W520 and C:/root

Similar Questions

• My thinkpad W520 and my ssd (Crucial M4 128)

  Hello people. I read the thread entitled W520 and various issues of ssd. In fact, it was a relief for me to read after all the trouble I had try my M4 running successfully in my W520.

  When I first installed the M4, it wouldn't let me install windows. I tried many things and almost come to the conclusion that the drive itself is bad because he called me all kinds of problems. That opinion changed when I tried my M4 in other machines. It all worked perfectly. Then, I thought: * beep *? Would it be the laptop? When I came across the wire, that I mentioned above, I knew I wasn't alone and knew that it was actually a compatibility issue.

  However, I was reading comments the other day on the W520, and many critics included ssd in their tests and reported good results. There was no mention of any problem of ssd. I also noticed in many forums that some users take advantage of their W520 strengthened by the performance of the ssd.

  So, it's like a situation of chance/unlcuky? Some w520 will work with ssd and some won't be fair?

  There is only one thing that I haven't tried yet. Try the M4 in the my W520 with its latest firmware update (0009)... better suddenly you think?

  And where is all this lenovo?

  Thank you.

  Just for you guys do know. He has WORKED with the latest firmware.

  Now, I write my W520 with the Crucial installed M4.

  Thanks for everyone.

• 1242 both as Root and no Root

  Hello world

  I'll put in pair of 1242 APs as root and Non-Root bridge, I'm not able to find the installation on the 1242 AP Mode when setting the root not for the best signal.

  any help will be appreciated.

  HM

  Hi HM,.

  As far as I KNOW, we have not INSATALL on the AP 1242 mode if we use it as ROOT and nonroot... This is only available on 1310 bridge or 1410 bridges... not on 1242AP...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Root AND non-root ssh access

  Hello

  Is it possible to leave the root and non-root ssh users access on a server esxi (3.5).

  I like my scripts to a minimum access but keep my root access on the server.

  The solution w on the yellow bricks, where everything indicates, disables the root access.

  Thank you

  The user that you create has a valid shell?

  During the user add (using VIC), you can specify this option... or you need to check/etc/passwd to see if the shell is the same of the root user.

  André

• W520 and mini 433810U dock

  Do you know if the 433810U and the 433830U abandoned are the same, except for the power supply?

  Can the spirit, I buy a 433810U, plug into my 170w PSU and use the dock with my W520?

  Dock connector will prevent 170W PSI are used

• W520 and Intel SSD 520 external casing replacement?

  I decided to upgrade my W520 the Intel SSD 320 to 520 SSD Intel.  I tried the 520 in an enclosed and theW520 does not recognize the drive.  I am trying to determine if the problem is the controller in the external case Thermaltake BlacX or was it simply the problem of having the drive in an external enclosure? (In other words, it would work in a different case).  I got an OCZ Vertex 3 that would work not in external enclosures, so I'm inclined to think this is the Forum as being both the Vertex 3 and Intel 520 uses SandForce controllers.

  Suport of Lenovo, I called and they told me that the only way I can copy the disc's to buy their Ultrabay III of A 0, 65623 adapter and copy the disks inside the machine.  I use older software of Casper and I don't think he would have Renesas USB 3 drivers, if I boot from a CD and trying to copy my old hard drive backup.

  Obviously people do that.  And, if the Ultrabay III adapters are not available at this time, they must do without them.

  How can I copy my data from the old drive to the new drive?

  Thank you!

  
  

• Gel W520 and HDD Led always on

  Hi, I have a new i7-2820 W520, 8 GB Ram, NVidia 1000 M, SSD OCZ Vertex3.

  After some problems with AHCI and SSD controller now it works very well, with all the drivers installed properly, but sometimes (1 or 2 times a day) the system freezes and the hdd led remains always on (flicker). I can move the cursor of the mouse on the screen, but I can't do anything else and I have to restart the system (by pressing the button for 5 seconds)

  Any suggestion?

  Thank you

  Luca

  First of all, don't do anything when you get the gel and see if your W520 thaw on its own until after 5 minutes. You can then check this entire thread for the many "bugs", but attention to the #9 message.

  http://www.ocztechnologyforum.com/Forum/showthread.php?87349-new-OCZ-vertex-3-stalls/Page2

• Unable to connect to the CLI as admin (collectorplugin and the root are disabled)

  I am trying to troubleshoot a problem described in https://supportforums.cisco.com/discussion/12927451/unable-login-cli-cspc download of inventory is a failure and I want to confirm that all Cisco servers are available and listed in the hosts file. When I try to open a CLI session as "admin", it shows the home page, the error of java and then returned to the connection. I have created the accounts collectorlogin and root during the initial set-up. Is it possible to activate these accounts now (from the web console, for example) or to resolve the problem with the w/o access CLI admin account? Thank you.

  It does not exist. Please re - deploy the EGGS. You can follow the steps here:

  https://supportforums.Cisco.com/blog/12696871/self-service-onboarding-setting-CSPC-25-collector

  Thank you

  Lynden

• hardrive takes a long time to start and stop, root for the virus scan, none found

  works fine in the morning, afternoon, it can take up to 5 minutes to start, currently 3000 yards from a cell tower, it can take just as long to stop it, what is a hard drive problem or the computer something about 2 years, laptop

  Hello

  1. which version of the operating system is installed on the computer?

  If you use Windows 7, try the methods below and check if the problem persists.

  Method 1:

  Perform the disk check to check and fix bad sectors on the hard disk.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  Download and run a full scan of the system using Microsoft Safety Scanner to detect any problem related to the Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• W520 and ThinkVantage System Update

  Hi all

  Is it possible to use ThinkVantage System Update to only selected facilities? I need to find a driver that causes errors in my applications and was thinking about the best way to achieve this.

  ThinkVantage System update all THE drivers/application or I can choose what I want?

  Thank you

  You can select what you want.  It will present a list that you can turn on or off individually.

  Z.

• Bridge root and non-root-bridge issue?

  Hi all

  My Network (see diagram)

  I want to use in each AIR-AP1242AG-E-K9 antenna two (AIR-ANT5195P-R = used for 802. 11A

  and AIR-ANT24120 = used to 802. 11 g)

  view the diagram and tell me:

  -It is possible with my AP-1242? If Yes, tell me how to configure 2 AP?

  Thanks for your help.

  # For 1242, two connectors for 11A, two connectors for 11 b/g, but these two connectors are working for the same radio card, no two cards, they are useful for providing diversity.

• W520 on heating and nvidia quadro 2000 m disabled by windows

  As I reinstalled windows 7 on my W520 and refusing to activate my card nvidia quadro graphics 2000 m (Code 43)

  For a while the fan is overheating and the left hinge right become very hot.

  I think that the graphics card is dead, but I want to know why and if I can stop the overheating.

  Is the graphics card soldered on the motherboard of the W520?

  Thanks for your help.

  PS: Only the Intel HD graphics chipset is running...

  If the guarantee of the machine is still in force, it will be covered, unless it has failed because of some accidental damage like a spillage. In this case, it will be refunded only if the original owner bought the optional warranty "accidental damage".

• [W520] How can I configure microphone and speakers?

  Hi, I recently got a Thinkpad W520 and I am having some problems.

  How can I set up the microphone for use with Skype or Msn Messenger? Now, whenever I make a call, he said that Skype/Msn does not detect my sound card, so it won't work.

  The microphone does not work, and while I try to access the microphone, every sound will stop, as in any music in the background will not be in the volume mixer or anything.

  How can I solve this problem?

  If it helps at all, it works for Ventrilo, but only in some settings.

  There is a known issue with the driver Conexant and Skype in the preload. Update the audio driver should solve ubiquitous.

• What is root\mtd\000? -I get a notice of material does not... Plug-and-Play

  I get a notice of material does not...   Plug And Play, ROOT-MTD-000...  Should I uninstall all of this

  Or I would have something To Worry About?

  Hello

  1. when exactly you get this error message?
  2. What is the full and exact error message?
  3 did you recent hardware or software changes to your computer before this problem?

  Look for the Red or yellow bangs on the device for devices Manager and send back the same.
  By using Device Manager
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_dev_mgr.mspx?mfr=true

  Try the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

• Advice needed centenarians and hi-res W520 or new and low resolution W530?

  Hello people!

  I'd appreciate your advice and your experience to help me with my contemplation.

  Im a CAD (solidworks, autocad, revit) and graphics (adobe, sony vegas) user, I need a new machine because my x200t do not support the load more...

  I have a limited budget, and I have two options with the same price (of Lenovo in any case):

  A demo version of W520:

  Machine type/model: 42844 MG

  Intel Core i7-2860QM - 2.5 GHz

  2 x 4 GB 500 GB 7200 RPM

  15.6 inches (1920 x 1080 nVidia 2000M 2 GB)

  DVD - Rec

  WiF, cornflower, WWAN

  RPF 9elements color sensor Cam card reader

  Windows 7 Pro 64

  New W530:

  Intel Core i7-3720QM - 4 c - 2.6 GHz

  8GB 500 GB 7200 RPM + 32 GB mSATA

  15.6 inch (1600 x 900 nVidia Quadro 1100 M)

  DVD - Rec WiFi color sensor of fingerprint 4-in-1 card reader

  Backlit keyboard 9 cell cam

  Windows 7 Pro 64

  I would buy something and forget the upgrade for the next 3 years...

  I'd appreciate advice.

  Kind regards

  Gili

  • Do not spend money for the color sensor. Buy a sensor of external color that you can use the laptop monitor and your internal display.
  • Why do you have 32 GB on the W530 mSATA? Go with an SSD as a single disc, or go with an SSD in the main Bay and the HARD drive in an adapter ultra bay. I don't think that the 32 GB mSATA is logical from the financial point of view as a disk cache only.
  • Do you need the cam on the on the W530, which should save money as well.

  2000M (W520) vs... K1000M (W530)

  Both have 192 cores, 2 GB of Ram, bandwidth, same memory, same version of OpenGL, shader model directX version PCI-E generation FP32 and Optimus.

  Differences: K1000M gives you DisplayPort 1.2 and the 2000M is only DisplayPort 1.1. TDP is less than 10W on the K1000M.

  See this pdf to more details.

  For graphics cards will perform more or less the same (W530 could be able to turbo graphics or more processor because of less PDT). You will benefit from the additional performance of the 3720? If so, then I'd go with the W530.

  I normally recommend Win 7 Home Premium and not Pro, since they both will come with a $14.99 to Win 8 Pro upgrade. I guess you want to stay on Win 7, at least until the 8 is on SP1, if not for the life of the machine. So Win7 Pro might be good for you, if you need functionality.

  You what you need to consider is: the processor in the W530 will benefit you more than the screen on the W520 and you prefer one keyboard on the other.