WARNING: Arvato Digital Services will NOT ANSWER MY REQUEST of REFUND. BEWARE!

Similar Questions

• Windows Search service will not work.

  Windows Search service will not work. In the event log, it says "Windows Search service terminated with service specific error %-2147218174.

  Hi Russ,

  1. When was the last time it was working fine?
  2. Did you the latest changes on the computer?
  3. You are able to start the service manually?

  I suggest that you try manually start the service Windows search and check if it works.

  (a) click Start type services.msc in the search box, and then click OK.

  (b) in the Services (Local) list, right-click Windows Search, and then click Properties.

  (c) if the drop-down list Startup type is set to the value off, select Automaticfrom the drop-down list Startup type and then click OK.

  (d) click thefile menu and then click exit.

  If fails it above step then check out the link below and run the fixit from microsoft tool available.

  Windows search does not work and the search is slow or stops

  http://support.Microsoft.com/mats/windows_search/en-us?EntryPoint=lightbox

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• Arvato Digital Services

  I bought a DVD of backup Windows 8 of Arvato Digital Services 24/01/2013.  They sent me on 28/01/2013, that they were shipped, but I don't him have not yet received.  I sent 3 times to try to get a USPS tracking unsuccessfully number.  I can't find a phone number for support.  What can I do?

  I had the same problem in November of last year, ordered the DVD backup, and it never happened. I called the Microsoft store and explained my problem, they had the backup DVD delivered, problem solved.

  MS Store: http://www.microsoftstore.com/store/msstore/DisplayHomePage

  J W Stuart: http://www.pagestart.com

• Trying to get into my email account but the customer service will not recognize me as owner, have no cell phone, have the right password and have used it several times.

  , customer service will not recognize me as owner, have no cell phone, have the rite pass it used several times

  original title: How can I get my email account

  Hello

  Which email service provider?

  If you use hotmail or Windows Live account, you can post your request in the Forum Windows Live for other assistance or contact offer your e-mail service.

  In the Windows Live Forum

• SPA-3102 PSTN idle status, will not answer but watch sounds.

  Greetings,

  I am a complete newbie in the world of voip. I have an spa3102 and a computer virtual trixbox. When I use my softphone to compose, it makes to the spa3102 (shows the id of the last and gives a status of the appellant voip 'reply') but I get an "all circuits are busy now" and does not change the status of IDLE pstn. It also will not answer the phone for incoming calls to the PSTN.

  Outgoing stuff could be a problem of numbering plan (don't know not just guessing) here it is:

  (S0:xx. <@gw0>)

  I tried the regular (or default) (xx).

  incoming calls are supposed to go to a handset on my desk, for example ext 101 is the dial plan: (S0:101@internalip)

  I can't see the forest for the trees. Can someone give me some advice on where to look. I'm completely puzzled by something non-response externally, and why I get a all circuits are busy if there are inactive on the status page.

  an interesting note: If line1 is connected to an analog phone, it will dial a number, but always shows failover for a reason any...

  Thank you very much!!!

  Greetings!

  Thanks for the reply. I do not know if I explained properly (sounds like I don't have). I have a trixbox and I use the SPA in interface with my RTC and I want to have a fax machine (but later) on the FXS port. The problem I have is that I could not field calls to the collection. They would just ring and ring. I thought it was a dial plan (and hope it was not a hardware problem), but he just wouldn't answer the phone. He would show 'Ringing' like the PSTN status, but Voip would be "IDLE". I've been pouring through the guide of the administrator, forum messages for about 2 weeks now.

  But I didn't know what the problem was. The spa3102 is waiting until she can establish a connection (with the internal phone system) until it meets the PSTN. This is why it continues to ring. The problem why it shows it is inactive and (even with enabled full logging to a syslog box) no traffic to SIP the trixbox internal... because I had the port internal plugged in... not the WAN port (or internet). Thats right... silly me...

  I gave the wan port an address on the same subnet and moved the cable to it, once I could talk to her I change address internal to something even not on my network (if no routing problem) and left the network adapter disconnected (internal nic). Then I changed the wan to the old internal address address (trix trunk was already configured in this ip address anyway...) and PRESTO! I tried calling the number RTC and started to receive log entries showing the sip signaling and he's trying to route the call to the box of trix. It works now! So he was not answering the phone in my case, because it could not connect to the pbx or the ip phone and that because I don't use the WAN/INTERNET port on my SPA. Something I don't remember seeing in the textbooks as a "hafto' or a 'must '... I might have forgotten that of course, but I don't remember seeing him there.

  So if you enable logging, and then call this number (I used the PuTTY and 'tail-f /var/log/spa3102.log"to see the entries that they light up the box of syslog) and you don't see any sip traffic, it could be that you must use the WAN/INTERNET port instead of the internal port apparently logical... BE sure THAT ENABLE YOU REMOTE ADMIN if you decide to give it a shot.

  Also you can do the spa to answer the phone, even if it has no where to send the call (or if you want incoming people to use a PIN) on the GATEWAY PSTN - VOIP, there is a setting "off hook during the VOIP call" (default = no), but change that Yes - he would answer... and then sit there... If I had a PIN with a dial plan that is associated with this would give a fast busy after the entry of the PIN. BUT now everything is cool!

  Thank you!

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• Adobe Digital Editions will not activate with too many activation error

  Adobe Digital Editions will not be activated with too many activation error.  Technical support refused to help.  What can I do?

  To reset the client contact activation support cat https://helpx.adobe.com/contact.html?step=ADE_adobe-id-signing-in_stillNeedHelp and ask for the reset of the adobe ID.

• Colud not answer your request because photoshop does not support video on this version of windows, what can I do

  Colud not answer your request because photoshop does not support video on this version of windows, what can I do

  Upgrade to a newer version of Windows, or find a program that will run on the old Windows software.

• Cannot open links in Skype, WLM or saved HTML (Firefox will not answer)

  "I can't open links in conversation Windows Skype in a Firefox session running in the background, it flashes only the window borders. If I close Firefox and click on the Firefox links automatically open the link, but not everything with a session running in the background. Strange thing while having clicked on the link and began a new session of Firefox, it opens the legs as usual while clicking on the following links several times but close Firefox and restart and then click on the links in the Skype window, it does not. I have to bring up the context menu, then choose Copy address. »

  I see there is no answer to the problem that guy had and I have the same problem - links of Skype and Windows live mail will not open and there is more - FF does not open the html files that are saved on the pc, even you, I just saved 'em, but when I click on em nothing happens and when I right click and choose open with FF nothing happening.

  He worked for two weeks without problem and suddenly today links just do Skype flash exactly as in christianhbergs description and in windows live mail, they become purple but firefox does not react.

  as soon as I make IE as my default - links work, but not with firefox.

  So I guess that the problem is in firefox (no Skype or WLM in Win8)

  (running Win8 and FF25.0)

  And none of the solutions that you have given us in the work of https://support.mozilla.org/en-US/questions/961242#answer-497345 .

  I found the problem you!

  I don't usually turn off the pc, but I Hibernate it!

  While I had this problem, I decided to restart my pc.

  The problem disappeared after a reboot - so I suppose the FF problem was somehow linked with use of the memory to the hibernation.

  Thank you for your answers
  anyway.

• Will not answer application blackBerry Smartphones, phone will not do anything

  My bb-9330 has 'a + chat for face book' installed and it is stuck on the screen where the application requests access to gps information, but will not let me answer.

  I got it but thanks for trying. This time when it restarts, I immediately scrolled to the answer that I wanted before it locked up. Thank you

• Help and Support service will not start

  Nice day

  I use Windows XP Professional on my laptop HP DV9000.

  When I try to open the help and support service, I get a message saying "Windows cannot open help and support because a system service is not ongoing enforcement. To resolve this problem, start the service named 'help and Support." »

  I searched many websites for more information about this problem without success.

  I tried to locate the program itself and once again without success.

  I did nothing to my laptop in some time (months) and have installed SP3.

  I tried to follow the instructions in my research, I hope, it's enough to find help here.

  JC

  Check here: Control Panel, tools, Services, administration, scroll down to: help and Support, and then double-click to open the page.

  Startup type: automatic

  The service status: click Start, click OK

• "s" key will not answer

  "" A week ago I started having some i s Edition with my "s" keys on my laptop (hp pavilion dv5) keyboard. It stop working for a few minutes, but after that I removed the key and cleaned under it, she started responding again.

  Now, the key stopped working altogether (I was able to type teas's in this mesh in. by copy - paste).

  I have not spilled something on the keyboard and this i s the only key that is not appropriate.

  The key will not work on the keyboard on the screen.

  I don't know if this I s a pilot is known or if it is simply a problem with the keyboard itself.

  Any help would be appreciated. Thank s.

  Try an external keyboard.  If the "s" key works on it, then it is almost certainly of a mechanical problem with the internal keyboard.

  "airekuh" wrote in the new message: * e-mail address is removed from the privacy... *

  "" A week ago I started having some i s Edition with my "s" keys on my laptop (hp pavilion dv5) keyboard. It stop working for a few minutes, but after that I removed the key and cleaned under it, she started responding again.

  Now, the key stopped working altogether (I was able to type teas's in this mesh in. by copy - paste).

  I have not spilled something on the keyboard and this i s the only key that is not appropriate.

  The key will not work on the keyboard on the screen.

  I don't know if this I s a pilot is known or if it is simply a problem with the keyboard itself.

  Any help would be appreciated. Thank s.

• Touchscreen Officejet Pro 8500 A910g a will not answer and the test page does not print during installation

  During the setupl touch screen lights up with the screen language and network led on.  Test page does not print.  Touch screen will not respond.  Printer purchased on 20 Oct.

  Hi paulw17291,

  Power remove power at the back of the printer cable. Wait about 1-2 minutes before plugging it back in. Let me know if that solves the problem you are experiencing.