Want to 700 * 430qe: install the cache disk on Envy 700-430qe

Similar Questions

• I can't install the second disk sata hard

  I have a problem when install the second disk sata hard
  I bought a new one 500 GB and I installed windows xp sp3
  and it works well I plugged in SATA 0 port
  When I want to install a second sata hard disk 320 on sata 1
  and it has an important data, windows will reboot, and do
  blue screen sometimes 'NTFS.sys"or"SCSIPORT.sys.
  and it is written "DRIVER_IRQL_NOT_LESS_OR_EQUAL".
  If someone help me what should I do or there is no FIX for this problem.

  in the BIOS I have regcognized both hard drivers:
  IDE pri master 500 GB
  PRI IDE slave 320
  Second master IDE-
  Second slave IDE-
  PORT SATA - 0
  SATA 1 - PORT

  I plugged the IDE 2 cd-rom

  ----------
  Specification of the device:
  Windows xp sp3
  card mother gigabyte 848P
  Intel ICH5
  Intel 8I848p775-g
  Celeron D Socket 775

  You said that the hard drives are sata but your bios recognizes them as IDE depending on your position. You might have to set your bios to operate in sata mode or enable AHCI of have recognized them as sata. Regarding the error you get, look in the system BIOS to boot from hard disk command menu. This is different from the command menu of usual starting where you choose each time you start a cd ROM or hard drive ect... The parameter that I refer to determine which hard drive of your computer starts on the first. Change to the primary master 500 GB disk > save your settings and restart your computer. Even if one is defined as main and the other slave is not serious. Some bios have the ability to choose what hard drive to boot from. In other words, it is adjustable to start first on the slave drive.

• Kickstart install the iscsi disk not found

  I can't get my order of kickstart to install the iscsi disk.

  the line

  install - firstdisk = distance does not sutable found records

  I also tried

  Installer--disk=/vmfs/devices/disks/EUI.XXXXXXXXXXXXXXXXXXXXXXXXX

  install - disk = mpx.vmhba32:C0:T0:L0

  None of them sees the iscsi drive

  But if I run the Setup manually, I don't see the iscsi drive.

  any idea?

  I think that I understand it. In cisco ucs, I had to change my font of startup and add iscsi as secondary targets.

  the policy must be

  1 LAN

  2. the ISCSI targets

  The kickstart file can always use install - firstdisk

• I want to download apps on the other disk drive not c.

  I want to download apps on the other disk drive not c.

  Are you referring to Creative Cloud products

  If so, follow the procedure below

  Open creative cloud

  Right click the gear on the top icon and open the preference

  Click the Apps tab under preferences.

  You will get the option

• Should I uninstall CS5 before installing the CS6 disk. Thank you

  Should I uninstall CS5 before installing the CS6 disk. Thank you

  Just to let you know there is no need to uninstall CS5 or any other creative suite before installing the CS6 software.

• Re: Satellite L300-10 q - cannot install the recovery disk with XP SP2

  Hello

  My laptop started giving problems (slow start & suspended inbetween) so I tried to re-installation with installation disk but recovery whaile there ask lang. & confirmation of removal of data and after the installation of minutes collapsed & turn in DOS (X :) for admin.

  When I restarted labtop it shows Bootmgr has failed.

  So I contact customer Service & they replaced the HARD drive with new, but still the same problem.

  I even tried to install XP SP2 after copying the files, it displays HARD drive not found.

  Pls help

  L300 - 10 q series

  Pls advice also how to check Windows XP is 32 or 64 bit?

  Thanks again

  Alvares

  If you try to install your laptop computer with the Microsoft installation disc, you need the SATA drivers. You can find it on the Toshiba site.
  You must load the drivers of an external floppy drive or you integrate into a new CD with nLite (www.nliteos.com).

  For the recovery disc you n t need these drivers because they are already on the disk.
  If you get the same problem with the recovery disk, you should check your disk with Drive Fitness Test (Google is your friend).

• Install the new disk on Tecra M2

  Hello

  I have a laptop Tecra M2 HARD drive abandoned a year ago and served in a drawer since I'm keen to get it up and running again, but wonder if I should buy a HDD that is specific to use in it and what is involved?

  My interpretation of it is that it's an IDE HDD that is needed, any 2.5 "IDE HDD off ebay will work or do I need to buy a specific brand, because they are not all in the United Kingdom listed for the M2.

  If a generic IDE HDD will work in the laptop (like this http://cgi.ebay.co.uk/HITACHI-30GB-IDE-ATA-PATA-2-5-LAPTOP-HARD-DRIVE-HDD_W0QQitemZ320332706439QQcmdZViewItemQQptZUK_Com puting_HardDrives_RL? hash = item320332706439 & _trksid =p3286.c0.m14&_trkparms=72%3A1300|66%3A4|65%3A12|3 9% 3 a 1 | 3A 1318 240%) are additional media required or should he just fit into the laptop?

  Then, once I inserted the HARD drive in the laptop computer and turned on, is there anything else necessary or should just be able to get to the top and running with a disc o/s?

  Thank you very much in advance for your help.

  Hello

  You are right. Tecra M2 must 2.5 IDE HARD drive and you can use it on eBay, but if you must buy new HARD drive I recommend buying the HARD disk with the largest capacity supported. Tecra HDD supports 30 GB HARD drive; 40 GB; 60 GB; 80 GB capacity.

  Tecra M2 is cute laptop and if you want to use it for a longer period of time buy 80 GB and be happy. You will have enough space to save a lot of different data.

• Problems after installing the new disk in the Satellite M70 151

  I have a Satellite M70-151 the hard drive gave up and was unreadable, before that I was using with my desktop via a router, that it worked very well. I had no option but to install a new hard drive now in System Manager, I get of the yellow question marks against:
  Other features:
  ? Mass storage controller
  ? Network controller
  ? Modem PCI
  ? Video controller (VGA compatible)

  I searched and searched, but can not find the drivers for these 4 things

  I have sound but only weak, I don't have a WiFi Yes feature I tried to install the good (as advised by Toshiba) Lan Driver [link to driver | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=58122&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8]

  When I try to install it says "the device may not be present or could have been ejected/disconnected from the system.
  Insert or reinsert now. "
  I know I am being thick but I was under the impression that the Lan has been integrated into the laptop? :_|

  I would be sincerely grateful for all of the advice of my peers. :)

  Stuart

  First of all, we should start with basic information;
  The M70-151 Sat belongs to the series of PSM71E that's why you should choose this issue of the European driver Toshiba page if you want to download the correct drivers.

  _You will need these drivers: _

  Mass storage controller I think it is a cardbus driver
  Controller - s network a LAN or WLan card computing. First, check which driver is already installed
  Modem PCI driver modem ;)
  Display video Controller (VGA compatible) driver

  Greetings

• How to install the dynamic disk volume and base set

  I have 500 GB of HARD drive.

  How can I convert a 1 and 2 in basic and volume 3 in Dynamics.

  Please tell me something that is free of cost, and I don't want to use a software to do this.

  Hi Lynda,

  I'll be happy to help you with the problem you have with the computer.

  To create a dynamic disk volume, you must convert basic dynamic first of all disks. How to convert the basic dynamic disk?

  1. connect you as an administrator or as a member of the Administrators group.

  2. right click on my computer > manage > storage > disk management.

  3. in the lower pane, right-click the basic disk you want to convert, and then click on convert to dynamic disk. You must right-click the gray area that contains the title of the disk on the left side of the details pane.

  Warning: After you convert a disk from a dynamic disk basic, local access to the dynamic disk is limited to editions of Windows Windows 2000 at the latest. In addition, after you convert a disk from basic to dynamic disk, the dynamic volumes cannot be changed to partitions. You must first delete all dynamic volumes on the disk and then convert the dynamic disk to Basic.

  Thank you.

• Is it possible to install the second disk in Satellite A300-15 a PSAJ4E

  Hello!

  I just bought Satellite A300-15A (PSAJ4E).
  I read in some reviews that these models have an empty space for an additional HARD drive, but that some models do not have an additional connector for a second HDD.

  I wonder if it is possible to install the second HARD drive in my A300-15 has.

  Thank you!

  Hello Ivo

  To be clear: A300 laptop come with a few different hardware configurations. Some of them with one and some of them with two hard drives. The plastic case is the same for all models of laptops and you can find room for the second HARD drive, but the motherboard is not the same and not stretch with the second HARD drive.

  Remove the cover from the HARD drive to the second HARD drive and let us know if the HARD drive connector is available.
  I'm sure that there is no connector.

• "do you want to download and install the software" hp photosmart c4200 series '? "

  I get this message on my mac running update 10.8.1 Mountain Lion - Software does not help. It printed correctly on 10.7. I can still access the parser. Any ideas?

  Hello

  Be sure to restart the MAc and Champagne for any change.

  If this help not try to reset the system pritning and then add the printer:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
  
  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the sign more and try to add the printer again.

  IF none of the steps above tdoes not solve the problem download and install the package below:

  http://support.Apple.com/kb/DL907

  Once installation is complete, open the system preferences > print & Scan and add the printer again.

  Thus also ensure the printer directly connected to the Mac, not by the bias of the USB or extention and a USB hub is not longer than 2 - 3 m long.

  Please let me know if any other problem,

  Shlomi

• Want 4524: Impossible to install the software

  Hello

  I recently acquired the HP Envy 4524 printer, I have set up on my WiFi network and printed from my iPhone and iPad with AirPrint and even printed my Mac using the printer set up as a printer AirPrint.  I would like to install the driver of HP printer with the HP Easy Scan software so I am able to scan and have more control over the printer that I can with AirPrint.

  I tried to use the HP Easy Start software, but it was not easy at all.  I went through the process and everything was good until I got to the part "Download and install the software" installation and I get a message saying "unable to install the software.  Try again later. »

  Is it a temporary problem at the end of HP?

  Thank you

  Fred.

  Hi @JZjr,

  Welcome to the HP Forums!

  I see that you have trouble to install your HP Envy 4524 on Mac OS X 10.11 El Capitan. I'm happy to help you!

  For this printer, there is no full feature software and drivers directly from HP for Mac OS X 10.11 El Capitan. This printer can use the built-in driver directly from Apple, which is installed by using the Apple update. According to this document, OS X v10.11 v10.10 compatible printers.

  I recommend you to go through this guide, installation of a printer Mac driver by using Apple Software Update. Or, if you need to download the driver manually, you can do it on this website, HP v3.1 for OS X printer drivers.

  Then you scan using one of the methods in this post, Re: iMac OS X 10.9.3 Scan for iMac driver for HP OfficeJet Pro 8500 a A910a does not appear to be, by my colleague @Sunshyn2005. (These options works with this printer on Mac OS X 10.11 El Capitan).

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this information is useful and thanks for posting!

• Want 5540: Impossible to activate the computer Scan: 5540 Envy, MacOS 10.12

  I tried to activate the Scan of the computer using the HP utility application settings. I received the message (in part), "HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest software recommended HP... ».

  I then proceeded to the HP website and downloaded the appropriate firmware update. When running the executable, I received the message (in part) "device is in an error state and cannot be flashed because of this... »

  NB., we have been able to print using this printer, Wi - Fi, easily, since the purchase and installation on 28/08/16. No problem. In addition, using the * Apple * settings, by selecting 'Printers and Scanners' and going through the routine of "Scan", I can acquire a successful analysis (placed in "jpg" format in the 'Images' folder).

  I'm so concerned - very disappointed - as to why I can't activate and use the "Scan to computer" utility from HP. It does not work from the laptop computer side or from the printer control panel.

  Advice?

  Hello
  If you have HP scanning or a previous version of HP Easy Scan in the Applications folder or HP subfolder, delete it by moving it to the trash, and then empty the trash.
  
  Install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• After installing the new disk hard Windows XP tells me that I have to reactivate.

  original title: problem after the activation of the product
  I put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if I close Yes it says it is already activated and when I click ok it reboots the computer

  I put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if I close Yes it says it is already activated and when I click ok it reboots the computer

  Start in safe mode, install SP2, SP3 install.

  Reboot in normal mode, it should work. I think that it maybe an old cd rather than the last version supplied with certificate of authenticity.

  Cheers (mine works now)

  TDI

• control of cyclic redundancy check when you try to install the specific disk

  I installed it now mainly music programs of this pile of disc of times with no probs, I get the error message "data error (cyclic redundancy check)" on all the programs on this disc, when I put the disc in the drive of my pc seems to be a bit slower than normal too. one of the programs is fruityloops 8, if I click on install, but click on fruityloops 8 engine I get ' ZipMsgXX.res is probably not related to the executable string ID missing is 11036' as I have 6 fruity, I thought that it could install using Installer 6 fruity but it wont... someone help...

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/822798

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/data-error-cyclic-redundancy-check-and-disc-is-not/76989c0f-E06C-E011-8dfc-68b599b31bf5

  It will be useful.