Want 5530: Connect my 5530 want a router to talktalk

Similar Questions

• I want to use my network connection to neighbors through his router on my laptop

  I want to use my network connection to neighbors through his router on my laptop. He gave me the info to do it, I do not know where to enter it or where to go. HELP PLEASE!

  Hello

  What operating system do you work?

  You can refer to:

  http://Windows.Microsoft.com/en-us/Windows/view-connect-available-wireless-networks#1TC=Windows-7

• Windows 8 don't ask the WEP password when I try to connect to the CISCO WRT120N router

  I am trying to connect to a friends WRT120N router. I click SSID wireless routers, but never, he asks me a WEP password.

  Any help would be appreciated.

  the press right click signal bars network wanted to choose forget this network then reconnect to the network.

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• Having trouble with my internet connection through wifi. N600 router is what I think.

  I had some problems with my internet connection recently via my wireless router. I get the little triangle yellow and with the connection at different times and I can't call my local internet provider because it still works when they are open, and then it closes when they are closed. I recently bought a Google Chromecast and some think it might interfere with the connection, but I don't see how. When I reset the modem router and cable by unplugging and plug their return they sometimes get the rear connection but it's annoying not knowing when it will go off again, then come back. A few months before the connection out sometimes but not several times a day. If you need additional information such as the type IP DNS stuff I can get it. Also recently I have updated the firmware of the Netgear if that makes a difference. Thank you!

  Thanks to all who responded. I talked to my ISP and discovered that the modem was abandon the connection because he was old and he sold me a new and things work fine now. Thanks again!

• Problem connecting C4580 for a new router on OSx10.8.4

  Hello, I am unable to connect my C4580 to my router wireless replacement of Verizon DSL.  The printer works fine when connected to my MacBook via a fixed network connection USB connection.  The instructions I found tell me should I open Device Manager HP on my MacBook, and then in the drop-down information and settings , click Setup Wizard to enter the new name and network password security.  As soon as I click on Wizard configuration, Device Manager crashes and I get the following error message:

  Process: HP Setup Assistant [433]
  Path: / Applications/Hewlett-Packard / * / HP Setup Assistant.app/Contents/MacOS/HP Setup Wizard
  ID: com.hp.SetupAssistant
  Version: 2.1.3 (2.1.3)
  Code type: X 86 (native)
  Parent process: launchd [167]
  User ID: 501

  Date/time: 2013-06-23 21:02:43.998-0400
  OS version: Mac OS X 10.8.4 (12E55)
  Report Version: 10

  Interval since last report: 16562 sec
  Crashes since last report: 14
  Per-App interval since last report: 12 s
  Per-App crashes since last report: 7
  Anonymous UUID: ED6E7A2D-B328-4737-E37A-9FF6A922BFF3

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BREAKPOINT (SIGTRAP)
  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:
  "Reason for termination due to an untrapped exception"NSInvalidArgumentException"app,: ' *-[NSDictionary initWithObjects:forKeys:]: count of objects (1) differs from the number of keys (2)"

  Can someone help me with this?
  

   

  Configuration wizard does not work in this version of Mac OS X.  You must either borrow a Windows PC or a Mac with OS X 10.6, to be able to put the printer on the wireless network.  Sorry for the inconvenience.

• How to connect my PC to the router?

  New connection PC Help!

  Hi, we are changing our IPS at Virgin (connection broadband) to the warehouse Utility (router wireless connection), but I can't work out how 'connect' my PC to the router. My wife has a laptop that is already running through the router. I tried the obvious options on the control panel to connect my PC, but have failed miserably! Any ideas, please!

  Hi Eagozz,
   
  Connect the router to the computer by referring to the manufacturer's manual.
   
  Try to connect to the available wireless network. Here are some articles that might help you to do the same thing:
  To connect to an available wireless network
  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• Problems connecting to wireless G Linksys router

  I have problems with connectivity issues with my wireless router. I have a Verizon DSL modem which is wired to a Windows XP computer and the wireless router. I have a total of 3 computers wireless (1 Office XP wireless, 1 laptop Vista) and XP wireless laptop 1. For these last months, I had intermittent connection dropping issues. I tried to change the channel on the parameters 9-05:49 wireless and so on and so forth, but the only channels that work for a while are 9 and 11, but I still feel the droppings of connection. It's very frustrating and confusing especiall since the signal strength of connection seems to be good to excellent. There are moments when (very little) when the connection works very well, but 90% of the time I can't go on the internet or connect to my VPN for the job.  Any help will be appreciated. Thank you.

  Try this:

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Configuration tab change MTU size to 1300, then click on save settings...

  Click the settings advanced wireless

  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• The connection between your cable modem, router or access point, and Internet are broken.

  What is the average message "the connection between your cable modum, router or access point, and internet are broken" and how to fix it?  We use internet provider time warner.  Can I access online using mini jetpack, but not through time warner.  Is the problem with our internet service or hardware problem?

  Hello Terri,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of damaged or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Note: You can run utilities times 'Internet connection' and 'network card'.

  If this does not help, use method 2.

  Method 2:
  Reset TCP/IP and check the issue.
  Refer to this article:
  How to reset TCP/IP using the NetShell utility
  https://support.Microsoft.com/en-us/KB/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I keep strangers to connect to my network or router?

  wireless router...

  How can I keep strangers to connect to my network or router?   I continue to see one come like Belkin.678 and when I right click on it the only option is auto connect...

  How do you know that they are connecting to your wireless network?

  Where are you looking?

  You should consult your routers manual and make sure that wireless security is put in place.

  Use WPA2.

  Looks like you're just view the wireless networks that are available in the range of your router.

  It's normal.

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Laptop says that it cannot find certificate needed to connect to D.Link wireless router

  Laptop warned Validating identity when I try to connect to D.Link wireless router signals.

  If you get the error message is the one mentioned in the subject of your message, it means that you have turned on (probably unintentionally) 'corporate' wireless security type (aka 802.1 x).

  Right-click on the icon of your adapter wireless network connections, and then select Properties.

  Click the wireless networks tab.

  In the list of "Preferred networks", select the entry for your network and click on the button 'properties '.

  Click on the tab "authentication."

  Make sure the box "Enable IEEE 802. 1 x authentication for this network"is disabled.

  OK your way out.

  Restart (just in case).

• HP Photosmart Plus B210e but can't seem to connect to my Verizon Fios router

  I have the HP Photosmart Plus B210e but you are unable to connect to my Verizon Fios router which is an Actiontex M1424-WR.   The printer detects the name of the router and I enter the WEP key, but it does not connect.   The diagnoses listed without filtering status summary do NOT.   I connected to my router and checked that no MAC filtering is enabled.   I have two laptops which have no problem connecting to the router.

  OK, so a simple reboot of the router solved the problem

• Connect printer 6800 to new router

  I searched all the pages of HP and this forum and that you have not found an answer that works. I have a printer Deskjet 6840 and just had to buy a new router (linksys N750) and cannot connect to the wireless printer.

  With this model, I can't use the Setup disk because it's 2 or 3 old Windows OS systems.  I am able to connect the printer to the router via an ethernet cable and access the printer app on my PC screen via the IP address of the printer gives me.  When I try to set up the wireless as it helps me through all the steps. But it still does not connect.

  In addition, Yes to the following: the drivers are current, router works with other devices, the SSID and key that I use are correct.

  Can someone tell me the steps to do it properly please? If my printer has become obsolete, please break it to me gently.

  Sorry so late to respond. Thanks for all the suggestions. They helped indirectly.

  Turns out be the encryption mode. Thought they were both on the WPA. But the new router has been set to WPA2. The old 6800 does not WPA2.  Talk about the router crashed down to WPA and devices. We lose the ability of N. But only a last us another few months. So a good workaround solution.

  Would be not found if your suggestions is not used me in my printer configurations and router.

  Bravo for sticking with me.