Western Digital passport ultra USB 3.0 does not connect

Similar Questions

• USB modem broadband does not connect after upgrade to XP Pro

  I use a high modem flow Cricket to connect to the internet, but lost the connection from the upgrade of XP Home, XP Pro. I have a Compaq nx6310. Recently upgraded to Windows XP Professional (ver 5.1, service pack 3) The Cricket Modem plugs into the usb port. Now, I get the error message "a connection to the remote computer could not be established. You may need to change the network settings for this connection. "Received error 720: PPP settings on my computer and on the remote computer do not match. (see screenshot below)

  Firewall is configured correctly to allow the modem in Windows Firewall and my anti-virus program.

  I have determined that it is not the modem because it works correctly on the borrowed laptop.

  I spent several hours on the phone with the internet provider and it was determined that the modem is working properly according to the diagnosis, they talked me through as well. It was at this time tech ISP suggested that I have to contact HP.

  Any comments would be greatly appreciated. Thank you in advance for any ideas or suggestions.

  

  Problem solved after hours even over the phone with Cricket.

• Western Digital Passport essential does not eject on Windows 7

  This "response" just to change the subject.  He spoke in XP disk "is"ready to be ejected"", and so on. "  but the problem here is Windows 7, there is no such situation "ready to be ejected.  The rest of the 'response' comes from an impossible situation.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/western-digital-passport-essential-cannot-eject-on/c0aa270f-cf7a-e011-9b4b-68b599b31bf5

  Hello

  Facing this problem with other USB devices as well?

  Here are possible causes:

  • In most cases, this is caused by antivirus or anti-spyware installed on your PC application. You will need to contact your specific anti-virus or publisher of anti-spyware to help determine if this is the case.
  • If the disk contains a partition NTFS, indexing can be activated.
  • There may be some other third party software which is still accessing the drive.  This software is most often safety, management of storage or backup utilities.
  • If your disk contains WD SmartWarr it can actively scans your system. Make sure you have stopped all operations of backup progress.

  You can consult the following article;

  http://wdc.custhelp.com/app/answers/detail/A_ID/274

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Return to the State of the question

• Western Digital Passport Essential cannot eject Windows 7

  I have a Western Digital Passport Essential 320 GB for daily use. Whenever I have to eject it from my home PC (Windows XP SP3) desktop tool to remove the device safely, it will be stop turning after 5 to 10 seconds and ready to pull the plug.  But it didn't happen with my laptop (Asus 1215P + Win 7). Whenever I try to eject, it will not stop spinning while waited for 30 minutes.  While computer Win 7 says that the disc was successfully deleted and do not find in the menu.  The solution is to turn off my laptop, unplug the drive and then turn it back on. But it's too much loss of time.
  Is there something wrong with WD Passport when you work on Windows 7?  Please help me...

  Hello

  If a USB key is attached to the XP computer and is "ready to be ejected", you will notice that the light is off. XP stop actually all power and data transfer to the USB device.

  Windows7 does not, therefore, you will notice that there is hard disk activity yet, but it should be safe to disconnect it from the computer.

  After that, the hard drive must stop and you can then use the power switch and the power off of the external drive.

  I also suggest you look in the device, with the connected player manager and see if there are power options, such as to turn it off or turn it off when not in service or after a specific time period.

  To develop, this feature is by design, it allows people to continue to load specific devices (phones, mp3 players, etc.) once they were ejected from the aircraft.  Once you have removed your device safely, you will incur no damage even if the light is still on.

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• USB 3.0 does not work on HP Pavilion 23 g010

  USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...

  Hello:

  Your model has an AMD chipset and processor.  Therefore, the Intel chipset driver will not work.

  First, install the AMD chipset driver and restart.

  You want to download the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If there is any other drivers you need for this model, please let me know.

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• HP OfficeJet 4650: HP utility does not connect to my new portable printer HP OfficeJet 4650 of my connected USB MAC

  Utility HP does not connect to my new HP OfficeJet 4650 of my Mac connected usb portable printer.  I have to turn off the printer, printer and try again sometimes that works.

  Welcome @grizley1967.

  Thanks to their participation in Forums of HP! I see by your post that the HP utility connects to the printer. I will definitely do my best to help you.

  Make sure that the printer is connected directly to the Mac with the USB cable.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Select the startup disk in the list of volumes.

  Click the first aid tab.

  To verify permissions, click on verify disk permissions. To fix the permissions, click on repair disk permissions.

  Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Is there a download from Microsoft which will create a bootable usb media that does not have the drivers?

  Original title: A bootable Windows 7 media

  I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.

  Thank you

  Matt Armshaw

  Windows 7 or Windows 10 come preinstalled?

  If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:

  -Disable the secure boot UEFI

  -Disable the quick start

  -L' install created media can be corrupted.

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  I suggest that you try to create another bootable copy.

• BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

  We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

  SlaKir wrote:

  The answer is YES

  Well, then your USB port is likely.

  Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

  Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

  Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

  Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My application does not connect with a USB

  How can I connect Adobe preview with a USB? It does not work.

  Thank you very much. Disabling the firewall has helped one of my machines and I found this one too intant. I had to uninstall McAffe.

  Thanks for your help.

• Peripheral USB does not connect to the guest operating system

  Hello

  I installed VMware Server 2.0 on windows server 2K 3 Enterprise. I also installed a new guest OS win 2 k 3 standard.

  My question: during the attempt of USB connection in the comments, it does not connect. It shows the error like: "an error occurred while trying an operation connecting an USB device between the host and the guest. Please check the Device Manager of Windows for the current state of the USB devices attached to the host. "in the events.

  but the usb device works fine in the host operating system win 2 company 3 k. the log shows that:

  16:23:58.671 Jan 08: vmx | USB: Device connection 0 x 400000409306545

  16:24:43.578 Jan 08: vmx | VMXVmdbLoadUsbDevices: New series of 0 USB devices

  16:25:03.421 Jan 08: vmx | USBG: CONNREQ: corresponding request head after 123675 ms for the name: Toshiba\ DataTraveler\ 2.0 vid:0930 pid:6545 path: 1/4/4 speed: high family: storage

  16:25:03.421 Jan 08: vmx | Msg_Hint: msg.usb.win32.connectionError (sent)

  16:25:03.421 Jan 08: vmx | An error occurred while trying an operation connecting an USB device between the host and the guest. Please check the Device Manager of Windows for the current state of the USB devices attached to the host.--

  ---

  explored in the vmware communities but in vain.

  Roline

  See the entries related to USB in my computer FAQ - link is in my signature

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• iTunes does not connect with my iphone 6

  I updated my phone and itunes for recent versions, and when I try to connect my device with itunes, it does not connect. My computer says that my phone is connected but my itunes doesn't work. When I connect my phone, a notification appears saying "allow this device to access the photos and videos? Nothing appears saying "approve this computer? I restarted my computer several times and my phone but it still does not connect. I tried the update of the driver portion, but he says it's updated, but when I go to view the file "Apple Mobile Device USB Driver" it does not appear on my computer.

  Have you tried the following steps:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  If so, you may also want to see excellent iTunes to turingtest2 for troubleshooting Windows guide to:

  Troubleshooting problems with iTunes for Windows updates

  especially the chapters containing Apple Mobile Device Support.

• iTunes does not connect with any of my devices 1-itouch 2-iphones

  I have connected my itouch to my computer (usb) and itunes does not just I tried of recognized her. I tried to connect my both iphones and the same result - nothing.

  I tried all usb ports - nothing.

  What is going on??  I have the latest version of itunes and io in my devices.

  I search on google and it said something about apple usb driver, but I do not want to download from any site or don't know what the right answer.

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  3. open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. If you do not hear the sound, and you have tried other cables so perhaps you have some Lint in the port that prevents a correct contact. Inspect with a flashlight and a magnification of class. If discovered gently teasing with something non-conductive like a toothpick.

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library.

  TT2