weird folders created every reboot!

Similar Questions

• volumes for OrgUnit or group of members are created every 4 hours

  Hello

  By default, the volumes of the new OrgUnit or members of the group are created every 4 hours.

  Is it possible to control / change this time?

  The 4-hour polling period is not editable. However, please note that this is just for the pre-creation of the writable for users. If a new user is added between the voting periods that a write will be create on the fly for this user. So the first connection may take a little longer, they should always get writing as expected.

• Can I export bins/folders created in Premiere Pro CS6 on the desktop?

  I recently started a slideshow project in Premiere Pro. I organized all the images in the first by bins and began the project, although another software (ProShow Producer 5) caught my attention, and I would like to continue the project in ProShow. Although my bins are organized inside the first, and it would take me hours to go in the records and take the correct pictures again for the new project. My question is, can I export bins/folders created in first on my computer? I know that the folders created in the first are not real, but it is there any pissiblity to reproduce photos and place them in the bins/folders shown in the first? This way I can have all the ogranized files and ready without having to do it all again.

  Are there plug-ins that convert the first bins in the physical files?

  Any help would be appreciated.

  Thank you.

  Short answer: No.

  As you say yourself that they are but simple links to files on the hard drive.

• Files and folders created in the root of C: are deleted after reboot on computers with AppStacks attached.

  Users using Visual Studio had created the C:\work folder to store projects.  After the restart, whatever it is created at the root of C: had disappeared. Is this normal behavior or the result of one or more of installation contained in the C:\ root and thus managed AppStacks by AppStacks.    Is there anyway to tell that AppStack could be the cause in addition to test each individually?

  Thank you

  It's actually expected as the operating system behavior is essentially be virtualized when an AppStack is attached. All changes to the operating system are stored in a folder called SVROOT on the volume system (C :). This folder becomes "visible" when an AppStack is attached and therefore virtualization is enabled.

• Why don't Microsoft automatically deletes files in temporary folders of windows every reboot, month...?

  It's basically my question above.  I saw exe virus, just sitting on this issue for years.   Maybe there should be a limit on how long a file can live in this folder. Microsoft should set policy or give the user the opportunity to choose this time.  What is an example

  of the program that needs to live in this temporary file for more of:

  -An hour?

  -A week?

  -A month?

  -A year?
  

  I noticed now with Windows 8, type folder to access the folder, making it difficult for me to delete the files.

  Example of records

  ===========

  c:\Windows\Temp\*.*

  c:\Documents and settings\johnSmith\Local Settings\temp\*.*

  This is for all versions of windows:

  Because Windows has no way of knowing if it is done by the process that put files with them or not.  If it deletes files that are still in use, bad things will happen.

• Folders created automatically with $ in the title

  Suite much clean files and removing the 'old' with a remote hard drive connected, when I rebooted my laptop I found three records were created automatically in the C drive and I don't know what they are, or why they were introduced.  They're called $RECYCLE. BIN, $INPLACE. ~ TR and %WINDOWS.~Q

  That means these and what can I to their topic please?

  Thank you

  $INPLACE. ~ TR and %WINDOWS.~Q - it is for Vista (I couldn't find the version of W7 if its there somewhere?) http://support.Microsoft.com/kb/930890/en-US , see the sections of 'more information' and 'workaround '. More info here - http://www.howtogeek.com/howto/6685/what-are-the-inplace.tr-and-windows.q-folders-and-can-i-delete-them/

  $RECYCLE. BIN - is the bin for this drive. You're probably showing "protected system files.

  Open Solution Explorer, select the drive, click on [organize], click on 'folder and search options' click on the [view] tab, and see if "Hide protected files operating system (recommended)" is checked.

  See also - http://windows.microsoft.com/en-us/windows/change-recycle-bin-settings#1TC=windows-7

• I can't delete a duplicate named folders created in error by Thunderbird while moving messages with drag and drop

  I had created a folder with a long as name "Deborah Brown - HP laptop acting, very slow, etc." this file was created to contain messages that have been received in a top-level folder, and then moved to this to the appropriate ranking related emails many. I had done many times before without a problem. But this time, when I slipped and fell on a message in the folder a double was created, but accompanied by an annex of '2547417' at the end of the name. IIRC, the message was in the records at the time of the original and a copy. IIRC, I did not notice this at first and when I dragged/left down another message he created another folder in double, but this time with the suffix "211613d". At any given time more far in the process (I don't remember quite well how) both of these files got duplicated again but this time were with the same name with added suffixes as noted... something I wouldn't have imagined. Given that the messages I was moving were safely (?) stored in the original folder, I deleted the message content duplicated records duplicated without any problem and without any effect on the content of the original file.

  Then I tried to delete the duplicate folders... not allowed. Then I noticed that if I tried to remove the second instance of each duplicate name, which was a success... at least as much as to move it to the trash. If I then returned and tried to delete the first instance it is, once again, not the law. I then tried to rename the files by adding a prefix a single character. Once more, if I worked on the second instance of the name I could rename it but would be foiled again if the first instance. Then, * I think * (extra large grains of salt here) is that I renamed the second instance and removed from the trash that I could then work on the others and rename and empty the trash.

  But everything for nothing. If I closed Thunderbird and restarted the duplicate folder names reappearing. Then I tried the fix given for not being able to delete messages because of a corrupt trash folder. That did not help either. Even if I use a POP account and could remove the files from the two basket my account information, whenever I would restart Thunderbird trash will reappear by himself and the so-called deleted duplicate files right with her and in the hierarchy of their original folder.

  I'm mystified and have given up trying to remove these things. Fortunately, the removal of messages from other folders and empty the trash of these messages seem to work normally. I have not yet tried to delete another folder and hesitate to do.

  Thank you
  Chuck Norcutt
  Murrells Inlet, SC

  Thank you very much. Exactly, that solved the problem. There was almost no delay in starting. I'm still very curious as to how it happened, but it may never be known.

• Progress bar on every reboot.

  Greetings,

  I recently did a clean install of El Capitan on a drive in my Mac Pro 8-core (early 2008). First, I installed Snow Leopard (10.6.3) DVD, then I installed the 10.6.8 update, then El Capitan on the App Store. Everything seems to work fine, but every time I leave the Mac of this player, I get a progress under the gray apple icon bar. The bar gets to half way through, and then I get desktop, icons, etc. (i.e. a normal startup). This is something that I expected to see after I installed an update and rebooted, but not every time thereafter. I'm not 100% positive, but I do not think that this was happening until I installed Recovery Update 1.0 and iTunes 12.3.2 on the App Store. Or was there from the beginning, and I just did not notice it? What is the new normal for the home screen in OS X?

  Thank you

  DM

  It is perfectly normal and nothing to worry about. It has become the norm with Yosemite and continues with El Capitan.

• BlackBerry apps of Q10 lose and e-mail account to every reboot

  So, basically, every time that I reboot, I set up my camera like new again.

  I lose my email, contacts and calendar, apps.

  I did 2 factory resets and 2 wipes of security. Progress only that I did, is that now my login ID Blackberry (bbm, app store) is like my wifi settings.

  At least I spent 4hrs doing talk to Rogers customers and support can only make the updates at night that I NEED my phone to do my job.

  Annnd to 10.2.1.2976 and working again. Thank you very much for your help!

  I miss my 10.3 and mix already! I hope that corrections are in the pipeline.

• Print spooler is corrupted after every reboot.

  original title: corrupt Printer Spooler

  I have huge problems with my spooler.  I tried every fix I found on this site, and they work.  Until my laptop is restarted, then Windows 7 seems to be obsessed with restore corrupted files.  It seems he has programmed it to file backup that runs the joint.  We have renamed the files, we ran all the scans here, we did things together of dependencies (which has never worked in a first time.)  When I do the scans, it is said he found and repair corrupt files.  Then I turn off my laptop.  Turn it on, VOILA!  Corrupted once more.  I really don't want to, or don't I think I should have to, go through the trash whenever I want to print.  I want a permanent solution, please.

  Hello VxShady,

  I lived the same problem and your last message gave me a few ideas, leading to the following solution worked for me.

  1. Open a with right click command prompt and use the option "run as Administrator".
  2. SFC can restore the version appropriate for spoolsv.exe, "sfc/scannow".
  3. Start the spooler service to confirm it works and set to start automatically.
  4. Open a Windows Explorer with the right-click and use the "Run as Administrator" option.
  5. Navigate to the Windows\System32 folder, right click on spoolsv.exe and choose the properties option.
  6. Check the read-only check box, and then click OK.
  7. Copy the file spoolsv.exe on the desktop for good measure.
  8. Reset.

  The program or service that replace your file with a corrupted version spoolsv.exe should now be unable to crush them. For me, this solves the problem, and the spooler service starts automatically after reboot.

  I hope it helps you too!

  Best regards, Dave

• Change the default permissions for the folders created by the Weblogic process

  Hi guys,.

  We have IPM application running on Weblogic 11 g. It has a java process (Oracle InputAgent calls) which creates files on the Linux server.

  We find that this agent is to create these folders with unique permissions (owner rwe group - r).

  It dose not the group to write or execute permissions.

  Even if the parent folder has read writing performance group, the weblogic process creates with only read access to the group.

  Also, if you create a folder under the same parent using Linux command he created with read, write, execute access to the group.

  We want to know if it is controlled by weblogic config? And is there a way that we can change this default permissions?

  Also, we noticed that - Djava.io.tmpdir location records has also created with the same permissions. So believe this is controlled by the setup of weblogic.

  Please advice.

  Thank you!

  Neal.

  There two things that affect it:

  1 umask - this is defined in the script of startWebLogic.sh and if you change it, the files created by weblogic will use the specific permissions in the mask except when sometimes case 2

  2. the java process when you create files or folders specifies the authorization. In this case, there is nothing you can do unless you have the source code to change.

• From LR6.1 to LR6.3: rename folders created are based on the date of importation rather than the date of shooting!

  I started using LR with version 2... My import workflow was even up to 6.1 and all my files are organized in the same way for more than 10 years.

  I went on LR6.2 given the changes made in the import dialog. But upgraded to LR6.3 think the problem has been resolved.

  But now I noticed that all my photos are renamed and placed in folders corresponding to the date of importation rather than the date of shooting... I rename my files from custom and is gone in this dialogue, but has not as how to restore LR import my photos using the date of shooting. This creates havoc on my hard drives and in LR. I use the date of shooting a lot to find my photos, since I often neglect to add keywords.

  I really need to be able to get the date of shooting on the behalf of my photos and have copied them in the folder the correct date.

  Thanks in advance for your help.

  BTW: something has changed in the way the forum appears. Research is not very powerful... it has not brought something, yet I know that the import dialog has been at length when 6.2 was introduced. In addition, I see no browser passed a few more recent messages. I don't like the new interface.

  Well, I answered my own question. Yes, I was looking for settings in the destination Panel... There is a line that shows what would change the name... and it showed the date of importation as the new name... but actually... It was only to show you what the name change would look like. Because I had a selected image, I thought it would show that the change of name for this image. But it is not related to the image... The import worked as expected... My apologies for disturbing him. .

• T110 II - Windows 2012R2 Storage Pool corrupts every reboot

  Hello

  I have a brand new II T110 and added two HGST sister NAS (6 TB) drives for the drive of 1 TB SATA boot and load 2012R2.  Boot drive works fine.

  HGST both drives are in the detected (Auto) BIOS and Windows can see very well.  If I created a Storage Pool and readers, all is well.  I create the pool, to a mirrored virtual disk and then place a volume on it.  Everything works very well.

  I then reboot the server and the Storage Pool faints and disks show metadata corrupted.  I can reset the readers and recreate a pool and the same thing happening at each reboot.

  HGST reader tool retrieves the two disks and they test ok, so I think that wise things of material should be ok.  Two storage spaces Windows is so broken for discs 6 TB, or there is some other incompatibility with these drives, HGST.

  Anyone who has used 6 TB SATA disks in a T110 II and know all the problems?

  Thank you

  As I do not leave messages without answer, the answer is my server Dell PowerEdge T110 II was also recording event 129 ' restore the device, \Device\RaidPort0, was issued "and 153 of the event" the i/o operation to the logical block address 0 x 0 for disk 2 (name AOP: \Device\00000043) was retries. "for two disks in the pool of storage at boot time.  Apparently, this then causes the shoot to disconnect.  Despite a re-navigate reads correctly readers.

  On moving a channel SATA 2-1 disc (the second disc is on 3) one of the disks is no longer this set at startup and if Windows can initialize the storage pool that he can read the drive meta data.  The two drives appear healthy when initialization is complete.

  No idea why this server records these events because the readers/server otherwise appear very well.  No Intel RST drivers do exist, so there is no way these errors impact software.

  I guess it's a hardware or a bug in the BIOS using discs of 6 to on this server, but there is a solution.

  Of course if the drive channel 1 past default offline there is a chance for the storage pool would not initialize because the drive channel 3 always gets this single e/s on startup error.  But a "Rescan" storage would bring it online.

• Why push modules like 1 - click Download? Every reboot brings it up.

  1 - click download is "pushed" into its own tab whenever I start Firefox. I am responsible to stop smoking "Firefox start" unless it can be stopped. The message is equivalent to, Oh boy! Here's the biggest news on the Earth:
  You're ready to start! Version 2.0.9 - Compatible 22.* FireFox.
  I don't want or any other nonsense to me, Firefox compatible 22 sales or NOT.
  WHAT does take (not to mention that switching to Safari or Chrome) FOR STOP THIS?

  Why do you have installed the addon then? Contact the developers of the addon on this issue. Also to create a new profile, if the new profile does transfer of the old stuff (if you wish).

  • Use the Profile Manager to create and delete profiles Firefox
  • Recovering important data over an old profile

• Find my place of bookmarks in the folders created can not find?

  When looking for a bookmark, I put in a folder created during the search for her, he finds the bookmark but does not show he was placed in the folder.

  just a little addition to what Ed wrote.

  After installing the extension, you'll need the column 'Parent folder' menu in the library list view columns, or by clicking on any column header in the library list and choose the columns you want to display. Also in the Add-ons options there are two additional options available and suggest that you check the "show folder hierarchy.

  I see that now all referred to in the description and the photos in the page extensions add - greatly improved documentation.

  You can check this page as well as for assistance to work with bookmarks. http://KB.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox