WebCam Satellite C75-A-143 does not work

Hello

I have a Satellite C75-A-143 with Windows 8.1 and the webcam is not working. The BIOS is enabled (I've already checked). The camera does not appear in the section device administrator... I tried to download the driver but there is no driver in the Web of THOSIBA site for the camera. The closest is an EXE called "gesture". However, when I try to run, it pops up an error with ID007. Can you hep me?

Thanks in advance

Finally I found the problem. There was a problem in the administrator of the device with the USB ports. Removal of this device, the webcam appears (even if the camera is not incorporated by USB)

Tags: Toshiba

Similar Questions

  • Webcam on my Toshiba NB305 does not work

    Sorry to invade this question, but I couldn't figure out how to post a question that tells you how stupid I am.

    The webcam on my Toshiba NB305 does not work.

    When I go into programs he says neveer me a wizard will popup, but it does.

    Help.

    Hello

    Why you don t try to reinstall the webcam software?
    I think that the software is corrupt and who knows why.

    Visit the European driver of Toshiba page, choose your model of laptop, choose webcam software, download this and reinstall.
    Before beginning a new installation, you must remove the previous version

  • Satellite A10 S203: sound does not work - just enough

    Hello!

    To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

    Any tip?
    [email protected]

    First check the status of the sound card in Device Manager.
    If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

    Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

  • Satellite L300 (PSLB8C-0H901X) does not work

    My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

    Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

    As you know this is part more expensive so you need to check if this is the solution for you.
    Call, explain the situation and let it check your laptop.

  • Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

    Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

    Hello

    Check with Toshiba support, online documentation and drivers (update or reinstall), and
    ask in their forums.

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    ========================================

    How to activate Audio devices hidden in Vista and Windows 7
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer (you want to be sure
    the mic input is enabled)
    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

    -----------------------------------------------------------------------------------------------------------------

    Pilots may also need to be updated:

    Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
    Audio (this is an example and you can have an other name/maker).

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
    and then install the latest version. Restart and check after each test, not
    rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
    installed shows upward on the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check see the
    Disconnected devices and show disabled devices - check your micro - highlight
    then on lower right properties. Make sure that the appropriate injector is selected and check
    other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change
    .

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

  • Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

    Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
    Can someone help me?

    Thank you

    Hi Largo09,

    Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

    As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

    In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

  • Satellite U920T - function keys does not work after update to Win 10

    Hello, good morning / evening...

    I use (U920T satellite) and recently updated my Windows 10 Tablet
    but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

    I tried to restore the system and update the driver software but nothing has worked...

    I use these keyboard shortcuts all the time and now it's really hard without them!

    What is the problem? What should I do?

    The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
    But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

    For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
    http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

    Maybe you can try the drivers released for other models of portable Win 10 supported...
    I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

  • Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

    Hello world

    Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

    I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

    I boot on my USB (made with RUFUS), but it works once for each five times.

    After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

    How to install Ubuntu?

    Hello

    This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

    The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

  • Satellite A500 - 14Q - Microphone does not work

    I have the Toshiba satellite A500 - 14Q for about 3 years. I changed the hard drive, keyboard, frame of the monitor until now, and I'm sick and tired of this laptop does not properly. Now, I've discovered that my microphone does not work. There is no problem in device, or with the driver manager. I hear that crackling noise when I try to enter any other micro device.

    Can anyone help please?

    P. S. I have windows 7 (64-bit)

    How did you test the mic feature? With the help of tool tape recorder?
    > the monitor framework
    Perhaps you have made a mistake and mic is not connected correctly. Did you do it alone or it was done by the Toshiba authorized service provider?

  • Satellite A210 - FN buttons does not work on Windows 7

    I have a problem, just install Windows 7 Build 7100 (fron upgrade Vista 32 bit) and the fn on my Satellite A 210 does not work corectly.
    It only works with the action of the num pad, other functions does not work.

    What should I do to make it work?

    It seams that I have problems with the actions of Toshibas tool whitch controls but I can't find name to update...

    Hello!

    I put t understand why Windows 7 is so popular right now it s only a beta version

    However, I think that the reason for this is why no Toshiba tool is available at the moment, but I can understand that because Windows 7 is not yet out.
    You can try to install the package of value added. This is for Vista, but maybe it works also on Windows 7 being the most drivers for Vista works on Windows 7 too.

    Consult the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite A100: Recovery DVD does not work

    I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

    I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

    However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

    What is the problem with that? How can I really use this recovery DVD?
    Someone help me please.

    Thank you.

    Hello

    The recovery procedure is not difficult.
    Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

    Your problem is very strange. You have created all the partitions on the HARD drive?
    I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

    Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

  • Satellite L775 - mouse pad does not work properly

    I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

    What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

    What's past and how to fix this?

    Thank you very much.

    > What's past and how to fix this?
    After reading your ad, I still don t know what is your problem.
    > My mouse pad is not working properly
    How to understand this? What does not work properly? What happen exactly when you start your laptop?

  • Satellite Pro L300 - touchpad does not work

    Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

    http://www.ISD.Toshiba.com.au

    and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

    I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

    Hello

    > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
    I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
    I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

    In your case, I recommend this controlled again.

    By the way; My touchpad is always disabled so that en external mouse is connected.
    It is parameters that control it. Please check in your touchpad properties too!

  • Satellite Pro M10 - infrared does not work properly

    Hello

    I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click Troubleshoot to start the troubleshooter for this device.

    However, under Driver Details is said:
    C:\windows\system32\DRIVERS\smcirda.sys

    I extracted the zip file in my home directory of c:\downloads\infrared.
    whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

    Thanks in advance for any help.
    Chris

    Hello

    If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

  • Satellite Pro 4270 - USB does not work

    Hello.

    I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

    I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

    The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

    IrDA works very well.

    Some suggestions please. Thank you

    Hello!

    I understand, were you solder the module USB motherboard and then solder another module?

    I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

    Best regards

    Pete v.

Maybe you are looking for

  • Satellite A210 crashes

    I have a similar problem with my A210 I bought in March 08. It will crash and eventually not even not start. I had to take it to a dealer, and it turned out that I had a bad copy of Vista. The tech did a system restore and used the copy of Vista soci

  • Satellite M30-344-CPU cooling fan noise

    Hello world...I have a satellite m30 344... it is 1 1/2 year... and now, I had a problem with my cpu... fan is making a horrible noise... and the air flow is not good... I'm looking for how clean my fan... I removed the keyboard and I also took into

  • Error 403 on the HP ePrintCenter website

    Hello I have just bought a HP Photosmart printer and like to register on the HP ePrintCenter website. However, I get all sorts of "403 Forbidden" errors on this site: When I select a different country and language (using the button at the bottom of t

  • IdeaPad S500 Touch - screen goes black after driver update

    I have a Lenovo IdeaPad S500 Touch. It is running the latest update of Windows 8.1. He proposed an update of the video driver from Lenovo. After downloading and installing the update, the screen went black. When the computer reboots, the Lenovo logo

  • frozen hotmail account

    Hello I can receive emails on my account. But I can't open them? It has been like that for a few days. can you help me? My account doesn't let me do anything excpet newspaper which is very annoying! What's happening at the time of my emailaddresses *