Weird start with 32.1 screen

Similar Questions

• HP Pavilion dv6000 (Vista) starts with a blank screen with a cursor after the original hp logo screen.

  HP Pavilion dv6000 (Vista) starts with a blank screen with a cursor after the original hp logo screen.  Cannot get it to boot Windows.  Any thoughts on next steps?

  I remove the hard drive and attach it to your desktop and use the host operating system to run a check disk on your drive.  The laptop goes hard disk looking for instructions to start and he does not see the correct code.  This is probably due to a damaged boot sector.  Another idea is that your bios has changed and you have changed the SATA from AHCI to IDE type somehow or vice versa. You also left a non bootable disk in the DVD/CD drive.  Remove all disks from your DVD.

• Windows Vista starts with a black screen with the mouse cursor

  Hello

  I bought a new Toshiba laptop with OS Windows Vista from Best Buy. At time of purchse that Best Buy does not give me the Vista OS software, they said that the operating system is already installed in the laptop.

  Now, after a year, I have problems with the laptop. The Vista starts with a black screen with a mouse cursor. Before writing this issue, I searched some tips to solve the problem as

  (1) by pressing F8 while the computer is on and select it the option "last good known Configuration (Advanced) option." but it didn't work.

  (2) by pressing F8 when the computer is turned on, then turn on the option 'System repair Option', it did not work.

  (3) by pressing F8 when the computer is turned on, and then select the option "" safe mode / Normal mode option "Unfortunately she also did not work."

  Could you get it someone please let me know how I can solve this problem.

  Thanks in advance

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a startup repair, etc.:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you're up a new drunning.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 starts with a black screen (since the last update), if I go to the Task Manager.

  * Original title: startup error

  Windows 7 starts with a black screen (since the last update), if I go to the Task Manager and processes there are 2 sessions of "run once container" if I stop or another (they are two different size) windows lights up normally.

  Can someone help me please?

  Hello

  Thank you for the information.

  System Restore helped to heal the cause (last option of course)

  not sure about the Windows update that seemed to start the problem, but it is 2 instances of run once Wrapper were running.   I have found that if black screen you started the Task Manager, then selected and close it, either run it once windows Wrappers would begin.

  Anyway thanks for your help, we are now healed.

• Pavilion H8 - 1240t starts with a blank screen!

  From time to time my old Pavilion of 2 years with an AMD Radeon 7070 graphics card will start at a white screen and will continue to restart over and over again until I have pull the plug. Apart from that, a mess the PC works fine!

  How I managed to do it starting right now has been by reinstalling the video card and removing the battery on the motherboard for a few seconds. Is this common? What exactly is causing this problem?  HP Tech offers no answers whenever I call them?

  Hi bigollo, sometimes the bios gets into a loop and the solution is what you've done, remove the battery from the motherboard is reset the settings, you have to return your graphics card? fact the pc works fine now?, thanks, Adi.

• Windows XP starts with a black screen and hangs for two minutes before the end of the boot process.

  Original title: Windows xp slow at startup delayed to the office after you download the updated April 8,2011

  First time after updating, would start then black screen can see the cursor then took 20 minutes before Office input... now does the same thing but just a few minutes. What happens all started after the recent update April 8... something about a NET update? any IDE how to fix?

  Hi kaeli,.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you can start fine.

  Step 2: If he is able to start fine then try try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  See also:

  Computer stops responding with a black screen when you start Windows XP

• MBP does not start with corrupt initial screen

  while I was watching a YouTube video last night, and then all of a sudden the screen went black with a second audio loop 1 - no response other than the button works / stop.

  turned it off and back on again.

  I get the grey screen with the apple logo, but I have jagged lines across the screen (a slight green tint).

  the progress bar goes to about 75%, then the screen flashing with a big green bar on the screen, then goes completely gray and then restarts - it repeats and it never completely starts.

  It's a macbook pro 15 "end 2011 (high resolution display).

  have tried resetting the SMC and PRAM - makes no difference.

  is the maximum now?

  Here is a video of what happens when you start - https://goo.gl/photos/Lyaa2jVT9WYRMvB38

  Make an appointment with an Apple store genius bar.  It seems that your MBP falls in this replacement program:

  https://www.Apple.com/support/MacBookPro-videoissues/

  Ciao.

• Windows starts with a blank screen and a functional mouse cursor

  Recently my HP laptop turned off by itself, when I resarted, I got was a white screen with a functional mouse cursor.

  There is no logon screen or anything just a blank screen. When I'm in safe mode then it will display "safe mode", written in the four corners and the top center of the page other that the version of windows that's died.

  When the laptop starts, it displays the windows XP startup screen then turns off and that's it.

  I don't know where to go or what to do any help would be greatly appreciated.

  Hello

  Have you made changes on the computer before this problem?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer can only display the wallpaper, a black screen or a blue screen:

  http://support.Microsoft.com/kb/318027

  For more information, see the following Microsoft article.

  http://support.Microsoft.com/kb/314503

  Hope the information is useful.

• Why is my second screen does not work - it starts with my main screen, but then turns off.

  My HP Pavilion P7-1120 Desktop PC does not work with two screens - there 8gig of ram...  1.5 terabyt hard drive, Windows 7 64-bit primary system works via the VGA port, but the second screen does not rest via the DVI port.  The two normal startup with the start-up of information on both screens, then the secondary display stops and I get a message "no signal".  Both monitors worked with my laptop PC and older myDell...

  When I go into the control panel and the view tab - the PC does not recognize the second monitor.

  GEO...

  It's not a problem with my PC or whatever it is in the box.  Cables work on other screens of the RGA and DVI.  There is a problem with my screen - the works of port RGA, is not the DVI port.  Another monitor works properly by the DVI.

  Now fixed.

  TKS for the entry.

  GEO...

• Vista starts with a black screen

  original title: Windows does not...

  I have Linux in stalled as well as Windows Vista. When I turn on my computer and GNU GRUB appears there are 3 options of Windows - vista, xp embedded and the recovery environment. No matter which one I click on the black screen with a underscore in the top left corner appears and never goes away. Vista came pre-installed on my Acer laptop and I don't have an installation disc. Pressing F8 does nothing.

  Is it fixable or do I need a new drive?

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, Acer is usually Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Once put to the factory settings; How you bought.

  This includes wiping clean HD

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here's a way to make and use a Vista startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows starts with a black screen

  original title: my system is Windows vista ultimate on Toshiba Satellite A205 when booting display turns off after the departure of his windows and still run but not visual__ material

  Help

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista does start with a black screen no mouse pointer.

  When I try to load vista is going just a black screen... the little green bar moves and jumps, then black screen. I am able to run in safe mode and I try to run notron and I get and internal program error code: 0x8007045a.  I can't connect to the internet as well as in the safe, do not know if this is normal. I doint at currintly run a restore in safe mode to see what happens.i am able to run the Startup Repair tool, but it does not solve the problem. If I bring the details of the problem, that's what I get

  problem event name: Startup Repair v2
  signature of the problem 01: auto failover
  signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  problem signature 03:6
  problem signature 04:262148
  signature of the problem 05: no root cuase
  signature of the 06 problem: no cause root
  problem signature 07:0
  signature of issue 08: 1
  signature of the 09 problem: System Restore
  problem signature 10:0
  OS version 6.0.6000.2.0.0.2561.
  locale ID: 1033

  Try to start in safe mode and in the type of research start devmgmt.msc and press ENTER.
  In Device Manager expand adapter screen and try to turn off the graphics card and verify if you are able to boot into normal mode.

  Also try to access http://support.microsoft.com/kb/929135

  Follow the steps described in the article and see if you can boot into normal mode.

  Hope this helps you solve the problem.

  Concerning

  Srini

• Vista starts with black error screen arr2 arr3

  Original title: CODE ARR2 ARR3

  running vista boots to black error screen arr2 arr3 someone can tell me why and maybe tell me what to do to solve the problem

  Hi sdyess,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  When you start a Windows Vista-based computer, the system may stop responding (hang) at a black screen

  http://support.Microsoft.com/kb/946532

• Windows Vista starts with a blue screen

  original title: I have a computer laptop advent 9617 pre-installed with vista hp boot up im facing a blue screen with the widows vista word highlighted and the high treble beeps to fully boot I have to press on enter, then pc works ok, or an option to press f8 fo options

  on startup blue screen apears with widows vista highlighted, with treble beeps do press on enter to continue, it's a laptop advent 9617 preloaded with vista: p of curries

  Hello

  ·        Are you able to boot to the desktop normally after the passage of this screen?

  ·        Have you tried going into safe mode and checked what happens?

  You can try to disconnect all the external devices connected to the desktop computer and check out what is happening. You can also try to do a startup repair and check if that helps. Follow the link for more information.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 starts with a black screen

  I am running windows 7 32-bit home premium, when I start my camera, it starts normally but when I'm in the log on screen, I just get a black screen and nothing happens, I tried to use the application and windows recovery windows problems but I have results not been.
  side note: my device allows to run in safe mode

  Boot your system on a system repair disc.  If you don't do not have one yet, find another job 32-bit Windows 7 machine and make a.  It's simple.  You will need to a blank recordable cd or dvd.  Start, all programs, Maintenance.