Windows does not detect the controller Guitar Hero Explorer

Similar Questions

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.

• HP 15-D103TX computer laptop problem: Windows does not detect the dedicated graphics card

  Hi all

  I recently bought a laptop HP 15 - D103TX , which is held responsible for Free on BACK. I have updated my Windows 8 operating system and have installed all the drivers from the HP website. The laptop has dedicated 2 GB Nvidia Geforce 820 M graphics card.

  But when I checked, I found that Windows displays the graphic memory dedicated only 0 MB.

  

  As you can see in the screenshot, it shows as 0MB dedicated graphics memory.

  Anyone can clear me, upward on this subject? Is it a driver problem, or what is Windows 8 going crazy.

  Thank you very much in advance!

  Kind regards

  Brahmnoor

  Okay, I found the solution. In fact, the Haswell Intel i5 processor that my 15 HP D103TX has also comes with an Intel 4600 GPU intregated. So when I do normal tasks, the GPU intregated works, so Windows does not display the NVIDIA GPU 820M, but when I play a game or doing intense graphics work, he switches to the NVIDIA one.

  In fact, it makes sense, because it preserves the battery of the laptop.

  Credit: found this solution on the NVIDIA support forums.

  https://forums.GeForce.com/default/topic/664986/GeForce-700-600-series/dedicated-memory-not-shown-/

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• The Digital Persona does not detect the fingerprint reader in Windows 7

  I have upgraded from Vista to Windows 7 Pro (full installation). Now, DigitalPersona does not detect the fingerprint reader. I tried to uninstall and reinstall the driver and the program, does not. Any ideas?

  Hi Cankermechanic,

  I suggest that you try to update the drivers supplied by Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  If the problem persists, I would recommend that you uninstall drivers and reinstall the drivers from the site Web of Digital Persona, if that is helpful.

  If the problem persists, I suggest that visit you the manufacturer for further assistance from the link below:
  http://www.askpersona.com/

  I also recommend that you contact the manufacturer of the computer for further assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Qosmio G50 does not detect the connected Bluetooth devices

  The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
  Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.

  I did a test to see if it could depend on the PC or the mouse.

  I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
  And the phone does not detect the qosmio via bluetooth.

  What checks can I make on the qosmio while ' I detect devices via bluetooth?

  Tank you

  Hello

  BT has been successfully activated on tis G50?
  Have you used the FN + F8 key secret to switch on the BlueTooth?

  Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.

• Satellite A300-24Z - windows does not detect connected sata hdd

  Hello

  Ago that I bought the new laptop Toshiba Satellite A300. A few days ago, I decided to plug in my old laptop HARD drive - drive is Toshiba MK1234GSX - my new laptop via sata to esata cable. Problem is that windows does not detect a new device, by itself, nor in the Device Manager. Is it possible to do this drive works?

  Thanks for help.

  Hello

  Have you tested other drives?
  This should be checked!

  Please go to BIOS and adjust the default BIOS by pressing F9 button in the BIOS settings.
  Save the changes, and then try again

• Computer does not detect the pci card

  Hello
  I have a dell dimension 4550 pc, with windows xp professional service pack 3.

  I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

  What can I do to make the computer detect the new card?

  Thank you

  It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!