WAP11 - no assinged network using WEP address

Similar Questions

• Connectivity limited or no WAP11 when using WEP

  Configure my wifi network with a former BEFSR41 router and WAP11 wireless access point. Have laptop with XP Pro that connects perfectly without encryption, but whenever I try to use WEP I get the error "no or limited connectivity.  When you are prompted, I type in the same password as the one I used for 128-bit WEP encryption while creating the WAP11 to my network. Am I missing a step?

  Thank you

  LC

  Hello. Welcome to the community forums at the homepage of Cisco.

  Here's my suggestion: try to generate the keys with the password you are using. You do on WAP. Then use the keys on your phone, rather than the password.

  I hope this helps.

• "Another device on the network use my ip address".

  I tried to check my mail and could not and got this message "another device on the network use the IP address of your computer." I have never seen it before. He also said that I could change the IP address, if I continued to have problems. I bought this iMac and used Migration to transfer all the stuff from my old iMac that is still used. That was months ago, but I never had this message up to now. So should I change one of the IP addresses? And if so, how is that done?

  http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-Compu ters-ip-address.

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.

• internal web server access to the content of the network using the public ip address

  Hi, I saw similar topics, but not a clear answer about it. I have a PIX 515e with two interfaces, a web server internal (ip 192.168.0.5) and internal users want to access the server by its (99.99.99.9) ie public ip address is not using DNS. Tried the command alias ' alias (inside) 99.99.99.9 192.168.0.5 "but does not work for http. I can access the server on the local network using the public address for smtp, pop3 and ftp with or without command alias, but not the http service. Any idea?

  a few quick comments.

  a function of the command "alias" is to force the pix to manipulate the dns response. However, you mentioned that you didn't use dns.

  'alias' command will also force the pix to send traffic to 192.168.0.5 when it receives a packet from the inside and intended to be 99.99.99.9. However, since the host and the server are located in the same segment, i.e. pix must re - route the packet to the inside interface, and this operation is not supported with pix v6.x.

  In addition, you mentioned the inside host can access the smtp, pop3 and ftp using 99.99.99.9. This is interesting because the host of 192.168.0.0 would not directly have access to the host of 99.99.99.x without router.

• I can't do the network wireless hp 7500 to connect. I use wep-64 and shared.

  I can't network hp Officejet 7500 wireless to connect. I use wep-64 and shared.

  I have 7 systems properly using this configuration. 2 printers, 1 office, 1 router and 3 laptops).

  Well first of all, given that the printer is on a network, you need not to share.  All computers can simply install a network printer.

• I cann't get the network wireless hp 7500 to connect. I use wep-64 and shared.

  I cannt get the network wireless hp 7500 to connect. I use wep-64 and shared.

  I'm glad it's working for you now.

  Thank you to inform the community that has solved the problem.

• the IP address of the MGT network used in the interface of BVI1

  We strive to implement the autonomous AP using mgt address in the BVI1 interface, but without success.

  Would appreciate another set of eyes looking at it.

  The client authenticates with server radius very well but no IP address is assigned to the customer.

  pass us the IP helper on our IVR L3 address for vlan 57 and vlan 54 the vlan mgt.

  All our other standalones have the ip address of BVI1 in the same vlan as the VLAN of the customer.

  The config is attached.

  The switch for the port configuration is the following:

  interface GigabitEthernet0/45
  switchport trunk encapsulation dot1q
  switchport trunk vlan native 54
  switchport trunk allowed vlan 54,56,57,103,106
  switchport mode trunk
  events-the link status logging
  inline static power

  VLAN 54 is the vlan mgt in use for all other devices. We just never tried to use it for AP before this attempt.

  You can also add this command:

   interface Dot11Radio0.54 encapsulation dot1Q 54

  See the configuration guide for basic here:

  http://rscciew.WordPress.com/2014/05/24/multiple-SSID-configurations-on-...

  http://mrncciew.com/2013/11/14/autonomous-AP-with-external-RADIUS/

  Concerning

  Remember messages useful rates

• I couldn't use the search bar on google, but I get results if I use internet explore w/google or use the address bar.

  Today, I was unable to obtain results when I put a topic into the google search bar. However, if I use the address bar it will work and I eventually switched to internet explore and was able to get results in the google search bar.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Satellite Pro 4600: when I use WEP, I can't do any connection more

  Hey everybody,

  When I connect my Tohsiba Satellite Pro 4600 via map of build-in network without WEP wireless to an AP, there is no problem, connection is establische and everything works fine.
  When I use WEP, I can't do any connection more.
  Is there a solution to use encryption WEP 128 bit on a portable Thosiba Pro 4600 with build-in WIFI network.

  Thanks in advance
  Pokettuk

  What card WLan do you use?

  As far as I know the laptop must be equipped with LAN Wireless / WiFi Standard: 802. 11B ORiNOCO Mini PCI card.
  This card supports WEP 64 or 128 RC4 security.

  Everything looks like you WLan card doesn't support the same standards of security as your WLan router. You must understand that this WLan card is an oldie about 7 years.

  I think that the best solution is to use external USB WLAN which support the latest encryption standards

  Good bye

• Browser of network (over ip addresses)

  Does anyone know of a network browser Android who don't use ip addresses but can actually determine and work with host names. For most people, their networks have a DHCP server so the IP addresses are assigned dynamically, an ip address is not only obscure but will change with time.

  It is a common problem of Linux but Nautilus on Ubuntu Linux handles quite well. Linux command nmblookup can retrieve an ip address of a host name. Is there an application better than AndroXplorer or ES File Explorer ?

  Even for lending money?

  
  

• Can I turn on my computer and other devices to use WEP and how?

  I need to be able to use WEP security to play on a wi - fi on my DS. However, when I want to use my laptop WEP won't connect just about. Is there a way to be able to use WEP, without my laptop completely reject?

  Hi CloudheartBlazard,

  See the following WEP information article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  I hope this helps!

• VDI connect to the virtual computer with multiple NICs, use wrong address

  Strange question, we are the double of a VM to autoguiding.  Each NIC is on a different network, and it works very well.  Except when you sign out of the VM with a zero client.  If both network adapters is enabled through the vsphere, zero client the client tries to connect to the virtual machine using a wrong address.  He will try to use the address 172.16.x.x, but the life of the virtual machine and is stored on 192.168.x.x network.  Is there a way to make the NETWORK on 192.168.x.x address network card that zero the client tries to connect?

  Using the network-> Advanced-> advanced-> tab connections maps and links, move the 192.168.x.x network adapter to the top of the list of connections.

  Linjo

• Mail has stopped allowing me to use Group addresses

  I'm under El Cap 10.11.6.

  Mail left allowing me to use Group addresses. I tried manually, type the group name in the address bar, add the group by using the + function and click and drag.

  When I use the + function, the group is displayed but cannot be selected.

  What is the solution?

  Plot thickens: when I manually add recipients to the BCC line, the email will send but is never received by anyone on any address line.

  I sent from iPad and a Mac, same result. question about iCloud?

• Could not find ' subject: accidents using the address bar

  My question is with Firefox (35.0.1) constantly crashing, I try to find my submitted incident reports but could not find ' subject: accidents using the address as directed by Mozilla bar. I type "subject: accidents and end up with 'the address is not valid'." My browser crashed between 25 to 30 times in the last 6 days, I presented reports every time and 6 times, I also introduced my address to receive a response, none was forthcoming.
  Home PC is used by a few of us, while the children use their own laptop computer, to save time logging in and out, each of us using another browser. Nobody in our family has problems with IE or Chrome on the PC at home, nor children. The only person to have problems is the poor SAP who drew the short straw - me.

  I can a fair bit of advice? During my research, these constant crashes, I see that many, many others have had the same problem and for quite a few years apparently. Should I just accept that this is part of the use of Firefox and don't forget to take some Valium drops in my tea before logon? or perhaps the healthier choice, find a.n.other browser and move everything out there?
  I wonder Auto Add info and willingness, but understand that I do not use the Firefox browser to do this now because he planted just - seriously.

  Hello type about: crashes without an empty space (on: crashes)

  Thank you