WAG320N - 5 GHz
After using WAG320N for more than a week, that I decided to change default 2.4 GHz to 5.
Immediately, my netbook loses connection and can't see same SSID.
No idea why?
802.11n does not strip a card can be used. 802.11n can be used on 2.4 GHz or 5 GHz. Some devices take care that only one band, a few times. It is not required to 802.11n to support both bands. Usually, if the card supports only a single band, this is the 2.4 GHz since it is most commonly used for backward compatibility.
Check the specifications of your wireless card: if it says its compatible to 802.11n/a/b/g, then it should support 2.4 GHz and 5 GHz. If it says that it is compatible to 802.11n/b/g it does not support the 5 GHz band.
Tags: Linksys Products
Similar Questions
-
WAG320N very bad 5 GHz wireless signal.
Hi all
Because I live in an apartment building, I decided to buy a proper router on 5 GHz. I see each of them and at least 12 wireless networks 2.4 GHz (mainly BT HomeHubs or other boxes UK ISP wireless). I am studying the CCNA and our teachers recommend cisco routers (linksys) as the best. I bought a WAG320N as one that suits that I could find on the British market for a reasonable price. The problem is that I have less signal on 5 GHz on 2.4 GHz I have 50% maximum of the 5 GHz signal and speed is usually lower than 802.11 g, average below 64Mbps! I can't believe. When I change 2.4 GHz signal has up to 80% as my old router TP-Link. The speed is more often up to 65Mbps, means awful. I have seen a lot of topics on this particular router but I couldn't believe that to sell Cisco products these awful and unreliable as this router. I tried to change channels on 5 and 2.4 GHz but it's always the same, the wrong speed and weak signal. My wireless card is Intel WifiLink Advanced-n 6200 and Sabayon linux and Windows 7 operating systems. I have a laptop and it is CCA 6 meters between the router and there are 2 walls. The router is still under warranty so I will not hesitate to return to PCWorld...
Thanks for your help.
I solved it. I moved the router more near my room. There is only one door of the room between the router and my laptop. Signal has cca 90% and the speed is especially 270 or 300 Mbps.
-
I'm in the United Kingdom.
ISP is Orange @ up to 20 MB service
-System information-
Seller: Linksys
ModelName: WAG320N
Firmware Version: 1.00.08, 2009-08 - 27 T 19: 37:13
Start the Version: 1.06
Hardware Version: 0.01-DSL information-
LAN Driver Version: The version annexed - A2pB023k.d21d
DSL VPI/VCI: 0/38
DSL Status: Showtime
Mode of ADSL: ADSL2 +.
DSL channel:
Rate upstream DSL: 828 Kbps
DSL downstream rate: 6142 KbpsDownwards upwards
ADSL noise margin: 10.9 17.4 dB dB
Attenuation of the DSL: 43.5 dB dB 22.7
DSL transmission power: 19.5 dBm 12.3 dBm-Wireless information-
Wireless Driver Version: 5.10.85.0.cpe4.402.4
Wireless status: enabled
Wireless Wide channel: 9
Channel of wireless standard: 11 - 2,462 GHZ
Wireless SSID: -.Systems:
1 x XP pro 32 bit with all the installed updates and service packs.
1 x Win 7 pro 64-bit with all updates installed.
Both systems use integrated Realtek Gigabit NIC (latest drivers) wired with Cat 6
Both use the same security software
Problem: -.
When the speed of ADSL, at snail PACE. I power off and power on the bridge. To decrease the speed of the line and until db SNR. (Worked a treat because Orange succeeded Wanadoo!)
The bridge, to reconnect to the ADSL and work very well, if only 1 system is turned on.
If both systems are on, gateway fails to reconnect and allow any browser see websites (Firefox, IE 8 32/64-bit and Minefield) or VPN or E-mail etc
I disable, 1 system and turning off the front door, then power on and second gateway system after that. Then, it will allow normal access to the Net.
I've had Network Magic installed, but is not installed where it was, it was not.
I don't have this problem with a DGN2000, which is what the Linksys/Cisco WAG320N replaced.
Apart from the definition of satic IP addresses for both systems, someone has ideas or know if there is a firmware that will solve the problem so far?
TIA
Del
ADD ON: -.
Just tried static IP addresses and there is no place in WAG320N to enable this?
All resolved.
WAG320N returned, as unfit for use.
This is after talking to Tech Support via Live Chat, that said they would be esculate... nothing.
Shame, Cisco/Linksys could not deliver even a beta version updated firmware, to at least try to solve the problem.
-
WAG320n to WRT610n connection helps WET610n bridge ethernet
I have upgraded my network with a modem/router WAG320n and have a (ethernet bridge) WET610n in my room remotely. Because the WET is just a single port, I would like to connect my old WRT610n router to bridge, but need to know the right settings and connection information. The goal is to use wireless in the remote location and additional ports.
Problem solved and improved
Thanks Klatch,
The WAG320n is nice, but not simultaneous dual band, so I put the 5 GHz. I wired hard (WAP610n) one point of access to the router, set it to 2. 4 Ghz and placed about 3 meters outside the router. This gave me access to the second floor for all devices with two bands. (I have given it's own SSID to distinguish it from the access point).
To extend coverage to the first floor, I installed Ethernet bridge Wireless N (WET610N) on the beach at the fringe of my output of routers (still 4 bars). The bridge is set to 5 GHz - because what is the WAG320. Then I connected the router WRT610N (which is simultaneous dual band) to the bridge. You plug the bridge into a LAN on the WRT610N, NOT the WAN port port. The WRT610 has been programmed to 192.168.1.2, disabled DHCP, NAT disabled. I have 3 other hard WAN ports connected to devices (Playstation, Slingbox, Blue Ray player). All other PC first floor is connected wirelessly via the 2.4 GHZ or 5 GHz bands. The coverage of the first floor is excellent. I held the different SSID for each router and Access Point, to distinguish which router or the band I want to connect to.
If linksys has been only the simultaneous dual-band of WAG320, it would provide the extension of coverage to all old and new features! Everyone is not wrapped around 5 GHz yet! Then. If you want to extend and use another router as Repeater (wireless), you need an Ethernet Bridge (or wireless game adapter) to the main router and connect to the secondary router. Everything can be done with a little effort. Thank you
-
WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA
Your signature says you're running snow leopard 10.6.4. If this is the case you must update to 10.6.8 in order to get the Mac App Store:
Mac OS X 10.6.8 Combo Update v1.1
You will need to upgrade to El Capitan until you can upgrade to Sierra:
https://iTunes.Apple.com/app/OS-x-El-Capitan/id1147835434?MT=12
-
last possible system on Mac Mini 1.93 GHz Intel Core 2 GB memory
last possible system on Mac Mini 1.93 GHz Intel Core 2 GB memory?
My system works very well except for Safari and Firefox, which NOW have updated versions. What is the solution? I use Snow Leopard and latest Firefox since it's 48.0.2 and Safari's 5.1.10 that I can no longer use to access certain web pages
The official list of Mac compatible with macOS Sierra:
What are the requirements for Sierra.
Towards the end of 2009 or later
- MacBook
- iMac
2010 or later
- MacBook Air
- MacBook Pro
- Mini Mac
- Mac Pro
If you do not meet the above, but respect what follows, then you can upgrade to El Capitan.
Upgrade to El Capitan
You can pass the Lion El Capitan or directly from Snow Leopard. El Capitan can be downloaded for FREE from the Mac App Store.
To upgrade to El Capitan, you must have Snow Leopard 10.6.8 or installed Lion. Download El Capitan from the App Store. Sign in with your Apple ID. El Capitan is free. The file is big enough, more than 5 GB, allow it some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
Mac that can be upgraded to OS X El Capitan
1 iMac (mid-2007 or newer) - model identifier 7.1 or later
2 MacBook (late 2008 or early 2009 or newer aluminium) - model identifier 5.1 or later
3. MacBook Pro (Mid/Late 2007 or newer)- model identifier 3.1 or later version
4 MacBook Air (late 2008 or newer)- model identifier 2.1 or later
5 mac mini (early 2009 or newer)- model identifier 3.1 or later version
6 mac Pro (Early 2008 or newer)- model identifier 3.1 or later version
7 Xserve (early 2009) - model identifier 3.1 or later version
To find the identifier of the model open system information in the Utilities folder. It is displayed in the Panel on the right.
Are my applications?
See table of application - RoaringApps compatibility
Upgrade to Lion
If your computer does not meet requirements to install the above, it can still meet the specifications to install Lion.
You can buy Lion to the Apple store. The cost is $19.99 (as it was before) plus taxes. It's a download. You will receive an email with a redemption code that you then use on the Mac App Store for download Lion. Save a copy of this installer to your download folder because Setup deletes itself at the end of the installation.
Lion system requirements
1 mac with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2 GB of memory
3 OS X 10.6.6 or later (10.6.8) recommended
4. 7 GB of available space
5. certain features require an Apple ID; conditions apply.
-
MacBook Pro 17 "middle 2010 2, 66 GHz Core i7. Problems with CPU and memory.
EtreCheck version: 3.0.5 (309)
Report generated 2016-09-26 08:52:41
Download EtreCheck from https://etrecheck.com
Time 02:19
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: No problem - just check
MacBook Pro (17-inch, mid 2010)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro6, 1
1 2.66 GHz Intel Core i7 CPU: 2 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 167
Intel HD Graphics
NVIDIA GeForce GT 330M - VRAM: 512 MB
Color LCD 1920 x 1200
OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour
SAMSUNG SSD 840 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
SSD of Macintosh (disk2) /: 998,97 (Go 117,08 free)
Storage of carrots: disk0s2 999.35 GB Online
SAMSUNG SSD 850 EVO 500 GB disk1: (500,11 GB) (Solid State - TRIM: No.)
EFI (disk1s1) < not mounted >: 210 MB
SSD500GB (disk1s2) / Volumes/SSD500GB: 499,76 GB (260 MB free)
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Built-in ISight from Apple Inc..
Mac App Store and identified developers
~/Library/LaunchAgents/com. AppBox.AppBox.plist
~/Library/application support/AppPolicy/AppBox - i-c 748931 - isn 6A4BB6B7-28E4-416D-BE5C-0AE3D10382ED
~/Library/Safari/extensions/SlickSavings.safariextz
2 unknown files found. [Check files]
/ Library/Application Support/VirtualBox
[loading] org.virtualbox.kext.VBoxDrv (5.1.6 - 2016-09-19) [Support]
[loading] org.virtualbox.kext.VBoxNetAdp (5.1.6 - 2016-09-19) [Support]
[loading] org.virtualbox.kext.VBoxNetFlt (5.1.6 - 2016-09-19) [Support]
[loading] org.virtualbox.kext.VBoxUSB (5.1.6 - 2016-09-19) [Support]
/ System/Library/Extensions
com.olympus.DSSBlockCommandsDevice [no charge] (2.0.0 - 2016-09-13) [Support]
[no charge] 8 tasks of Apple
tasks of Apple 155 [loading]
[running] Apple 76 jobs
[no charge] 45 Apple jobs
[loading] 158 jobs Apple
Apple tasks 87 [performance]
[loading] com.adobe.fpsaud.plist (2016-08-30) [Support]
[loaded] org.virtualbox.startup.plist (2016-09-19) [Support]
com.appbox.AppBox.plist [running] (2016-09-11) [Support]
[loading] com.google.keystone.agent.plist (2016-07-12) [Support]
com.spotify.webhelper.plist [running] (2016-09-18) [Support]
[loaded] org.virtualbox.vboxwebsrv.plist (2016-09-19) [Support]
Mac Fan Control application (/ Applications/Mac Fan Control.app)
iTunesHelper application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox application (/ Applications/Dropbox.app)
Silverlight: 5.1.50709.0 - SDK 10.6 (2016-09-22) [Support]
FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]
QuickTime Plugin: 7.7.3 (2016-08-12)
Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]
Default browser: 601 - SDK 10.11 (2016-08-12)
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-22)
QuickBrowse - Catalin Andrei Vasiliu - http://www.unionsoftwareonline.com (2016-04-06)
Slick savings (2015-10-03)
EverNote Web Clipper - Evernote Corp. - http://evernote.com (2016-07-23)
Flash Player (2016-08-30) [Support]
Automatic backup: YES
Volumes to back up:
Macintosh SSD: Disc size: 998,97 GB disc used: 881,89 GB
Destinations:
LaCie 2 TB TC [Local]
Total size: 2.00 TB
Total number of backups: 69
An older backup: 02/09/16 10:58
Last backup: 22/09/16 21:02
Backup disk size: too small
Backup TB 2.00 size < (disc 881,89 GB X 3)
70% callservicesd
57% findNames
20% com.apple.WebKit.WebContent (26)
accountsd 18%
com.apple.AddressBook.ContactsAccountsService 17%
Top of page process of memory: ⓘ
2.41 GB com.apple.WebKit.WebContent (26)
649 MB kernel_task
Safari of 549 MB
Mdworker (15) 238 MB
Dropbox 156MO
1.62 Go free RAM
6.37 GB used RAM (2.63 GB being cached)
Used Swap 0 B
26 September 2016, 08:49:12 self test - passed
September 2, 2016, 20:53:40 /Library/Logs/DiagnosticReports/Kernel_2016-09-02-205340_[redacted].panic [details]
On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com. LiveShoppers.agent.plist
On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com. Software - Updater.agent.plist
On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com.unionsoftwareonline.AppMonitor.plist
On 26 September 2016, 08:39:42 - / Library/LaunchAgents / com LiveShoppers.agent.plist
On 26 September 2016, 08:39:42 - Library/LaunchAgents/com. Software - Updater.agent.plist
26 September 2016, 08:39:42 - ~/Library/Safari/Extensions/Ebay Shopping Assistant.safariextz
On 26 September 2016, 08:39:42 - ~/Library/Safari/Extensions/Searchme.safariextz
What are the symptoms you experience that lead you to believe that there are problems with the CPU and the RAM (or is it storage?)?
Ciao.
-
AirPort Extreme: extend only 5 GHz network
I have a Time Capsule 802.11n (4th generation) set up to expand my WiFi network at our show in the stairs.
The WiFi hotspot, upstairs in my office, is an Airport Extreme 802.11n (5th generation).
Attached to my TV Sony is a transmitter Brightech DoublePlay HD Bluetooth 4.0, running on the band 2.4 GHz effects seriously communications on my WiFi network (demonstrated unequivocally by the device to the USB port on the TV).
If I can force time Capsule 802.11n (4th generation) in my living room to expand the WiFi network exclusively on the 5 GHz band.
I named the Base Station Airport Extreme 802.11n 5 GHz network (5th generation) and have set up time Capsule 802.11n (4th generation) in my living room to expand the 5 GHZ network named (not WiFi Dual Band network) but me uncertain whether time Capsule 802.11n (4th generation) in my living room is locked on the band of 5 GHz. is there a way to check this.
Appreciate your help, any...
WiFi performance was dreadful while listening to the sound of movie via Bluetooth head sets, take several hours to be ready to play a movie in iTunes or play will stall and plans several hours to be ready to resume. If I can lock the time Capsule 802.11n (4th generation) in my living room on the network of WiFi 5 GHz, I think I'll have the trouble of sorting.
If I can force time Capsule 802.11n (4th generation) in my living room to expand the WiFi network exclusively on the 5 GHz band.
Sorry, but no. When you extend an Apple base station, two radio stations are extended.
-
iPad 9.3.5 / / 5 GHz network is displayed but tells me bad password
Very well, I can connect with my Mac Mini and my MBA but my iPad 2 retina gives me the proverbial finger when I try to connect to this frequency. This unit can connect correctly to a network of 5 GHz and did fine on 9.3.4. Since the update, I said that my password is incorrect (which is crap, I might add). Someone knows how to fix this?
Hello. Try resetting network settings, settings > general > reset > reset network settings. Then plug again. Also try to restart, sleep until the Slide to Power Off appears, power off, then hold down again Sleed, until the Apple appears.
-
Trying to rank up to my wife computer by buying an Apple 2009 27 "IMac 3.06 GHz Core 2 Duo 1 TB 8 GB of Ram MB953LL/A - EUC... But OS10.11.6 will work with it? If this isn't the case, I need to look for something that will be.
Yes, it will be.
(144252)
-
iPhone 5 only connects very well with 5 Ghz Wifi
Hi all
After trying Beta iOS10 I 'come back' iOS9 and I discovered that my iPhone 5 will not connect very well to 2 .4GHz wireless networks. The problem is that the iPhone or do access or has a very poor connectivity, so that I can use this wifi perfectly with my iPad or Macbook.
However this iPhone connects perfectly to Wifi 5 GHz networks and works as it should.
I tried to reset, restore the default values, reinstall iOS... any suggestions?
Hello iovin80,
Thank you for using communities Support from Apple. I know having a problem connecting to the Wi - Fi on your iPhone, it's not what you expect. If I understand correctly, you cannot connect to the network 2.4 GHz Wi - Fi, but the 5 GHz channel works very well. I suggest to test it on another Wi - Fi network to see if the problem is resolved. You should also check the recommended settings to avoid any interference in the present statutes:
Potential sources of Wi - Fi and Bluetooth interference
Recommended settings for the WiFi routers and access pointsSee you soon!
-
Install Snow Leopard on iMac 2.8 GHz Quad Core i5
I just bought a refurbished 21.5 in iMac 2.8 GHz Quad Core Intel Core i5 on the Apple Store to replace an aging 21.5 in iMac 3.06 GHz Intel Core i3. The new iMac has 10 El Capitan 10.11.6 OS and the old iMac OS Snow Leopard 10.6.8.
I have old versions of Quark Xpress, Photoshop, Illustrator and Filemaker Pro on the old iMac running SL and I want to continue to use these. I am now retired and can no longer pay to upgrade.
I partitioned the HD on the new iMac and had hope install SL and migrate all my old files from the old computer. I tried to recover from a Time Machine backup since the iMac old and installation of the system from a bootable USB stick SL. None of them has allowed me to move forward.
Has anyone else tried this and succeeded? Will I have to completely erase the HD in the new computer, partition the drive, install SL on a partition and, on the other?
I've seen similar issues but no response to my problem. Real help would be appreciated.
Your mac is not designed to work in 10.6 and the operating system will prevent installation of 10.6 using the API. While this is possible through virtualization, but you will be using a 3rd party solution to do something your mac was not intended to do and any instability could be traced back to this.
-
Unable to connect 2.4 Ghz on home network
Get a message that I can't connect to my network of 2.4 GHz, but I am able to connect to the network of 5 Ghz I have Verizon FiOS and I use their Quantum gateway router. Verizon configures the router to separate systems 2.4 and 5 GHz with different names. In recent days, I noticed that I can't connect to the network 2.4 GHz. I rebooted the router a few times. I applied the 10.11.6 updated so I think that this could be linked to the who. Why go to the slower network? My printers are connected to the 2.4 GHz network and for some reason, when I go to the 5 GHz network printers go offline (this not is is when Verizon pushed update firmware to separate networks). So to print I need to switch networks. Also noticed that access to some hardware Plug devices only when I'm on the same network as them. Lots of questions here but hoping someone can help get at least my mac to back on the network of 2,4 GHz. thanks in advance.
Tom
FWIW, I also have FiOS and I have been on 5 GHz since its release. I just tried 2.5 GHz and now I can't connect to it either. Might be time for a call to Verizon.
-
Change the hard disk of 1.4 Ghz Mac Mini end of 2014
Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.
My Mac is:
Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.
So, my best regards to the community and hope for a response.
I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:
Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.
Good luck!
-
Mac stop overnite on reboot it takes up to 3 minutes with a black screen, it is a 2014 5 K 27 "4 GHZ intel i7 El Capitan
Why did you stop the iMac? Or stops?
If she will stop, you can try the search in Applications-> utilities-> Console to see if there is a message on what caused the closure.
If she is stopped, you can also see if there is a scheduled stop in the system-> power-> calendar save preferences.
Regarding the slow reboot, ensure that system-> startup disk preferences and check your boot drive is highlighted. If the padlock in the lower left corner is locked, then click it to open it before you can see if your boot drive is highlighted. If your boot drive is NOT highlighted, then click on your startup disk, and then close the startup disk system preference.
If this isn't the issue, then you can check if you have kernel 3rd party extensions, demons of 3rd party launch and/or 3rd party launch officers that slow down your boot.
If you want you can post out of EtreCheck, and someone will look at it (you can watch as well and see if you have a lot of 3rd party installed which could interfere with your startup time).
<https://discussions.apple.com/docs/DOC-6174> or <http://etrecheck.com>
Maybe you are looking for
-
Simply cancel the payment I made on my Visa for registration and download. It's all about confusion. I'm in no condition to continue playing with this situation. Just cancel the payment or my credit card for the amount paid. $35 + I'll just just anot
-
Satellite NB10t-A-101 refuses to boot from any external media
I just bought a NB10t to the United Kingdom and try to boot to a bootable USB key I noticed that the BIOS on this particular model is UEFI mode only, which, in itself, is not a problem because users can sign their own operating systems with a certifi
-
No. phones menu item smart blackBerry to enable the services of the company?
Hello... I got my storm configuration to get work through OWA email after I got it, then we have upgraded our Exchange Server and now it requires the Services of company activated for the work given to my BB email. When I go to Options/Advanced Opti
-
BlackBerry Smartphones can do shortcuts?
With the help of a BB 8530 Curve II us cellular OS v5.0. 0,337 and I would like to know if there is a way other than bookmarks shortcuts to links on the web? IE; favorite the link and then save is somehow the shortcut can be placed on my home page wi
-
Implementation of the remote access VPN IPSec using SRI 2801
Hello I tried to set up a VPN for remote access using 2801 SRI. I've been able to establish my house vpn tunnel using the DSL (behind a NAT) connection, give it SRI the IP address that is in the ip pool I configured on safety. The problem I have righ