Waterfall and dual display

Similar Questions

• Portege M200 and dual display

  Hi I have a M200 which I use as well in the form of tablets & to my office as my workstation. I run a 17 "LCD screen directly to the M200 with no docking station. I want to be able to extend my desktop on the M200 LCD screen, while the main office remains on the LCD 17 ". I can do it the other way round, but it's not that I need.

  The device to use as primary monitor is grayed out in the disp accessories. I use the 4.6.4.4 driver version.

  Any ideas?

  Hello

  It is not possible.

  Nick

• SE Pavilion a4313w support dual display?

  My A4313W will support dual display? If this is not the case, what should I upgrade and what should I put to date?

  2.2 GHz AMD Sempron

  3 GB RAM

  Windows 7 64 bit

  Here are the full specifications for your HP Pavilion a4313w desktop. As we said already, your factory-installed power supply is only 250 watts and cannot support the requirements of most graphics cards at retail. If you want to install a discreet graphics card into the PCIe x 16 computer slot, you will need to upgrade your power supply the minimum required by the graphics card. For more information, see Guide of Big_Dave for the selection of a discrete video card .

  If you don't do any game and want more screen space for the trading day, spreadsheets, word documents, etc., please consider a video-to-USB adapter as the EVGA UV more + UV19 or EVGA UV more + UV39.

• Portege R500 - Powerpoint and dual head video card

  Urgent! I have a presentation to do tomorrow.

  Anyone know if the Portege R500 has a dual head video card so that Powerpoint can be used in presenter view. That is to say, the notes show on laptop and external display or via a projector presentation?

  I put t know what you mean exactly with dual head video card but the Portege R500 may be connected to the projector too.
  You could extend your desktop on the projector by using the FN + F5 key combination and could spend the PowerPoint on the extended desktop.
  This should also work.

• Dual display for Pavilion Elite HPE - 580 t with NVIDIA GeForce GT 420

  recently bought Pavilion 580t for my wife. Updated to NVIDIA GeForce GT 420 map graphics. But there are currently not able to determine if it supports dual display. When you check the Nvidia site, he says that all the stuff here. But this has only a DVI port. It also has an HDMI port. Do I need a spliter any for this?  Or can I use the HDMI port for a monitor (if the new monitors even come with this exit) and DVI for others (currently using the VGA adapter)? 

  I upgraded the stock graphics card when placing your order. I hope that I did a bonehead move and will still need to buy another graphics card.

  
  Thank you.
  

  Hello

  Psallo wrote:

  recently bought Pavilion 580t for my wife. Updated to NVIDIA GeForce GT 420 map graphics. But there are currently not able to determine if it supports dual display. When you check the Nvidia site, he says that all the stuff here. But this has only a DVI port. It also has an HDMI port. Do I need a spliter any for this?  Or can I use the HDMI port for a monitor (if the new monitors even come with this exit) and DVI for others (currently using the VGA adapter)?  Yes. You can do this.

  I upgraded the stock graphics card when placing your order. I hope that I did a bonehead move and will still need to buy another graphics card.

  
  Thank you.
  

  It shows what it looks like on the back of the graphics card?

  

  Best regards
  ERICO

• Dual display capability

  I own several PC Slimline box office 400-314. Supposedly, they are able to dual display. Can I just connect 2 monitors to integrated video connectors (one VGA and one DVI) motherboard and re - configure the OS Setup ' display? If so, I'll be able to expand the office and 2 browser windows open?... .or will the office be duplicated?

  Hello

  Review the specifications of the motherboard and such information as published at HP.

  HP has an official presence on this forum other than for administration and moderation. The help you receive is mainly by volunteers.

  If you have any other questions, contact HP support. HP support number is 800-474-6836 or 800-HPINVENT or online here.

• change to dual display lamp

  I have a dv9825nr and the display only stay on for about a minute before going empty, an external a spare part works fine. It is a dual lamp screen and I have a simple fire spare screen.  can you replace a double lamp with a screen of single lamp as well as the inverter?

  The problem usually is the placement of the connection cables. Try laptopscreen.com and you can watch the screens and the placement of the connections. The screens are less than $60 with shipping.

• SX20 - dual display does not work as expected

  Español version. Spanish version

  Hola a todos.

  I have a Cisco SX20 dumb terminal license dual display. Tengo tambien UN con C20 the same license.

  1 - Cuando el C20 esta idle muestra el video en ambos monitored, TR dá local PC en the contenido entrada, entonces lo muestra in el Monitor 2.

  2 - Cuando el esta SX20 slowed muestra el video local solo el monitor 1, TR dá a PC en the contenido entrada, entonces lo muestra in el Monitor 2.

  3 - Cuando el C20 Esta en llamada, el video remote is ve en el monitor 1 y el video local to ve en el Monitor 2. Al compartir el monitor 1 muestra el contenido video remote y del video PIP local, el Monitor 2 muestra el contenido.

  4 - Cuando el SX20 Esta en llamada, el monitor 1 muestra el video remote y del video PIP local, el monitor 2 gray hasta permanent that envia contenido.

  Al final dejo lo descrito representando imagenes.

  How puedo hacer para as local video el y remote del SX20 is monitored separately cuando en muestre no is envia contenido?

  Esta el archivo del terminal config Editor

  English version. Frances version:

  Hello, everyone.

  I have Cisco and C20 SX20 endpoints. Both with dual display of the license.

  1. when the C20 is inactive, monitor 1 and 2 show the local video. If I connect a PC to the content source and then the monitor 2 shows.

  2 - when the SX20 is idle, just monitor 1 local video shows. If I connect a PC to the content source and then the monitor 2 shows.

  3. when the C20 is a call, 1 shows the remote video monitor and monitor 2 local video. While content sharing monitor 1 video shows distance and PIP local video, monitor 2 displays the content.

  4 while the SX20 is a call, monitor 1 video shows distance and PIP local video, monitor 2 gray yet. While content sharing monitor 1 video shows distance and PIP local video, monitor 2 displays the content.

  At the end are 2 pictures that show the problem.

  I want to watch the video video in separate screens where the content is not sharing (SX20) remote and local. How can I do?

  The xconfiguration endpoint is attached.

  Note: Sorry if my English is not so good.

  Sharong content:

  

  No sharing of content:

  

  I hope you can help me. Thanks in advance

  Hello Sharong-

  Change the following two parameters on your codec, and this should help you to what you want.  When TC6 came out and Cisco introduces new options of selfview, it changed how the codec have behaved and treated the selfview when using dual display.

  Video SelfviewDefault FullscreenMode: OnVideo SelfviewDefault OnMonitorRole: Second

  When content is sent, it will display on your secondary display selfview becomes a GLITCH on the first view  OnMonitorRole will on your second screen selfview when content is not displayed, and modepleinecran make selfview display full-screen when it is on the second screen instead of a PIP.

  For more information, you can take a look at the following bugs: CSCuh04746 and CSCuf74115.

• Explore Windows crashes when multiple instance are open on the dual display

  When I have several instance of Explorer windows open on the dual display and I start copying files from one folder to another folder, Explorer plant

  Thanks, it works for me.

  I uninstalled DisplayFusion and there are no more problems with the files to be copied.

• How photoshop round of dual display, each with a different profile?

  I am looking to buy the dual display for photo editing and would like to have each calibrated and profiled differently - 1 for web output and one for the print output. I use Mac OS and I understand that ICC (Photoshop and Lightroom) compatible applications use the system default profile to display the colors regardless of the operating system. I'm curious to know if photoshop is capable of managing 2 display profiles stored on the system to match each display? I am concerned that 1 only one profile can be defined by default and that he will use this profile for both screens.

  Yes, it uses a different profile for each monitor.

  But your thinking is dead wrong.  You do not calibrate and profile a monitor 'to print' or 'Web'.

  You calibrate and profile a monitor to display the colors better, more precise and natural, it can handle.

  The output is considered through Proofing (menu items "test" and "test colors" in the display menu of Photoshop), a topic on which you need to do a lot of reading.  Start with the help files in Photoshop.

• Dual display feature works not

  I work with the latest version of Speedgrade CC on an iMac 2010 running OS X 10.9, I also have a secondary screen connected to the iMac. When I activate dual display output, nothing appears on the other screen. I can see what needs to be on the second screen when I launch the application in the control of the Mission and he said "double active screen or SDI output" but when I try and go in the display using mission control, nothing happens. The MenuBar at the top of the screen, I see that I am using Speedgrade on this screen, but I can't see the video.

  Thank you. After browsing a bit more, I realized that it has been moved more than 1920 which meant that it was on a non-existent right display. Moving to-1920 left him.

• Dual display Windows XP

  My computer laptop dual display view Windows XP?

  Yes.

• After Bios Update satellite A10 had totally frozen and the display is blocked

  Hello

  Today, I tried to update my Bios of satellite A10 to 5.20.
  I downloaded the unziped file and executed, as recommended in the instructions.
  After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
  How can I solve this problem?
  Thank you very much in advance.

  Wait a moment you sure you used the right BIOS?
  As you say, your laptop is that a Satellite A10 is good?

  I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!

  Sorry to say but it seems that you used the wrong BIOS!
  You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!

  I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician

• Satellite A210 - cannot install common module and driver display

  Just down to XP, downloaded drivers from toshiba and the installation was completed with an error not saying no driver found for my hardware. That's happened with the common Module and ATI Display Driver.

  I mean, I need em both!

  Help!

  Hello

  I checked the page European driver of Toshiba and it seems that XP drivers have not been to this A210 series!

  I think that you just tired to install common Modules is not supported on this laptop.
  That is one reason why you can not install it.

  With regard to the display driver.
  Try to install the drivers for the laptop models:
  PSAEJE satellite A210
  Equium A300D PSAK2E
  Equium L350D PSLE2E
  Satellite P200 PSPBLE
  Satellite L350D PSLE0E
  Satrellite L300D PSLC0E

  In my opinion, one of the pilots freed from these series should run.

• Windows failed to update for HP - Bus USB and Ports, display controllers - HP w2408 widescreen LCD

  I have a new HP M9402 desktop with monitor Hp W2408 Summit.  I get a message to update windows for HP - Bus USB and Ports, display controllers - ACL from HP w2408 widescreen, but the windows download always fails.  I tried several times to download this update.

  Any help would be greatly appreciated.

  Hi all

  The solution to my problem of not being able to make updates to the window was to spend in an HDMI instead of VGA cable.

  BR / / JJG