W700 - Skype fail with Windows 8.1
He gave another go with W8.1 and everything seems to be OK and smooth now.
Only Skype won't load, I get the blue screen loading and after a few seconds, it closes.
There is a problem with the cam drivers. If we diasable/disable in devices, Skype Manager starts very well.
the strange thing is in other applications that the cams are working properly.
Tags: Acer
Similar Questions
-
Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP. I applied microsoft AutoCorrect (Mr. Fix) and 4 registry commands in the article of knowledge, but it is always a failure. Help?
Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP. I applied microsoft AutoCorrect (Mr. Fix) and 4 registry commands in the article of knowledge, but it is always a failure. Help?
Any specific error message?
Download and install SP2 manually: -.
http://www.Microsoft.com/en-au/Download/details.aspx?ID=39667 (32 bit)
http://www.Microsoft.com/en-AU/Download/details.aspx?ID=39647 (64-bit)
If in doubt about whether or not you are running 32-bit or 64-bit, see this topic:
If you still have problems, try to update in a clean boot state:
http://support.Microsoft.com/kb/929135/en-AU (don't forget to return to a normal startup when finished).
Office updates may fail if the update files, look for the original installation files. Sometimes the complete file download remedies this problem or put the installation media in the installation drive can also help. If still no, you may need to do a repair installation.
-
HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10
I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work. I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it. Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time." I have administrator rights on my laptop, no one else is logged on, and I have no other applications running. Any suggestions?
Hey there John!
Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.
Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.
Good luck! Enjoy your day
-
REMOVE THE LINK SKYPE ACCOUNT WITH WINDOWS ACCOUNT
my Skype account is linked with the hotmail account. I would like to dissociate the Skype and hotmail. I don't want windows live mail to access Skype contacts or vice versa. How do I unlike Skype for windows can I live mail?
Hello.
Simply go to https://secure.skype.com/portal/account/settings and under related accounts, unlink your Microsoft Account to your Skype account.
Hope this helps!
-
VMWare View fails with windows 7 ultimate 64 bit and smart card
I have two PC's are both 64-bit Windows 7 Ultimate machines. My laptop connects to my work PC, but my office will not. He is aware of my smart card, but when I try and connect it fails saying "failed to connect to server to connect to view. Smart card or certificate authentication is required. "Anyone else had a problem like this?
See http://blogs.vmware.com/view/2010/10/troubleshooting-smart-card-authentication-using-the-windows-view-client.html for more information on this problem. Let me know if you have any questions.
-
I have two laptops Lenovo X 201. An installed Virtual PC/Win XP fine mode, the other gives the following when installing Virtual PC update. ; (I made the hardware, virtualization and the Windows XP mode prereqs)
(1) throws a dialog box titled saying "stand-alone installation of Windows Update": "update is not applicable to your computer."
(2) in the event viewer, you see this message:
Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\Windows\system32\wusa.exe" "D:\Downloads\Windows6.1-KB958559-x64-RefreshPkg.msu" ")
(3) check in the registry for the following paths is identical between the two computers and recommended values
HKEY_USERS\. DEFAULT\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
(4) emptied the folder "C:\Users\user\AppData\Local\Temp".
(5) I do not receive the following symptoms
(a) the low 'Register of space' error, sets the size of "unlimited" registry: so no need to change the registry setting
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
Key: RegistrySizeLimitOther thoughts? What does error code 2149842967 mean?
Thank you
Hello
Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.
Thank you.
-
Skype does not in closing the program. (Skype 7.17 - Windows 10)
I used to have the problem where Skype will stop at random to answer when I tried to start, which would force me to close it with the Task Manager, then try again.
After a lot of fiddling around, update drivers, update of Internet Explorer (please kill me why is this one thing) and so on... I finally managed to get this problem to the most out of my life.
Now, still only a problem When I try to close the program (by right-clicking on the icon and "quit") it just does not... at all... Strangely it does not change the "not responding" mode, it's just... died. Even in taskmanager it does not show as a "no answer", but he acts as if nothing is wrong.
Here's what "solutions do not work:
-Remove temporary files
-deleting files appdata
-do a clean reinstall
-addition of "'https://apps.skype.com ' on sites in IE 'internet options'"
-Remove "'https://apps.skype.com ' on sites in IE 'internet options'"
-closing all individually the program other than Skype and try again
-Deletes the registry values for Skype (it was my last resort)
NOTE: While looking through possible questions, I noticed that my Skype in the program compatibility mode is locked 'Windows Vista'... it is grayed out and cannot be changed, no matter what I try. Haven't found a solution for this yet (not even in safe mode).The first thing to do is to identify the compatibility set to Skype options.
Right click on the shortcut on the desktop, select Properties, then the Compatibility tab.
Press the button "Change settings for all users" and disable the compatibility options in this tab
-
I can't deal with the bug of 'mark as read' but Skype no longer starts with Windows (even though it says that it should in msconfig) and there more no option password/auto login as before to remember. Skype always started automatically before 7.17, and it took a few seconds to start. Now, it takes about 2 minutes to click on the icon to connect. What is the problem with this version? Fortunately I've never known messages in the wrong order-bug.
I use Windows 8.1.
The sign of the Auto option should be available in the tools of-> Options-> General settings.
https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop
-
Hello.
I hope there, can someone help me!
I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.
I use Protection Premium Bullguard and Acronis True Image installed.
I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.
When I run the upgrade from a DVD burned ISO, it gets 37% and fails.
Hope you can help. (fingers crossed!)
Chris
The Setup error log file shows:
2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-05 16:48:49, error CONX failed to initialize the data of net class 800700052015-08-05 16:48:50, CONX error could not get data from the printer class 80070057
2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002
2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]
2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002
2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]
2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002
2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]
2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002
2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]
2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216I have now abandoned and rebuilt my laptop using the recovery partition. The upgrade to Windows 10 came immediately, and it installed fine.
Hooray
-
Windows cannot connect to the printer operation failed with error 0x0000007e
Hello
OS: Windows 7 x 86 SP1
Print server: Windows Server 2003 R2 SP2 x 86
Printer: HP LaserJet 8150 printer shared and listed in the directory
Problem:
When I try to install the printer in the Add Printer Wizard, choose install a network printer, she finds a driver on the server, installs, then brings up an error (see topic).
In the Print Service logs, I see the following:
"The print spooler failed to load a plug-in module, 0x7e error code. See the user context information for event data.
I can install the printer very well if I choose local printer, new port, TCP/IP, and enter the IP address. This isn't a solution, as users cannot be expected to go through this process, or for me to go around all the machines and do it manually. More I want than the print jobs to the print server's spool, and I think that the local installation method uses the local spooler.
I tried to install the driver of HP UPD PCL 6, x 86 and x 64, on the print server.
When I check what the client machine pilot chose to install by going to the properties of the print server, I can see that he chooses the former driver "HP LaserJet 8150 Series PCL 6". I presume that it is incompatible with Windows 7, that's why I am getting the error cannot connect.
How can I get Windows 7 clients to use the UPD?
I left our Windows 2003 print server to a Server 2008 and comes to install the HP UPD x 86 and x 64 for each printer. Now everything works perfectly! All XP and 7 customers can install printers network without problem.
I suspect that the problem was due to have many different versions of drivers on the old print server, and customers did not know which to use?
-
Name of the product - HP Laserjet 1200 Series PCL 6 Driver
Operating system: Windows 8 Home Edition, 64-bit
Error message: cannot find the series 1200 on the network. To locate manually click ok...
Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit
Description:
1 installation of an existing network, consistedof a desk and two wireless laptops.
2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.
3 replaces one of cell phones with 8 64-bit Windows.
4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.
5. the configuration of the wireless printer is
Name: HP Laserjet 1200 Series PCL 5
Port: \\Central\HPLaserj
Printer: HP Laserjet 1200 Series PCL 5
Driver: HPMCPM25. GPD 5.8.2008
Problem
Impossible to re-create this path with Windows 8, 64-bit configuration.
a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430
This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder
b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good
c. process is unable to locate a driver and ordered to locate manually.
d. accessing the HP Universal Driver files fails because a driver is not found.
e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.
f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.
This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.
Problem solved.
This link gives a good overview of the solution
http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/
-
Windows update fails with 0 x 80070424 among others (update agent will not install)
I tried to install iTunes 9.2 on my computer of girls running Vista 64 sp1. It failed several times with an error message encrypted with public keys and RCH80. I took this down to a problem of lack of security patches. In the process, I noticed that Windows Update has been fails with error 0 x 80070424, indicating a required service was not running.
so I downloaded sp2, also the operation failed with error 0 x 80070424 even. I checked the Background Intelligent Transfer and start-up and running (so I restarted), I checked Windows Update and it was also running and so I restarted. Same result. I've disabled UAC and restarted. Still no joy.
Then I read an article on the subject, said a service called "Automatic updates" should be running, not only he was not running, did not exist. Some that I've been on something I downloaded "windowsupdateagent30 - x 64 .exe" to install the service. Unfortunately, this fails with a fatal error, no number error, simply "windows has encountered a fatal error.
It is where I am at this time - trying to figure out a fix for this. Thank you. (I also disabled AV, firewall, etc., ran several antivirus scans, malware scans including Malware Bytes, AVG and Avast and MS Defender and rootkit detectors which come clean).
OK I found this user Mohsen Arjomand:
Step 1: Manually replace the corrupted Windows Modules Installer
==================================
Step 1: Change the owner of the file maintenance
1. click on start. In the search bar, type "%windir%" (without the quotation marks
marks) and press ENTER.
2. click right maintenance folder and click 'properties '.
3. click on the Security tab.
4. click on advanced.
5. click on the owner tab.
6. click on edit.
7. under "change the owner of ', select the administrator account. Click
"Replace the owner of subcontainers and objects". Click OK.
8. click on OK. You may receive an error of "deny access". Just move forward.
9. in the Security tab of the properties of maintenance records, click on change.
10 select Administrators, and then grant him "total control".
11. click on OK.Step 2: Manually restore the missing file
============================
1. download and save the file http://www.4shared.com/file/197624120/979be69/fix.html on the desktop form fix.zip.
2. extract the two files. TrustedInstaller.exe and TrustedInstaller.reg.
3. copy the file TrustedInstaller.exe in C:\Windows\servicing folder.Step 3: Registry backup
===================
1. click on start. Type REGEDIT in the search bar and press ENTER.
2. Select the computer (the root node) in the left pane, click export under the
Menu of files, choose all under the scope of the export, select desktop in the Save in box
and type backup in file name. Click Save.After that, please refer to the following procedure to import the registry key.
Step 4: Import TrustedInstaller.reg
===========================
1. double-click on the TrustedInstaller.reg file in the file Fix.zip.
2. click Yes when you are prompted to import.Restart the computer and check if Windows Update works.
And then manually install the components of update as stated in...
http://support.Microsoft.com/kb/949104/
Voila!
It's annoying that it is a known problem with the trustedinstaller.exe being corrupted and or deleted, but it is so hard to find an answer to the question.
-
Windows Update fails with Error 0x80072F76 on Windows 2003 server number
I try to run windows update on my windows 2003 server. The update fails with number 0x80072F76 Errow. The Windows Firewall/Internet service Connection Sharing (ICS) is stopped and the security settings on IE is set by default. IE version is 8. The Windows Update screen is also not displayed correctly.
You talk about servers, you use WSUS?
Forum specific support by WSUS:
http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads -
Windows updates fails with the error code 'E '.
Original title: Error Code 'E '.
What does the error code E?
Keep saying I need updates and then fails with the E. help error code, please.
Hi Rodrigues0406,
1 Windows operating system you are using?
2. What is the exact error or message code you get?
Method 1
I suggest that you reset Windows update components and check if it works.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2
If you're still having problems, then you can check in the history of Windows update and the updates recently installed in vain.
Step 1:
Check the update history to see what updates have been installed or has failed. See the link for the same mentioned below.
See the Windows updates are installed
http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
Step 2:
If you see updates failed, you can try downloading and installing the updates manually from the Microsoft download center:
http://www.Microsoft.com/downloads/en/default.aspx
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Windows 2008 SP2 installation failed with error code 0 x 80041002
Hello
I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.
I tried the steps in http://support.microsoft.com/kb/947366:
1 uninstalled antivirus.
2. install KB947821 analysis tool
3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en
Without success. What should he do next?
Thank you
Frank
Hi Frank_673,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.
Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Unable to connect to the network
I have a KDL-55EX710 with the SOny USB lan adapter. I can't connect. I tried using the wireless and now have tried with the wireless modem/router combo directly and does not always connect. I have both PS3 and the two have connected wireless to my ne
-
Can El Capitan be moved from one test to the main partition disk partition? I can't download on main partition as the site, says it is already downloaded.
-
Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!I rebooted and then I got this message "0xC0
-
Hello I installed Microsoft Virtual PC 2007 SP1(64bit) from here However, I met this errro:
-
Options of alias for POV while implementing the data audit trails
Hi allI have a request to implement the option Alias for the account dimension, which gets exported to the HSP_AUDIT_RECORDS table when the Audit trail for data is enabled.In the column of ID2, user want to see Alias name of the Member account.Do we