Wdf01000.sys IPF in nonpaged area

Similar Questions

• IPF in nonpaged area

  I installed the windows updates on my computer hp laptop a few days ago and after reboot I got a BSOD indicating there is an IPF in a non paged area. I can't start in safe mode, USB drive, CD/DVD drive without this screen limiting access to my hard drive. I even tried to access the drive by installing on another laptop, but not luck. I start to hirens boot cd on another unit and consultation: display disk files, but they were preceded by a symbol $ and read-only. I had no problem with my HP til updates. I cling responsible for Microsoft, as I read other people are having the same problem. I contacted Microsoft and they sent me to restore disks for Vista, but still, I can't boot from the optical drive. It becomes a nightmare and I will not regret losing my data in case it becomes necessary to re - partition and format the drive. If anyone has a suggestion... just below to set the income of Bill Gates... lol, I would be grateful. I have several years of experience in repairs and installation of software and hardware, but it is difficult for me. Thanks again to all who can bring the light of life to my HARD drive.

  Christopher

  Same computer as in this thread (Oct 09) earlier of yours? -Online http://answers.microsoft.com/thread/34739a6a-089c-4c5b-a3b8-5bbae86999a8

• IPF in nonpaged area blue screen Win 7 64

  To run Win 7 64 BSOD delivery bit and got with error message Page Fault in non paged area. Recommended that I try Safe Mode. Then turned PC on again, came back to a screen which recommended repair or Normal startup. I have authorized the default setting - repair. Win 7 attempted to restart, then BSOD again with the same message. Turned PC off again and this time chosed F8 during startup to access Safe Mode options. Has been presented on the screen to choose and I chose Safe Mode. Minimum drivers scroll towards the bottom of the screen and the PC begins to start, never to switch Mode without failure. New BSDO is displayed. I unplugged all the USB devices, Zune HD, external hard drive, etc leaving only mouse and keyboard.

  Tried again to go to Safe Mode and it comes back to the BSOD.

  If I choose to start Win7 normally, I see the Win7 splash screen as it will start upwards, then returns to the screen recommending to select repair or start normally. If I chose the repair, it goes back to the BSOD. If I chose Normal startup, it will come back to this screen. So it seems to be an endless loop and no way to get into Safe Mode.

  I have not tried a repair of the Win7 disk yet, because I don't know if there is something I should do first, like entering the CMD Mode if it will let me, etc and try different commands.

  I feel it's related material based on what I've read online from my work PC, but I need to raise Win7 so I can dig & run diagnostic tests. Last thing I did on Sunday has been add my new Zune HD in the Zune software client and that I could see, all updated very well. I used the Zune PC client software for my Zune 120 previously without problems.

  Any help would be appreciated so I can check 'how to' on work on the home PC.

  Thank you!

  Hi Wasipeer,

  Welcome to the Microsoft community.

  For better assistance, answer the following questions.

  1. What is the brand and model of your computer?

  2. do you get any error code or message?

  3 did you do any change in the computer?

  See the following Microsoft Help article and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Reference:

  Follow the link.

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559023 (v = vs. 85) .aspx

  I hope that this information will help you.

  Please reply with the status of the issue so that we can better help you.

  Thank you.

• Blue screen error crash, caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  original title: Blue error screen, accident of death caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  I currently own an Aura of Alienware Dell, it's an amazing computer. The only problem is that I had a lot of problems, I was able to permanently fix all except this issue. I'll randomly crash blue screen, usually it doesn't happen often and it is normally not triggered by something specific, rarely it will crash at startup. I was able to download an application that can read the cache/dump blue screen crashes:

  34 accidents

  one was caused by Wdf01000.sys

  three was a result of tcpip.sys

  and all the rest of ntoskrnl.exe

  I don't know what caused it, I've had this computer for about a year now and I've never had this problem before. I don't remember an update of the cause, or by downloading any strange apps, downloads or viruses. (I had wiped my computer about 3 months ago)

  I don't know too much about software,

  Any help is appreciated.

  Hi bloo532,

  1. what application did you use to read dump files?

  2. did you of recent changes on the computer?

  It resembles that of the driver on the computer is causing the blue screen.

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Also make sure that all drivers are up to date on the computer.

  See the link below and try them the steps mentioned, check if it helps.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

   

  If the previous step fails, then you will need to provide the minidump files.

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Frequent and random of ntoskrnl.exe BSOD / wdf01000.sys

  Hello

  I get a lot of crashes BSOD recently, through many different programs, apparently at random. BlueScreenView told me it's on ntoskrnl.exe / wdf01000.sys almost every time, but googleing it does not give me an answer. Can anyone help me with any idea what these are, or correct?
  Windows 7 64-bit, here's a link to my most recent minidumps...

  https://DL.dropbox.com/u/14709604/minidump.7z

  Thank you
  Luke

  Luke

  This driver is dated 2004
  ctgame.sys Port enumerator creative play Creative Technology Ltd.

  This driver may very probably be updated, but the exact model is required to identify the right driver
  Ralink 802.11 USB Wireless netr7364.sys adapt Driver Ralink Technology

• My computer randomly gave me a blue screen, the error message "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys).

  Original title: driver error

  They just showed me an error on my computer. I am currently running Windows 8. I was in the middle of games on Steam and my computer randomly gave me a blue screen. He told me that "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys). It restarted and now I'm on that's fine, but I was wondering if there is anything I can do to prevent and what should I do to remove if it's going to be a recurring problem. Thank you.

  Here is a list of the help page instructions:
  «' ' ' Exact error message: DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys)»»» "
  -Your program and Version: don't know what to put here.
  -Your operating system and Version Windows 8
  -Your browser and the Version of Google Chrome Version 28.0.1500.72 m
  -All soft/hardware you have recently installed or removed - None.
  -Any recent changes that have been made to the system - None.
  -What you did to solve the problem of Google there as the error message recommended, read a few results, thought I would ask here.
  Specification of the computer if necessary:
  HP - Sleekbook 15.6 ENVY "
  AMD - processor A10
  -DDR3 SDRAM
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  You can learn more about BSOD here
  
  
  
  
  Team Zigzag3143.com  

• U310 - "failure page in the nonpaged area."

  Hello

  I have Lenovo IdeaPAd U310. Since a few days, I have problem with booting the operating system. When I turn on, after that a few seconds system displays a BSOD with an error "page in the nonpaged area failure." After that computer try to fix yourself, then restart and... system displays a BSOD with error 'page in the nonpaged area failure' it is the same in safe mode. So I can't back up my data from the HARD drive or check system settings or drivers. I can run BIOS and boot menu, I changed the boot sequence, but the computer boot form USB CD or USB key.
  What I would do. How private backup files form HARD drive?

  My job U310 now I used onekey recovery and now have windows 8. My problem has been resolved.

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.

• Cannot start after the blue screen "page in the nonpaged area failure."

  My sons laptop has got to me.  There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.

  I tried all F8 options, without success.  I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not.  I ran diagnostics memory on the scope option and who found nothing.

  No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!

  I would be grateful for any suggestions that anyone can have.  I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?

  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Blue screen of death - Wdf01000.sys

  Hi guys

  I had a problem with my homemade PC, it works on windows 7 Home Premium 64-bit

  Here is the message I get.

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: Wdf01000.sys

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X0000010D (0X000000000000000A, 0XFFFFF880035A0D20, 0 X 0000000000000000,
  0xfffffa800acd7850)

  Wdf01000.sys - address 0xfffff88000ee549f base at 0xfffff88000e61000 DateStamp
  0x51c51641

  It seems to only happen when I wake him from this passage in mode 'sleep'.

  Any help would be great.

  Thank you

  Dan

  Associated with the Bluetooth HighSpeed Filter Driver of Intel Corporation btmhsf.sys

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Windows 8 upgrade - lack of exceptions of the unmanaged system (wdf01000.sys) thread

  I'm moving to Win 7 Home Premium to Win 8 Pro. After installation of Win 8 is complete (after verification), I get the error "Unhandled System exception in thread (wdf01000.sys)" and windows 8 installation is cancelled. Have tried a few times, but get the same error.  I ran through BlueScreenView discharge and it points to "Wdf01000.sys + 122ac '... Help, please.

  The setupmem.dmp seems to have the required information and shows that the AiChargerPlus.sys driver is perhaps the question:

  Bugcheck 1000007E, {ffffffffc0000005, fffff880010b203f, fffff8800397aaa8, fffff8800397a2e0}

  WARNING: Unable to verify timestamp for AiChargerPlus.sys
  ERROR: Module load completed but symbols can be loaded for AiChargerPlus.sys
  Probably caused by: ucx01000.sys (ucx01000! Urb_USBPORTStyle_ProcessURB + 9 b)

  The AiChargerPlus.sys, which is dated November 8, 2010, may be an element of the have charger + utility ASUS.

  I would say to uninstall have charger + and try the upgrade again.

  I also suggest to update the GEARAspiWDM.sys (heavy plant driver) to a compatible version of Windows 8 before the upgrade:

  http://www.GearSoftware.com/support/drivers.php

  And consider to uninstall Norton before the upgrade, do the upgrade, and then reinstall Norton using the latest compatible version Windows 8 or go with a built-in antivirus Windows 8 software.

• sys and system schema are expired & locked after disaster recovery.

  Hi all
  
  In one of our development database, I conducted disaster recovery and he succeeded.
  After completing the recovery thre, sys and system schema are expired & locked.
  So, I'm not able to carry out any type of operation that is performed by the user sys and system.
  
  Database Version: 11g r2
  Operating system: RedHat 5.5
  
  Please please suggest me how can I solve this problem?
  
  Thank you
  Pitard.

  It might be

  What is the status of the users in the source database from which you have taken backup? Maybe he has so locked even after performing refresh status remains the same.

  See your profile stats below. All have remained unanswered. You simply test patience? If this isn't the case, close all threads as answered. Clean up the forum.

  User profile for pitard
  Pitard
        
        
  Handle: Pitard
  Status level: Beginner
  Join date: March 4, 2010
  Total messages: 9
  Total Questions: 8 (8 open)
  Viren name

  Published by: CKPT on February 20, 2012 19:47

• Satellite C70D PAGE FAULT IN NONPAGED AREA - frequent BSOD

  Hello

  for awhile, my laptop is a blue screen several times a week, e-mail: PAGE_FAULT_IN_NONPAGED_AREA.

  Past discharges according to the attachment.

  How to recover from this?

  Help, please.

  Thank you
  Alex

  I also have this error sometimes, all my BSOD can be found here - http://answers.microsoft.com/en-us/w...7866#LastReply

  Most of the drivers are probably obsolete and not for Windows 10... For example my BSOD is caused by AR8171 of Qualcomm Atheros driver...

  BUMP...

• Get the Blue error screen: "error of Page in the nonpaged area".

  Original title: Page fault

  I get a blue screen Page fault in non paged area... just above what it lists win32k.

  I get this error when you create a new contact in Outlook or by using Firefox.  I can use IE 8 without any problem.  Do not know what is causing this problem.

  LJ

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  http://msdn.Microsoft.com/en-us/library/ff559023%28VS.85%29.aspx

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

  A day at the start of a program on my computer that I used for years without incident, the computer suddenly fell down, restarted, and I got the infinite loop of system repair. No change in hardware/software, don't know if a recent Windows Update has been installed. Once again, CPU, mobo, Vid, RAM are the same for the past 4 years.

  After much frustration, I decided to just reinstall Win 7. So I deleted my partition, re-created a new partition and installed Win 7

  In the last step of the process of installing Win 7, it says Setup cannot complete. It is then stuck in a loop of reboot with a BSOD page fault in non paged area.

  I tried F8 on startup and choose Safe mode, but then he says that the installer cannot boot mode safe because the installation of Win 7 did not finish.

  I tried to reinstall Win7 by removing the disc again, but I get the same results.

  What can I do?

  HI - finally got the job. I had the computer to use only the GPU on board BIOS and was able to install. Somehow the graphics driver conflict when Windows is first installed and it kept crashing.

  Thanks for your help.