Want to tilt 27 TSAIO K-150xt: error blue screen of death StopCode

Similar Questions

• Satellite A300D-1EI - error blue screen display - drivers did not have

  I bought my laptop about a month ago.
  Everything is working great except two errors 'blue screen' caused by the graphics card.

  Both were when the laptop was connected to the TV via the S-video port.
  First was when the computer screen turns off after 15 minutes while watching a movie on resume says that the display drivers did not have, and then I got the blue screen. Then I updated the site Web of ATI display drivers and set the computer screen goes out.

  All were ok with no problems, until last night when I got another message that the display drivers did not follow a blue screen.

  I wonder if this is problem to drive or there is a problem with my graphics card.

  System information:
  Processor: Intel Core 2 Duo T8400 CPU @ 2.26 GHz
  Memory (RAM live): 3.00 GB
  System type: 32-bit Windows Vista Edition Home Premium
  Graphics card: ATI Mobility Radeon HD 3470

  If long you use ATI driver ATI support page it is not possible to say anything on this subject.
  This driver is not tested and Toshiba does not offer any help on this matter.

  So what you can do is to install OS using recovery media and see what will happen in the future. Please test extensively with the own operating system preinstalled. Do not install anything that can have some negative influence this game or additional applications, codecs or something similar.

  Test it please and tell us if the problem persists.

  When you want to watch movies on television in the first passage to the TV and then start the DVD player.

• Blue screen of death: stop error: 0X000000CE

  Hi, I think I got a bad virus on my computer that's all waste.  First of all, it all started when I clicked on a link, while the Christmas on Black Friday shopping. Then I got a download of unwanted software, called system difficulty, (the small icon of Windows) I could not use system restore to remove, whenever I tried to use it, it says cannot restore on this point. Tried several other points, but no joy. Can I get the dreaded blue screen of death with a stop error: 0x0000008e (0xc0000005, 0x804f8e80, 0xef76aa98, 0x00000000). Could sail in safe mode and tried to fix it with antivirus software, found 26, abducted, ran spybot search and destroy, found nothing. Still no joy. So today, I tried to start in safe mode, and it does not work in safe mode, guard reboot again and again. Then I hit F8 and turned restart turned off so I could see the Blue error screen that would flash for just a second, and now I have this stop error message: 0x000000ce (0xf88be6dc, 0 x 00000000, 0 x 00000000, 0xf88be6dc). I read forums on video and all drivers, but this happened just after I clicked on this link and got the virus with this unwanted software download. Anyone got any suggestions on how to solve this problem? Oh and I downloaded a program called error repair of my other computer and installed but it only scan my computer to find errors and then he wants to buy you the pack premium, so that did not help. It's my computer business running windows xp pro service pack 3. Wish it would have been on this cause she has the system recovery and it worked whenever I had a virus, I couldn't get rid of that. Thank you, Steve

  JoseIbarra is the expert resident on the Recovery Console and chkdsk/r. I'll track down his instructions. If the malware is responsible for the BSOD, I do not think that chkdsk /r will help, but it won't hurt. Or you might need to repair your boot.ini file.

  DEFINITELY get this brand XP reinstallation CD Dell! You can use it to perform a clean installation of XP or a repair installation of XP (chances are, you won't ever need to perform a repair installation, but it is nice to have this option) or to enter the Recovery Console to perform functions such as chkdsk/r.
  Chances are that your data does not fit on one CD! Depending on what you have, you might need to up to 100 CDs or more! Better to buy an external hard drive. Newegg.com has a very good selection of the most affordable. Here is an example:
  http://www.Newegg.com/product/product.aspx?item=N82E16822148409
  Creating a Ubuntu CD bootable 'live' (and then startup out of it, rather than on your hard drive) will allow you to copy your data to the external hard drive:
  https://help.Ubuntu.com/community/LiveCD
  There are also some other CD bootable antivirus (like Avira) which may help you:
  http://www.livecdlist.com/purpose/Windows-antivirus
  Here is a link to the instructions of Jose:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

• How can I fix stop error (blue screen) occurs whenever I try to open a link of U-Tube? I am running Windows XP.

  Whenever I receive an email containing a link to U-Tube, or try to connect to a position of U-Tube by link via my browser, it starts to open up and then freezes. The computer shuts down after briefly showing a blue error screen.

  This happens if the browser is IE, Firefox, Google, or Google Chrome.
  I tried the system restore, but it will not go to any control point before this event began, about four weeks ago.
  I also tried Mats_Run.Codec.exe, MS Automated Troubleshooting service, nothing helps.

  You would get further faster and with less effort, if we know a little more about your system and you can eliminate the 'try' things.

  What is your system brand and model?

  What is your version of XP and the Service Pack?

  You will always be to 'catch' the BSOD if you do this:

  XP is configured to restart automatically on some system failures, you will need to disable this feature for the information of the blue screen of death (BSOD) will remain on the screen for you to see.

  You must also configure XP to create a memory for each BSOD dump file, so you'll have a crash dump file to watch later if debugging more is necessary.

  If your system crashes later, the information you need will always be on the screen and then you can use the information in the dump files memory to understand what the problem is and fix it.

  Disable automatic restart in case of system error

  XP restarts on system failure, so automatically configure your system so it does not, then you can see the error message.

  Configure your system does not automatically restart on system failure

  Right click my computer, properties, advanced, startup and recovery settings.

  In the system failure section:

  Put a check mark in the box "write an event to the system log.
  Put a check mark in the box "send an administrative alert.
  Uncheck 'automatically restart '.

  In the Write debugging information section select:

  Partial dump (64 KB)

  Set the directory small dumpster:

  %SystemRoot%\Minidump

  Click OK, OK.

  Restart your computer.

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  This sounds like a video driver issue, so we can see what you have for your system, audio and video drivers.

  If you need help to know what your video driver and audio situation, and where to get possible improvements to your video and sound drivers, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  For more audio information, expand components, click on Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  If you want to get more information on your BSOD, follow these steps:

  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).

• Error blue screen 1033

  I just got "Blue screen" error 1033 yesterday. Since then, whenever I start my computer, I get a message that says windows cannot be started because he has recovered from an unexpected shutdown down. ... then it asks me if I want to fix the system. I answered 'yes' and he tries to repair... I this had tried repeatedly but failed and even tried to run some restorations system at different points in a week earlier, but not working anymore.  Here is the signature of the problem as follows:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.11

  Locale ID: 1033

  More information about the problem:

  BCCode: 1000007e

  BCP1:                                                  C0000005

  BCP2:                                                  82EF6C50

  BCP3:                                                  89327B4C

  BCP4:                                                  89327730

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\072512-23696-01.dmp

  C:\Users\Daddy\AppData\Local\Temp\WER-215312-0.SysData.XML

  A question I have, is what causes this problem?

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• Blue screen of death or :( Your PC has encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. Error on Windows 8

  I read my threads where people are facing this error blue screen dead on Windows 8, the cases are different but this error message is the same, I share picture of the error message, it looks like this.

  

  My case

  In my case when I turn the laptop for the first time it freezes, displays this error message and restarts normally. On the home screen, it shows me a message send this problem to Microsoft. Laptop works very well subsequently without any problem, even if I reboot later it loads fine, but if I stopped and starts from at the moment, it shows same error screen. When I look into the details, it shows me these details. draw the image.

  

  I did it as a result of things to understand the issue:

  • I thought it's a software problem, so I format my windows disk and reinstall Windows8 - the issue has not been resolved.
  • One of my friends suggested me for a complete format, I moved my data to external HARD disk, formatted my entire drive, deleted partitions, make new partitions and installed Windows 8 - the issue has not been resolved.
  • Someone suggested from material with my HDD to check it out, so I used a different HARD drive, formatted, deleted partitions, made new partitions and installed Windows 8 - the problem persists.
  • Restore all settings to the default BIOS - the problem persists.
  • I have connected HDD my friend with Windows 7 to check my machine and it worked fine.

  In my research, I can't understand what is really the cause of this accident, there would not be any software parameter or virus as on formatting windows that all this problem would have been solved. It is not the HARD drive for sure as I have done everything I know to see if it's the HARD drive that is causing the problem.

  Dear members and experts from Microsoft, this is the first time I participate on this forum and think that I explained everything concerning the problem I face and the research I did to solve this problem, I eventually failed, please guide me how I can solve it. My laptop is out of warranty and I don't want to pay for something that I do not know exactly.

  Waiting for your expert advice.

  Frébault

  These related to the amd_sata.sys AHCI Advanced Micro Devices 1.2 device driver. Update to win 8.1 should solve this problem.  If it isn't, you should check for motherboard update update BIOS and drivers.

  

• Vista workaround to access restore partition of the system (0xc0000C1F5 Blue Screen of Death error)

  Stats:

  Computer type: HP-Pavilion a6333w

  Product #: KC746AA #ABA

  Operating system: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_ldr.071023 - 1545)

  Processor: AMD Athlon (TM) 64 X 2 processor Dual Core 4800 + (2 CPUs), ~2.5GHz

  Disk space: 500 GB

  RAM: 3 GB

  Graphics card: NVIDIA GeForce 6150SE nForce 430 <-integrated on the mother board.

  ---------------------------

  Location: Try to update Windows Vista SP1 my computer hung up.  After a cold reboot, I got a BSoD (blue screen of death) with the error 0x0000C1F5 code.

  Current problem: whenever I try to boot Vista I get the same error during the vista loading screen.

  I tried the safe mode, the last correct log on the thing, and even a system restore disc that I downloaded from PC World.

  None of these online solutions have worked.

  ---------------------------

  Is there a way to bypass the default loading process and access the recovery partition drive to do a factory reset?

  If there is a way to save the info on my HD it please let me know.

  Thanks, Jcubed.

  Message edited by Jcubed on 11/12/2008 18:06

  I think the (BugCheck Code) code is 0x0000C1F5, and there's a Microsoft Hotfix for this:

  http://support.Microsoft.com/kb/946084

• Satellite L450D-128: how to fix intermittent errors blue screen Crash?

  My computer suffered several errors blue screen for a month, and I need help to fix it. I've already posted this question on the forums of Windows 7, but received no reply and therefore no help.

  I use a Satellite L450D-128. I installed Windows 7 Home Premium 64-bit.
  According to the .dmp files, most of the accidents were caused by the ntoskrnl.exe file that is part of the windows OS.

  Can someone tell me the best way to look at/fix this file?

  Hello

  The ntoskrnl.exe seems to be part of the kernel to boot Microsoft.
  In my view this file or this process should not create a BSOD
  Have you checked if the new installation of the OS could solve this problem?

  Given that the BSOD may be linked to serious problems or hardware problem
  Therefore, you should try new fresh OS installation to check if the system is not affected
  Otherwise I recommend that you check the RAM modules (perhaps running a memtest86 +)

  What do you think of this?

• Satellite L505-13W shows error blue screen

  My error on blue screen shows computer laptop SATELLITE L505-13W.
  The operating system is started and after some time, it shows a blue screen error and restarts.

  Even after repair successful when restarting requested repair, he showed the same error.
  So I tried to recover with the recovery cd, but it turned out to be a tragedy.

  He eraced my complete HDD to stone age and smiled saying recovery is not possible.

  Please help me...

  Hello

  If the laptop can not be recovered using the recovery disc, then it feels the hardware problem.
  Are you sure that your recovery disc is OK?
  Have you tried to install the OS using another installation disc?

  Perhaps it would be useful to check if the problem could be related to defective recovery disk, but if the BSOD (blue screen of death) appeared before the installation of the OS, I would say that the problem can be caused by an internal hardware malfunction

  It would be necessary to check the modules of RAM and HARD drive.
  HARD drive can be verified by using the diagnostic software from disk as Drive Fitness Test (freeware)

  RAM could be checked with a tool like memtest, but you need a system to market, then in this case, you can not check the RAM using a software that I recommend to remove a module and test the laptop using a module in each slot

• Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  [Moved from Virus & Malware]

  In case you see something similar...

  

  (photo source: https://malwaretips.com/blogs/remove-debug-malware-error-895-system-32-exe-failure-popup/ )

  ... you can normally just use the Task Manager to exit your browser (' end task'), and the pop-up should be gone. Please visit: http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_scanning/potential-malware-blue-screen-with-dialog-box-on/3569bb1b-c05e-4247-98dc-6bf22da581e0

• installing windows home server stop error blue screen 0x0000007b

  I want to install Windows Home server on a processor intel DH57JG motherboard with a processor Intel i5 650 CPU and 4 GB of Ram Kingston.

  I have 4 2 TB Samsung than hard drives in raid 5
  To make the bootable Raid 5 I partitioned into 2 drives the first being under the 2047 GB.
  The first part of the installation went well until I asked the question of f6.
  I downloaded the driver diskette file required to Intelbut she is 3 years old and says nothing on my motherboard.
  Ignore this as I get the Blue Screen of Death with the above Stop message.
  Any ideas anyone

  Hello

  Since your question involves the use of Windows Home Server please join the Windows Home Server Support Forums. They specialize in THIS type of environment Pro and will be better suited to help you.

  Windows Home Server Forums
  http://social.Microsoft.com/forums/en/whshardware/threads

• Kernel_Data_Inpage_Error error blue screen

  Original title: recently, our PC had blue screen errors

  We have tried to update the BIOS, but we always get the Kernel_Data_Inpage_Error.  What else can we try?

  Hello

  1. are you able to boot to the desktop?

  2. when exactly you get this blue screen error?

  When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

  For more information on the reading of the memory dump files, see the following article:

  How read partial memory dump files that Windows creates for debugging

  Resolution:

  Error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.

  Use the check disk command for all errors on the hard drive.

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

  Use the drive control as follows:

  (a) click Start.

  (b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".

  (c) type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.

  (d) then type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.

  NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  You can check the link below for more details - mentioned
  http://msdn.Microsoft.com/en-us/library/ms793989.aspx

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Blue Screen of Death - message of STOP ERROR 0x0000C1F5

  Hello

  I had problems with my laptop. I can't have in windows, and I'm still stuck on the blue screen.

  What I tried to do:

  -Google various techniques of dealing with the blue screen. Which most mentions by pressing F8 to enter safe mode, it which didn't work.

  -Tried to use the (future shop) recovery disk that came with the laptop, which has also not helped me.

  This technical information:

  STOP: 0X0000C1F5 (0X00000000, 0X00000000, 0X00000000)

  Any help would be appreciated.

  original title: Blue Screen of Death

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.