Adds storage space not

Similar Questions

• Add storage space to PE2950

  We have a power Edge 2950 which has 8 bays of hard disk with only 3 GB 150 disks in a RAID 5 array, and we want to add a TB on this server for the storage of virtual machine. What will be the best way to do it. Can we just add a few hard drives for empty slots and set up as another drive? Can additional discs be part of another RAID array or will we have to erase and start over? Thank you.

  Hello

  Yes, you can add disks and create a virtual disk of 2^nd for storage without the Ramdisk initial editing. Page 85 ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_dell_adapters/poweredge-rc-6i_User%27s%20Guide_en-us.pdf

• What does add storage Wizard?

  Dear team,

  Once I click on Wizard to add storage, I m n learn number of LUNS that follows is the blink of an eye the same.

  

  is over the top of the screen measn that VMFS datastore is not created on LUNS?

  Concerning

  Mr. VMware.

  To add to the iw123, the LUN response that appear as being available in the Wizard "Add storage" does not contain a VMFS data store or they are used as a ROW.

  André

• Storage space does not add correctly?

  Last September, I tried to download a zip file of 1.3 GB. Download appeared at the end, however, he never appeared in the cloud. I have posted about this problem and see the space occupied. At the time where space has been estimated in the Trash because I had not permanently deleted from the trash and he had a lot of files, and since the file don't was not there I assumed that the download failed.

  This brings us to today, according to the website of Creative cloud I have 6.7 GB of storage space currently used. However, if I add what I have stored in there I can't 5.5 GB of storage used. I thought maybe it was the trash, or archive, and when I look, there is no files in archive that I have deleted recently (when I finally deleted archive files do not have more than 100 MB).

  Is it really this 'missing file' and not do not show? Why I see a difference in storage space?

  Thanks for any help!

  We have fixed the problem.

• PowerEdge 1850: Need to add storage: ISCSI or SATA controller or? : Host does not support configuring passthrough

  I have a (non - VT capable) PowerEdge 1850 which took an ESXi 4.0 U1 (Dell Version) installation like a champ.  I know that I probably won't be able to have 64-bit clients.

  In this box of ESXi (laboratory

  Server) I have:

  • 2 x 73 GB SCSI U320 drives in RAID 0 array.

  • 6 GB OF RAM ECC

  • 2 x 1 GB NIC

  • 2 x PCI - X slots (PCI - X slot 133 MHz and PCI - X connector 100 / 66 MHz)

  I want to add more space "VM/Guest" and not spending too much money.

  What is my best solution?

  1. Find a compatible ESATA 3Gbps controller card (I have a nice 500 GB SATA Drive laying around)? ...

  2. Or should I get out an old box and throw a Gigabit NETWORK card and a SATA inside player and try my hand at Openfiler? I have yet to try it.

  3. ... Or... something else?

  Could someone help me hand choose either a PCI controller card - X ESATA/SATA (is - it possible or am I limited by my attached picture?) or a NETWORK card for my spare box (if it is not an old)?  I understand "_ _passthrough configuration"allows my virtual machine to hardware on the host computer directly, but I'm not clear how this effects my plans you want.

  I read:

  • http://www.VM-help.com/esx40i/esx40_whitebox_HCL.php#storage

  • http://ultimatewhitebox.com/iocontroller

  • http://www.VMware.com/resources/compatibility/search.php

  .. .but I am suspicious of money sinking into the material lest my PowerEdge does not support the Configuration PassThrough (does it matter?)  I still have to load a single guest.

  Thanks a lot for your time in advance!

  Get started with what you have. Do not pass anything. Set up the old PC you have as a NFS storage device. Use openfiler or? That will allow you to do some investigation/tests you want to do. Keep your eyes open for a local RAID controller or on an old server with lots of fast scsi storage you can add such as NFS or?

• RND4210 ReadyNAS 'your NETGEAR storage space is not accessible from this computer... »

  Hi all

  First time poster here.

  My uncle died in November and he had this NAS device in his office. On the back it says RND4210 ReadyNAS but do not know what version or model or something else.

  I got to download RAIDar, but now I have done that and it detects that the NAS very well on my network, it comes up with the following message appears:

  "Your NETGEAR storage space is not accessible from this computer. Please check your network settings. »

  Any help would be appreciated.

  Everything is now resolved.

  Although it is on the same network, it took my PC to also have a wired connection. I moved closer to my hub and plugged here rather than steal my PC ethernet and putting my PC into a Wi - Fi.

• I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  1. the first thing to do is to make sure that the computer is completely virus/malware-free. Googling around this error produced quite a few links where the posters were or had been infected with Spyware Protect 2009 rogue.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Once the scanning is complete (do not skip the preparatory stages no more), if the problem persists:

  2. double-click on my computer, right-click the icon for your hard drive, click left to get its properties. If you see options to set Quota management make sure that they are disabled.

  3. in the case - BUT ONLY AFTER YOU ARE sure THAT THE MACHINE IS MALWARE/VIRUS-FREE - copy the lines between asterisks (not including the asterisks) below and paste it into Notepad. Save as undopolicy.reg somewhere, you will find. And then double-click the .reg file, that you have just made to melt in your registry. I hope that this will take care of the issue.

  *****
  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  'EnableProfileQuota ' = -.
  'ProfileQuotaMessage ' = -.
  "MaxProfileSize" = -.
  'IncludeRegInProQuota ' = -.
  'WarnUser ' = -.
  'WarnUserTimeout ' = -.
  *****

  MS - MVP - Elephant Boy computers - don't panic!

• "Backup failed. Not enough storage space.

  Original title: image

  W7 32-bit HP. Use the image via Control Panel with success for a long time. However, this morning received the message "backup failed. Not enough storage space. Have you checked and at least ten times more space on the destination like this drive would be necessary for the entire image.  The only change I've made since the last successful backup is to install an SSD on my computer as the main C drive.

  Thanks, but none of it has hit the problem!

  I now it worked. For the benefit of any person who has the problem, Image requires that there is enough space on the * source * system partition of the drive for the shadow file (when get "space insufficient" messages everyone (including me) assumes respect to the * destination drive!)  (Not so).

  This seems to happen to a lot of people who are for the first time in an SSD. Because I had previously shrunk the partition on my drive C primary, preparatory to mounting small SSD (112 GB), the system partition was too small for shadow of the image file.

  Under W7 disk management even if the main partition on the C drive could be reduced to create a space unallocated, the space could not be assigned to the system partition as requiring a contiguous space.

  So I used (free for home) Easus Disk Manager to create space * before * the partition main c and then expanded the system inside partition, making this system partition that is large enough. Everything worked well then!

• Storage space does not connect to a drive

  Whenever I have restart my computer storage does not reconnect to one of the disks.

  If I take the cover off of the computer unplug and reconnect the drive (all voltage) it recognizes the drive, but I know that the drive is connected, it is recognized by the Storage Manager Marvel that it is connected via a PCie 9230 wonder.  I unplug the connector SATA Marvel made the player not connected and when I plug again, it recognizes the drive, at this point storage spaces reconnects readers physical and made available again assigned storage space.

  I have a motherboard ASUS P8Z77 - V Premium.

  Edge Liteonit LMT-32L3M (general storage)

  On the edge SATA ASUS:

  SSD Samsung 840 PRO boot disc

  Blu - Ray burner

  2 x Western Digital WDC WD10EADS-00L5B1 1 TB drives (readers of pooling of storage)

  On the menu of PCIe 9230 Marvel

  1 x Western Digital WDC WD10EADS-00L5B1 1 TB drives (readers of pooling of storage)

  3 x Western Digital WDC WD30EZRX-00DC0B0 3 TB drives (readers of pooling of storage)

  It's the 3 TB drive on Marvel Port 3, which is not recognized at startup, but is on disconnect/re-connect.

  The system has worked well for several months, but has just started to drop the disc.

  I can't keep the lid and UN-plug/re-plug the disc each time.

  is there a problem with storage space as the BIOS recognized the drive as a startup just used Windows connect until forced.

  Hi,
   
  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro
   
   
  Please do not hesitate to contact us if you have other questions related to Windows.

• How can I add white space between areas that contain text fields? I use Adobe Acrobat Pro DC 2015.  I'm trying to change an existing PDF. I need to add white space between areas that contain text fields to allow these text fields to be developed and not

  How can I add white space between areas that contain text fields?

  I use Adobe Acrobat Pro DC 2015.

  I'm trying to change an existing PDF. I need to add white space between areas that contain text fields to allow these areas to be developed and do not overlap the text and the text below fields.

  For example:

  1. 1.

  Progress/strategies:

  1. 2.

  Progress/strategies:

  1. 3.

  Progress/strategies:

  1. 4.

  Progress/strategies:

  The space between each 'progress/strategies' increasing needs. A text field is under each of them. If it's a Word doc, I could just press on enter. What is the best way to do this with Adobe Acrobat Pro DC?

  There is no easy way to do it. You need to move the text fields more apart and if there are static elements, then you will need to use the tool edit text & Images to move them, separately.

• You see only not iscsi LUN, attaching to add storage

  I'm newish to the whole thing vmware/iscsi, but got it to work once.

  Environment:

  HB BL460c (32 GB of ram, 2 x local 146 GB SAS HD, nc382m HBA)

  vSphere ESXi 5.1

  MSA2012i (12 x 1 TB HD)

  I created a vswitch (VMkernel Port) to port1 of the nc382m (vmnic2) and then added the virtual iscsi adapter to connect to them.  A re-scan one I could add the LUNs available on the MSA as storage on the esxi host.  Everything was fine.

  But, I created a second logical unit on the MSA number (it is shared to all hosts) and I re-scanned on the esxi, but when I try to add storage no LUNS are listed.  I followed the same procedure as the initial installation, which worked fine and now no joy.  I searched the forums for ideas but not so far seems applicable, since I was able to do this for a single logical unit number but can now add a second logical unit number.

  Kind regards

  Marshall.

  The issue has proved to be a bug/flaw in the MSA.  The MSA I use has only a single controller/processor storage and apparently regardless of whether it has one or two SPs it assigns new vDisks of alternately between both SPS 'potential '.  So in my case the first vDisk was entrusted to SP - A and worked beautifully.  The second vDisk was assigned to the same SP - B hard did not exist.  Therefore, it was not visible for ESXi hosts.  Change of 'ownership' of the second vDisk lun was visible on the ESXi host.

  Here is a link to HP Customer Support Advisory about this behavior:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3687128&prodTypeId=12169&ObjectID=c01470001

• Creative Cloud storage space that is not released...

  I connected to CCM and tried to download different types of files. Tried to download video files, text files and etc to see if it accepts all kind of files. However when I moved forward and remove all the that the I noticed that storage space is not released based on the indicator bar located on the top right of the site, he did download all files. The storage is 2 GB and the blue bar indicates that it is almost full, even after deleting the files I downloaded. Is this a problem with the cloud of Creative site? A limitation of the free CCM, or does happen on full membership as well? I tried to access my free account CCM on different computers on different places with different browser and it shows the same progress bar so I don't think that there is a problem with the browser.

  Hoping for your kind reply.

  Thank you

  NO

  Permanently delete files is a two-step process. First of all, you the trash and then switch to the view trash to permanently delete. You click on the trash and you should see the text "' look at a deleted files." with a blue link to the right to "Show all files". " See screenshot:

  

  If you have permanently deleted files then there is a problem.

• Why have I not more volume of applications than the total storage space?

  Why did I 124,24 GB of applications if the total storage space is 121 GB? That's happened?

  

  Please rebuild the Spotlight index. If you try to search now, there will be an indication that the indexing is in progress.

• LUN ESXi 5.1/store data not visible in trying to 'add storage '.

  I just added two 300 GB hard drives in my RAID, reconstructed and checked that the size has increased in OpenManage, but I am unable to actually increase the size of the data store residing on the RAID from the vSphere client. See photos attached. In photo 1, you can see the new size in OpenManage. In photo 2, you can see the data store I want to enlarge. Refresh or rescan everything has no effect. When I click Add storage, you can see in Picture 3 that there is no warehouses to choose. It's the same thing in November when I added a drive, but it was under warranty and a remote Dell technician in and did some fancy table/file system partitions while SSHed in to solve the problem. What I have to do the same thing or there at - it another way? If the former, how?

  I solved this through the command line. I followed the instructions at more a local data store from the command-line in vSphere, ESXi 4.x and 5.x.

  If you were stuck in the GUI as I was and you will find the daunting command line, just pay attention to what each step says you and document what you do as you do, so you don't get lost. If you learn what you are doing as you do, it just makes sense.

• iPhone 5 c storage does not?

  I just got an iPhone 5 c with 8 GB of storage. I downloaded two applications so far, but does not match my storage. When I go into settings > storage and use iCloud > manage storage, it shows me how much storage, I used, but the amount each app contains does not match. I use iOS 9.3.4. Here's what he said:

  Used: 1.8 GB

  Available: 3.2 GB

  Pokémon GO: 187 MB

  Instagram: 31.3 MB

  Contacts: 5.0 MB

  Photos: 4. 3 MB

  Mailing address: 2.2 MB

  The rest of the applications are for little that they do not add anything at all. Why my phone say I used 1.8 GB when I have not yet used 500 MB? Any help is appreciated, thanks! Also, sorry if this is the wrong tag, I haven't posted here before!

  The operating system. iOS takes a storage space on the device.