Connect printer 6800 to new router

Similar Questions

• Printer wireless connected but offline with new router Xfinity

  A FIOS Actiontec router wireless, printer HP 6515 functioned well as a wireless network printer.  Just replaced FIOS with Xfinity Cisco router.  Shows printer HP 6515 as connected (print network configuration page) but both PC (Windows 7) indicate printer is in offline mode (no check mark).  Printer has set the IP address with FIOS router.  Running doctor printing & scanning HP without success.  Suggestions?  Thank you!

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Problem connecting C4580 for a new router on OSx10.8.4

  Hello, I am unable to connect my C4580 to my router wireless replacement of Verizon DSL.  The printer works fine when connected to my MacBook via a fixed network connection USB connection.  The instructions I found tell me should I open Device Manager HP on my MacBook, and then in the drop-down information and settings , click Setup Wizard to enter the new name and network password security.  As soon as I click on Wizard configuration, Device Manager crashes and I get the following error message:

  Process: HP Setup Assistant [433]
  Path: / Applications/Hewlett-Packard / * / HP Setup Assistant.app/Contents/MacOS/HP Setup Wizard
  ID: com.hp.SetupAssistant
  Version: 2.1.3 (2.1.3)
  Code type: X 86 (native)
  Parent process: launchd [167]
  User ID: 501

  Date/time: 2013-06-23 21:02:43.998-0400
  OS version: Mac OS X 10.8.4 (12E55)
  Report Version: 10

  Interval since last report: 16562 sec
  Crashes since last report: 14
  Per-App interval since last report: 12 s
  Per-App crashes since last report: 7
  Anonymous UUID: ED6E7A2D-B328-4737-E37A-9FF6A922BFF3

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BREAKPOINT (SIGTRAP)
  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:
  "Reason for termination due to an untrapped exception"NSInvalidArgumentException"app,: ' *-[NSDictionary initWithObjects:forKeys:]: count of objects (1) differs from the number of keys (2)"

  Can someone help me with this?
  

   

  Configuration wizard does not work in this version of Mac OS X.  You must either borrow a Windows PC or a Mac with OS X 10.6, to be able to put the printer on the wireless network.  Sorry for the inconvenience.

• Changed routers. Impossible to be re - connect printer HP 6988. Router is a Cisco E2500.

  Wi - Fi network includes HP Pavilion dv2700 notebook which is connected wireless for HP 6988 printer. Laptop use Win XP. Old kept router down, then, replaced by Cisco E2500 Wi - Fi. Laptop connected to the new router without any problem, but printer will not connect to the network or respond to the laptop. What should I do to make this work?

  Of course, no problem.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Start with that. Select the map North America. Then the United States. Click on drivers and software and type the name of your printer and press search. I don't know if you have the version of dt, he looks to the name if you did. If you do not, select it from the list that appears. Then select your operating system from the following list. Finally, you will see the driver-product installation software and you can select the full features software. Download and run that. Keep me updated.

  Also, very important, delete all copies of the printer from the Printers folder before new installation.

• HP Officejet Pro 8100: unable to operate a printer wireless with new router

  The HP Officejet Pro 8000 has worked successfully for a year on a home network with 3 computers wireless using an internet ATT Uverse router.  The router was changed to another new router with a different network name and the WiFi password ATT Wireless and the printer does not work wireless. The printer does not work dedicated to a single computer with a USB cable.

  Should I download and reinstall a new driver?

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• my printer does not print after a new router, I configured it but still does not

  I have a new router and configured it for my printer a Kodak ESP5250, I did all the things the computer told me to to try to resolve the problem, restart spooler ect, but it still won't print and I'm on my work please help. Thank you

  Thank you very much for your help, I was told by a friend to the support ring at Kodak who I did it remotely, they got into my computer and solved the problem, still not sure it was good. I was impressed by the response here and it was fixed in five minutes. So if anyone has a Kodak printer that does not print from the computer, but the impressions of the printer, this is the road to go down. Thanks again for your help.

• connection printer to the new laptop

  My printer is connected to the wireless network, but I try and put it on my new laptop (windows 7), that it says cannot find every time. I checked that all on the same network and they is, firewall off as well - so frustrating

  How to connect existing printer for the new laptop?

  I'm sorry you have a problem with the communication of the printer and the computer.

  Try disabling your anti-virus.

  In addition, run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03275041

  Let me know what happens.

• HP Officejet 4500 all-in-one: do not print after a new router has been installed

  I recently got a router update Verizon Wireless. I updated the password key on my devices and also assured that the printer is visible from my PC. However since the upgrade, I can't anything to print.

  I tried whole process of turning off the printer and the router and the password rentering. The PC recogize the printer but there may some disconnect somewhere that I can't make impression - help...

  Thank you!

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Must configure airprint again after a new router

  I had some problems with my internet connection, then got a new router to reset my printer to use with the new router. I was finally able to do it after a while but now not able to print from my iPad 2. I created my wireless news on the ipad so that can get online but when I try to print nothing doesn't come out. The printer comes up and I press print and he said: it's printing but then nothing. I have contacted Apple and after waiting a long time chatting with someone that told me there was nothing they could do if I need to contact HP. I have a HP Deskjet 3050 has. Now all of a sudden on the list of approved air mine printers print is not listed anymore. I told the person that I was talking about that I got the new router installed Friday and printed on Thursday. Anyone have any ideas?

  Hello lacevas,

  Welcome to the Forums of HP's Support.  I think that since the replacement of your router that your Deskjet 3050 a printer is not connected to your new wireless network, making it impossible to use your iPad AirPrint service.

  I'm sorry that you have received a certain disinformation, your Deskjet 3050 a printer supports AirPrint.  The question is, if you don't have the iPad and not a computer with Windows or Mac operating system, to get the printer connected to your new network you will need to use another method.  @Jon-W explains the alternative method, with the steps, in his post here.

  Please let me know how it goes, I want to see you make your printer connected again.

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• HP Officejet 6500 Wireless: Connecting older printer to the computer and the new router

  I've updated my router and got a new computer and cannot find a way to connect them to my old printer. I followed all the steps I learned other questions and instructions, but nothing helped.

  After having replaced the router reconnect the printer to the new wireless network?

  1. Press the Setup () button on the printer control panel.

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• HP Deskjet 3510: Printer not connected to the Internet after new router purchase.

  After buying a new router, printer does not work. Is not connected to the Internet. I followed the instructions on how to connect but nothing I did helped. Wireless test results show the printer are currently configured with an automatic IP address, I don't know why or how this happened. Also shows that wireless and wireless is working and success to the configuration of the printer, just not connected to the Internet.

  Yes you will need a printer USB cable like this.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?ie=UTF8&QID=1458167924&SR=8-1&keywords=printer+USB

• 3050 printer all-in-one - connects to the new router?

  Hello

  I just got a new router installed and since can't get my Deskjet 3050 to a wireless connection.

  I tried to go into the router setting and adding via pin and WPS button but no work

  I tried the part configuration of the HP set up in my Mac, but only crashed every time so I uninstalled the printer and re downloaded. However he now does not have as an Application, but I can still select in sub printers, but can only print via cable Wi - Fi and not

  Help - very frustrated

  Thank you

  It's weird.  Try disconnecting the power to the printer without turning off first.  Unplug the unit from the rear of the printer and omit the cable for 30 seconds.