vCenter Add, this time by choosing YES, the workflow fails with error validation process: unexpected status code: 404 (Workflow: Add a vCenter server instance / validate (item2) #1)

  Any ideas why check YES causes this?

  My entries:

  Host: fqdn.servername.com

  Port: 9443

  Path: /sdk

  Ignore the Cert: Yes

  Thank you.

  Hello

  This error probably means that the port number is incorrect.

  Are you sure 9443 is the correct port number? Usually, the port number is 443, not 9443 (port 9443 is where vSphere Web Client is available). Could you re-run the workflow with port 443?

• delete the corrupted workflow

  I want to delete a corrupted in VMware Orchestrator 5.5 workflow.  Symptoms of corruption:

  (1) watch the icon start only in the schema.  Tried to re-create a simple workflow with the hope to then delete it without success.

  (2) on the reboot of the server Orchestrator and opening of the GUI, a workflow executed and failed.

  (3) workflow shows as a start icon only

  (4) any attempt to alter the flow of work in the user interface fails. Wanted to get out of the faulty behavior; However, no recording is possible.

  (5) tries to remove the workflow fails with "Server error: could not commit transaction JPA; nested exception is javax.persistence.RollbackException: Transaction marked as rollbackOnly.

  (6) history of version of it is forbidden

  (7) integrated database race

  Is there a way to remove the workflow in the console?

  You can try to do this via the REST API:

  Operation: REMOVE

  URL: https://orchestrator1:8281 / vco/api/stream/5d7fc59c-57f7-4f59-b935-c9d3669df7f2<-- updated="" based="" on="" values="" observed="" in="" your="" log="">

  For example, I've just tested this and remove a test workflow by using this url in my lab:

  https://myVRO:8281/flow/d11e71d7-22c0-417f-b967-3437e67e2273

  For more information on the REST API, see the documentation: https://your-vco-server:8281/vco/api/docs/resource_Workflow%20Service.html

  If you are not already familiar with the REST Postman customer, take a look at my article here: http://bit.ly/vroPostman

  

• Run workflow problem log view

  Someone at - he noticed this? I noticed on vCO 5.5, only the last successful workflow log run is displayed correctly. If you click previous workflow successfully performed, display would not change. Workflow failed has no questions to display the correct logs.  The only way to properly display these logs is to click events, go to another stream of work performed, then go back to the previous workflow execution, click diagram, and then opens a session. There are some cases I want to be able to watch the successful previous workflow logs run like copying information.

  Thank you

  Hello and welcome to vCO! The behavior you describe is expected and often discussed. The logs tab is for information within workflow generated when using System.log ("of the text here"); The information is available in the logs tab ONLY when you run the workflow with the client of the free vCO. When you close the client, and then open it to the top of the newspapers of all executions of workflow tab is empty. This information also get into the /app-server/server/vmo/log/server.log of your vCO server file. It is the method of non-persistent logging.

  For continuing registration, we use Server.log ("of the text here"); and that appears on the tab 'Events' of the execution of your workflow - even when closed and reopened

• Send a notification failed

  Hello

  is it possible to send a notification by email when workflow failed?

  Rgds

  Jeremiah

  I highly recommend Burke approach since there are a lot of nuances that make a general solution will not work perfectly. There is also a high probability that if you did not get emails or Error Handling to the job that you are fairly new to vCO, and the website would be the BEST place to start! I'm sure they have examples of management errors and emails, but perhaps not in e-mails to handle errors...

  That said, I can try to help you quickly... Here are some quick and dirty steps to get something... you will need to email plugin installed... I do not know...

  1. for all scripts or places where the workflow can fail, the Exception variable to bind to a string of your choice attribute (I'll call this ErrorText)

  2. connect roads of workflow of exception (instead of a normal blue color, link the red color) to a script. Make sure that this script has access to ErrorText.

  3. in the script, use the email (sloppily written) follows:

  send_email function (subject, body)

  {

  var message = new EmailMessage();

  message.smtpHost = "xxxx.xxx.xxx.xxx";

  message.fromName = 'Admin vCD;

  message.fromAddress = "[email protected]";

  message.toAddress = emailReceivers();

  message. Subject = subject;

  message.addMimePart (body, text/html"; Charset = UTF - 8 ");

  System.log ("sending mail to:" + message.fromAddress + ", to:" + message.toAddress);

  message.sendMessage ();

  }

  send_email ("" notice: error in workflow ', ErrorText ");

• Workflow is not all of a sudden

  I've created a workflow that worked fine a few weeks ago.  I used the Planner to do reproduce every Friday.  It was fine for a bit, but now it fails, even when I try to run it manually.  I don't get any errors in the other client that he just said error and workflow failed.  Even the tab newspapers... It's just empty.  I thought I remembered it showing me what he was doing before.

  I did apply the upgrades.  I thought maybe it was to change the password or something, but I set it up to use a service account and the password has not changed recently.  It seems to fail almost immediately.

  It comes to vCO 4.1.1.

  Any suggestions?

  Did you use the VIX plug-in or do you just have it installed?

  If you have installed it, then this msg indicates that you did not copy the VIX libraries (unzip archive distributed with the plugin as described in the docs) on your system and add the path to the path of the environment. If you add the path to the VIX libraries, or remove the VIX plugin, your workflow should resume work

• DAC Task detailed and the workflow does not... But the task completed DAC

  Team
  
  Need help on this issue... I ran an incremental ETL today and the other of the "Sub" task failed in the DAC but the task is marked duly filled and DAC Plan completed successfully. When I check the level of the task details, it shows that a task fails... and also the corresponding workflow failed in Workflow Monitor... For the side safer, I deleted the task of the DAC and recreated, re assembled the area in question and re build the plan of the... but still the same issue.
  
  Please guide me where to look for the problem of communication between the TASK of the DAC and DAC 'TASK DETAILS.
  
  Thank you

  Hello

  We had the same problem. The parameters--> System DAC 'Tests' properties field must be "False".

  I hope this helps.

  Thank you
  S

• Several node Plugin - invalid attribute type: properties

  Hi all

  I have installation multi-user plugin. The workflow fails with the error "invalid attribute type: properties. One of the parameters on the flow of working remotely is a "Properties". It works fine without setting of type of properties. Y at - there no limitations on the types of parameters for multiple node plugin.

  Thank you

  Hello

  Looking at the source code of the plugin multi-Node, it seems that not all existing parameter types are supported, including Properties and the properties of table /. Not sure if this is the case of the design, or if it is an incomplete implementation / bug (it's probably the last).