Web access SX10 refused to connect

Similar Questions

• Can not connect to web access SX20 after factory reset

  Hi all

  I have a problem when I reset factory SX20. I finished off SX20, then hold the power button for 10 seconds until what he puts to Flash. Then press the power button twice. I don't know it have already been reset factory state yet.

  But after this, I can not connect by web access. I can ping to SX20. but I can not connect on the Web or Telnet and I don't know what are the admin user and the password.

  can you help me for this?

  Please, help me to check it out.

  Thank you all

  If you are able to navigate to the login screen by using a web browser, the default username is "admin" without password.  Telnet is disabled by default.

• Invalid connection file (vWorkspace Web Access)

  We receive the following error message on each first launch of an office published in vWorkspace Web Access

  

  On every second try the error will not occur.

  What could be the problem here? We lack vWorkspace 8.0 MR1

  We stumbled on this article: https://support.software.dell.com/vworkspace/kb/94234

  We have removed all special characters from the name of the application and name complete, but says not helped.

  Any help would be appreciated!

  Solve this problem using this post > http://en.community.dell.com/techcenter/virtualization/vworkspace/f/4827/t/19557970

  "

  The solution was to change according to the value of "true" to "false" in the web.config file in the inetpub directory

  Path: C:\inetpub\wwwroot\\web.config

  
  
  
   
     
     
     
     
     
     
     
     

  "

• After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

  Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

  You are not authorized to view this page
  You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

  Please, try the following:
  Contact the Web site administrator if you believe you should be able to view this directory or page.
  Click the Refresh button to try again with different credentials.

  Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
  Internet Information Services (IIS)

  Technical information (for support personnel)
  Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
  Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

  Thank you for your help.
  Najib

  Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

  If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

  If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

  (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

  • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
  • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

  -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

• Since the installation of the latest version of 4.0b12, I am unable to connect to any https through a proxy site. Connection works if no proxy is involved, with the proxy, I get a message like "proxy refuses the connection". Thank you for your answer

  I am connected to the network of the client and I should use a proxy.
  I successfully authenticate to the proxy and I try to access https://mail.google.com.
  I get a message that the proxy refuses the connection.
  I noticed that this happens with all https sites.
  If I connect with my mobile internet stick without proxy, I am able to connect: the combination of proxy and https is a failure.
  Other computers on the same network with different browsers can connect to https via the proxy.

  I work with the development of Firefox on this team. As far as I know, they seem to think that there are 2 or 3 different with the same symptoms or very similar problems, all involving proxies. They think that they have set their all for RC1.

  Right now, it seems that we just want to test an early version.

  You can get that here:

  http://ftp.mozilla.org/pub/mozilla.or.../Firefox-4.0b13pre.en-US.Win32.installer.exe

  Install this somewhere (not in your current installation directory), quit all instances of Firefox and try it. I would like to know if it works.

• Satellite Pro A100-828 refuses to connect to the internet with modem MDA Vario 2

  I have an Equium A60 which I use regularly as a modem for mobile internet access. Still, it connects to my MDA VARIO 2 (HTC Tytn) and gives quick access.
  However I just bought a Satellite pro a100-828 who, for some reason, refuses to connect to the internet through this phone.

  T-mobile want nothing to do with the problem and that it is a conflict between the phone and the bluetooth stack Toshiba. The phone has always look like that is going to connect and then to computer recording connected to the screen network switches the modem feature phone.

  As you can guess I'm sitting at the old equium typing this so if anyone can shed some light on this I would be very happy?

  I tried to uninstall the bluetooth stack.

  The fact that your old Equium was connected via BT to this modem?
  Perhaps a Bluetooth stack of new version of battery BT facility allows or you can try to use the same version of BT stack that is installed on the old notebook

• Satellite P100-160 refuses to connect to my router 3Com with WPA - PSK

  Help! My new laptop Toshiba refuses to connect to my router 3Com (f/w 2.06T13) model 3cWDR100A on WPA - PSK. The router only supports TKIP (no AES).

  The laptop, a Satellite P100-160 is under Vista Home Premium with the latest Intel 3945 11.5.0.32 driver and I tried the version of the site Web of Toshiba version mentioned in other threads (and a few other versions also).

  Either way, I don't like latest driver hit with content identical binary files and different date stamps or running of the anonymous installers that have not been digitally signed.

  The problem is that non-encrypted, or WEP works perfectly, but WPA - PSK is not. It fails with a diagnostic message 'timeout for secondary keys. The thing will be very occasionally connect to the network without a timeout (before I tried to improve things with the last pilot about 1 in 20 attempts after a reboot, now it comes rather from 1 to 100). If I can be sure that the password is correct. When it connects everything is fine and stable with excellent signal until the first suspended and then the connection is lost. It's more than a little irritating.

  I see several topics of doom similar networks to Vista support groups. They all seem to hinge around WPA - PSK TKIP and WiFi Intel chipset x 945 in combination with certain models of router. Please can anyone help solve this mess?

  I've seen other threads of networking in Vista by users with this specific Intel chipset and my router model having exactly the same problem and so far nobody has found a solution. I checked the basics of knowledge (MS & 3Com) and tried a few plausible fixes, but nothing helped. I'm out of ideas.

  It seems a little absurd to demote network security to make the latest PC works correctly. Dumping Vista (however tempting) is not an option.

  Thanks for any suggestions or diagnostics.

  Kind regards
  Martin Brown

  Hello Martin

  As you can see this is not Toshiba specific stuff and if there is no 'global solution' I don't really know what Toshiba should do about it. As you all know it should support hardware and software (driver), but if not I don't really see a solution for this.
  Who should offer a solution? Toshiba or Intel?  :|

• 2012 Server r2 RD Web Access

  Hello

  I just upgraded my small office of about 25 users many remote users to Server 2003 R2 Server 2012 and I'm not a Windows guru. The old layout was remote users used a connection remote desktop to connect to the Server 2003, where they got their own user profile as Favorites files, documents, xls, etc. files. He will live these files on the local server running RD Web Access. I would move to RD Web Access but may not know how they will see their profile of office files. I've created a collection of session and that works very well to view the applications that run on the server. Don't know enough about what options are available in Rd Web Access? Can someone tell me how to proceed? Have also created the user profile drive, I do not see where is linked or not. Thanks for any help on this.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 will not update

  Today, I upgraded my Vista Ultimate Edition of Windows 7 Ultimate and checking the updates it listed 10 important updates. I went back in and there was still the major update 1 "Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 (SP2) who refuses to update which results in an error. I tried several times with the same error that results. Any suggestions as to why?

  The update could not update with no error code, just says 'update failed." However after that restart and check the view of the update the update again must have occurred because it is no longer returns in search of updates.  Thanks for responding to my problem

• Web access is mandatory for ePrint for printer LAN?

  I concede that I'm swimming against the tide, but I categorically refuses to connect anything of mine to 'The Cloud'.
  (My WiFi connections have a 63 bytes Pseudo-aleatoires WPA2 AES key for some reason.)

  But everything I've seen on ePrint seems to require that I create a HPConnected.com account (I have two 2 HP OTHER accounts) and main goal of this seems to impose a so-called 'benefits' to 'The Cloud' on me, if I want to that they or not.

  All I want to be able to do is to print to my JO 8630 Pro from my Android phone or my iPAD AIR when in range of my WiFi Access Point.  I don't want to print when I'm away from my local network.  I don't see 'services' in the 'Cloud' I can't live happily without!

  So, what is needed to achieve this?  I searched for clues and returned empty.

  Any help gratefully accepted...

  Hello

  The HP ePrint servier require connecting to the cloud, as it is a cloud of serviece to allow printing from a remote location (beyond your local network).

  To print from your mobile devices, you can use AirPrint, generation of HP in print for Android or the HP ePrint mobile App solutions everyone does not require to register for HP connected to exploit.

  Below, you can all ways to print from an Android device:

  http://support.HP.com/us-en/document/c03679829

  And below for iOS devices:

  http://support.HP.com/us-en/document/c02796271

  For all those, 3rd and 2nd options don't require any account of cloud.

  Shlomi

• Microsoft Outlook Web Access S/MIME

  I have problems with my webmail.  It worked fine for a long time and all of a sudden when I connect but get the following pop up:
  Microsoft Outlook Web Access S/MIME
  The feature you are trying to use is on a network unavailable resource.

  After click on cancel the next pop up says:

  An installation package for the product Microsoft Outlook Web Access S/MIME cannot trading.  Try the installation again using a valid copy of the installation package 'mimecInt.msi '.

  I can't fix the problem.  Any suggestions?

  Hi Cricket523

  Welcome to the Microsoft Vista answers Forum!

  We would like to know what version of Internet explore that you have installed on your computer.

  I suggest measures are:

  Option 1:

  Try resetting Internet Explorer and check if this is useful:

  To reset Internet Explorer settings there is a difficulty to reset the settings of Internet Explore. Link below will help you with the same

  Reset Internet Explorer 7 http://support.microsoft.com/default.aspx/kb/923737 settings

  Reset Internet Explorer 8 settings

  http://windowshelp.Microsoft.com/Windows/en-GB/ff6cc789-e857-439D-a384-08bfa45354271033.mspx#E6D

  Manually the steps to reset internet settings explore

  i. close all Windows Internet Explorer or Explorer Windows that are currently open.

  II. Click Start > Control Panel > Internet Options

  III. click on the Advanced tab and then click Reset.

  IV. in the dialogue box reset Internet Explorer settings, click Reset.

  v. when Internet Explorer finishes restore settings by default, click Close, and then click OK.

  VI. close Internet Explorer.

  Your changes take effect the next time you open Internet Explorer.

  Option 2:

  If the problem persists, contact forum Office and outlook, for better support options. Link below will help you with the same

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internal error Windows 8.1 has occurred when using web access

  I've recently updated mij PC to Windows 8.1.

  When I connect our departure from en Portal Web Access request I get the following error: internal error occurred.

  Details:

  OS: Windows 81. x 64

  Connector version: 8.0.1186 from the fix 271675

  I was wondering if there is a work around for this problem?

  Concerning

  Misha

  Hello

  Not bad at all. I'm happy to get it out to you guys.

  Looks like Michel has just blogged about this too, which means that he is now on our main Web site and can be downloaded on https://support.quest.com/SolutionDetail.aspx?id=SOL115599 where everyone is after him.

  Thank you, Andrew.

• Failed to load Web pages. Have network connection.

  Hello. I have a HP Pavilion with Windows 8.0. I've updated to 8.1 via the MS site a couple of months.

  Windows did an automatic update yesterday and now none of my browsers will take care of all the pages. I'm in Chrome and IE. My network connection shows good being, with internet access. I can connect to the network with my other devices. I ran the connection network and network adapter troubleshooting. The resolution of NIC detected problems and correction of an error, but still no pages will download.

  Help?

  Hey Kevin,

  Thanks for posting your query in Microsoft Community.

  I understand that Internet Explorer does not load Web pages. I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.
  However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This happens with all sites or with any specific Web site?
  2. You make changes to the computer recently after the upgrade to Windows 8.1?
  3. What security software is installed in the system?

  The question may arise for various reasons, including firewalls third program antivirus is blocking the connection or proxy connection problem. In the order

  Method 1:

  I suggest you run the troubleshooting Internet Explorer Performance Troubleshooter and check if it helps.

  1. Drag from the right edge of the screen (if you use a mouse, press Windows + C ) and then tap or click Search. Enter the Troubleshooting in the search box, and then tap or click settings.
  2. Press or click Troubleshooting in the search results pane.
  3. In the window of the incident, tap or click view all.
  4. Press or click Internet Explorer Performanceand in the Performance of the Internet Explorer window, press or click Next.
  5. Follow the instructions on the screen to run the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  The question may also arise if Internet Explorer moves all the graphics and text rendering from the CPU to the GPU (Graphics Processing). So, you can check the Web sites after enabling or disabling hardware acceleration for hardware or software compatibility with some websites display.

  Please, try the following steps:

  1. Open Internet Explorer.
  2. Click on the Tools icon in the upper right corner, then Internet Options.
  3. Click the Advanced tab and under Accelerated graphics, select the checkbox made software use instead of GPU rendering . Clear the check box if it is already selected.
  4. Click applyand then click OK.

  If the problem persists, try the following method.

  Method 3:

  Add-on Internet Explorer, such as ActiveX controls and browser toolbars, are used by some Web sites to provide a better browsing experience. An error may occur if an add-on is damaged or if an add-on conflicts with Internet Explorer. To determine if the error is caused by an add-on, run Internet Explorer in "no Add-ons" mode

  Here are the steps:

  1. Press the Windows key + R, type iexplore - extoff and click OK.
     (Internet Explorer opens in mode without modules)
  2. Test Internet Explorer to verify that it works correctly.

  If the problem occurs not in Mode modules no., then check out the link below.

  To manage add-ons in Internet Explorer, you can consult the following link:

  Manage Add-ons in Internet Explorer

  In addition, see the procedure for Internet Explorer on Windows 8 was provided in the following article:

  Can't access some Web sites in Internet Explorer

  Note: The steps for Internet Explorer 10 on Windows 8 also apply to Internet Explorer 11 on Windows 8/8.1

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• vCenter web access do not allow me to generate shortcuts

  Hey guys,.

  This is the first time I've been watching this.
  I connect to vCenter Web Access with my credentials (I have admin rights in vcenter) and I get to see my inventory.
  Returns the right info as expected for all objects (data centers, files) but when I click on a virtual machine on the right side is empty.
  I expected to see the Summary tab, because that's where I generate my shortcuts but there nothing at all.

  Any ideas?

  
  See you soon

  Hello

  You try to access the vCenter through a vSphere client installed on the vCenter server or PC remotely?

  This problem happens on the summary only tab?

  Kind regards

• Listener to refuse the connection with the following error ORA-12505

  Hi everyone, Am really new to the oracle database, I work on my school project work and am stuck in the middle of this error (listener refused the connection with the following error ORA-12505).
  
  I started the time serveral listener and it is said that 'no service supported by the LISTENER', I can't access the database via sqldeveloper including trows on the same error (listener refused the connection with the following error ORA-12505, TNS:Listener currently know of SID given in connect descriptor.) In addition, my em show red arrow down to the listener. Here are my coordinates hard & software.
  
  
  Oracle 11.1.0
  OS: Red Hat Enterprise Linux 4 (running the operating system through Vmware workstation)
  TNSNAME. ORA
  
  LISTENER2 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  ((ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  )
  )
  
  AUDITEUR1 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  
  
  
  Listner, ora
  
  
  
  
  LISTNER_ORCL
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  )
  
  IMT_ADMI =
  (= DESRIPTION
  (PORT = 1522))
  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = imt_admin
  )
  )
  
  LISTENER_IMTADMIN =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  
  I read on some forums that I need to edit somethings that am not sure cos I don't want to mess with the database, I need help on what to.
  Thanks for the help in advance.

  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))

  Try to edit listener.ora by:
  (ADDRESS = (PROTOCOL = TCP) (HOST = HOST_NAME_OF_YOUR_DATABASE_MACHINE/OR TRY USING THE IP ADDRESS OF THE DATABASE SERVER MACHINE)(PORT=1521))
  Just try to edit HOST = value line above. You must use HOST_NAME_OF_YOUR_DATABASE_MACHINE or IP OF the DATABASE SERVER MACHINE.

  Host name can be obtained by the hostname command on the database server.

  With localhost, no one can connect to the database remotely.

  Concerning
  Girish Sharma

  Published by: Girish Sharma January 11, 2013 18:26

  then after the output of commands below:
  lsnrctl stop
  lsnrctl start
  Wait 60 seconds...
  ORACLE_SID =
  sqlplus scott/tiger@tnsname

  Show us what is happening now.