What are user sessions?

Similar Questions

• What are users with Cisco 802.11n 802.11ac WLAN APs running on Low Power?

  Experts Sars WLAN,

  I'm new on a big installation WLAN here and noticed that not only the AIR-CAP2702I-E-K9 communicate on the Management Station first central and many changes of low-power 2.4 GHz antenna power level.

  People here tell me that it is not harmful, but I am slightly dubious and would like your opinion here.

  WLAN access points are activated with 2.4 and 5 GHz-antennas and shoot only 15.4 Watt following switch.

  Interface Admin Oper Power (Watts) class of device
  Of the PS to the device
  --------- ------ ---------- ---------- ---------- ------------------- -----

  Ba3/4 auto on 17.3 15.4 4 AIR-CAP2702I-E-K9

  First is revealing:

  "APis running on Low Power." Please disable Radio one and reset the access point to get full power on the other radio. »

  The access point is configured for 802.11n on both bands and 802.11ac on 5 GHz.

  I can also see many Power Level change on the 2.4 Ghz antenna.

  Here people are complaining about downtime on laptops for SAP applications.

  Also a voice over WLAN installation does not work very well.

  But I don't know if this has something to do with low power.

  What are the consequences for WLAN users in this scenario?

  Changes in the level of power can cause interruptions to users of WIFI?

  Is 'Low-Power' - Situation responsible for a large amount of sending changes to feeding on 2.4 GHz?

  Who knows more and has experience with low-power facilities?

  Thank you for any comments on this

  Wini

  Just to add

  What are the consequences for WLAN users in this scenario?

  * Anything, just change really the number of antennas is used

  Changes in the level of power can cause interruptions to users of WIFI?

  * Change in power level, do not make changes to string

  Is 'Low-Power' - Situation responsible for a large amount of sending changes to feeding on 2.4 GHz?

  * No.

  Who knows more and has experience with low-power facilities?

  You should focus on your environment and what you see. With low power due to the PoE does not affect the user experience.  If your access point changes the power too high or too low, you can introduce some poor duplication of coverage or channel.  If you are also in a building/space tenant shared, other installs nearby Wireless will affect your RF and yours will have an impact on their. Nothing we can do.  You must set customer issues before assuming what is wrong, that nothing could be wrong.  The updated client drivers is also a good thing to do to eliminate this problem.

  -Scott

  Please evaluate the useful messages *.

• What are user defined variables (UDV)?

  I'm trying to debug an application in real time and have worked on known issues for LabVIEW Real-time 2011. There is a term called "user defined Variables (UDV)" that opens occationally document known issues with other documents. It seems that UDVs can be created under target FPGA but I am unable to find any useful information on them. I know only local, global, shared, single, variable IO process.

  Hi Lucie,.

  The /o Variables using the help documentation gives a pretty good explanation of what a user-defined variable is in the section "data i/o Variables for Custom FPGA of e/s". I hope that this documentation helps!

  Best,

  tannerite

• What are user Points? Please explain to me

  Can someone please explain to me the point system and how it works? Thank you

  Hi Devirtaza,

  The points system is used to help determine a reputation for people in the forum. You get points for messages, replies, blog and other. In other words, more we are on the forum the more points than us.

  Copper = entry
  Bronze = 6-249 points
  Money = 250-1499 points
  Gold = 1500-5999 points
  Platinum = 6000-14999 points
  Diamond = 15000-750000 points

• What are some of the requests of users likely to be assigned to an officer IT worked at the Department of STI?

  What are some of the requests of users likely to be assigned to an officer IT worked at the Department of STI?

  Hello taki5910,

  This issue is beyond the scope of this forum.

  Please post this question on the TechNet forums:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Best regards

  Matthew_Ha

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What are the differences between pga memory max session and pga session in memory?

  Hi all

  What are the differences between pga memory max session and pga session in memory?

  SELECT s.sid, n.name, s.value FROM v$ sesstat s, v$ statname n

  WHERE s.statistic # = n.statistic #.

  AND n.name = 'pga session in memory. "

  SELECT s.sid, n.name, s.value FROM v$ sesstat s, v$ statname n

  WHERE s.statistic # = n.statistic #.

  AND n.name = 'pga memory max session ";

  
  

  
  

  Note that I have read the documentation. However, it is not clearly explained.

  
  

  Thank you
  

  John Stegeman wrote:

  I agree with the comments of the Ed, NightWing.

  You do not have a story to ask questions that are clearly answered in the documentation.

  Mind your own business. If you answer the question, so answer! Otherwise, please stop the thread engrossing.

• Can I update my single-user plan in terms of the Adobe creative team? and if so what are the steps?

  Can I update my single-user plan in terms of the Adobe creative team? and if so what are the steps?

  Hello

  Please contact adobe for the same support:

  Contact the customer service

  In the meantime, you can also consult:

  Creative cloud for teams. Adobe Creative Cloud for businesses

  Hope this information is helpful!

• What are the hours for the sessions from tomorrow

  What are the schedules for the sessions from the 'tomorrow' or how to plan my own schedule?

  The materials for each week, starting March 31, will be available on the main page at 12:00 (midnight) GMT/UTC.

  The complete schedule is here: Details of the schedule for the MOOC (March)

• all 255 Essbase error 101 user sessions are used

  Hello
  
  I'm trying to connect to EAS and I got the following error:
  
  all 255 Essbase error 101 user sessions are used
  
  I have right to administrator, you're wondering how to fix it?
  
  Thank you

  Hi Donny,

  You can do this easily with MaxL:

  http://download.Oracle.com/docs/CD/E17236_01/EPM.1112/esb_tech_ref/maxl_altsys.html

  Alter system set session_idle_limit  seconds/minutes 
  

  Kind regards
  Robb Salzmann

• What are the features available in controller to find connection user details

  Hello world
  
  
  What are the features available in controller to find connection user details
  
  ex: Using String userId = String.valueOf (pageContext.getUserId ());
  
  We can find the login user ID
  
  Similarly we can find user login name, profiles, etc.
  
  I want to just list the features available in the controller of the user of the connection...
  
  
  Kind regards
  
  Krishna

  Hello Krishna,
  You can find

  pageContext.getUserName ();
  pageContext.getResponsibilityName ();

  pageContext.getResponsibilityId ();
  pageContext.getOrgId ();

  etc...
  in Jdeveloper type pageContext. ' Ctrl + space bar ', you can find the list of available methods.

  Kind regards
  Naren.

• Check the permissions of a user session

  I have a problem with a supplier 3rd party application

  The application is very poor (this requires access s/n)

  I believe that the application performs the following operations when a user connects

  User1 create a session

  It's round fires a trigger or procedure (I can't see the code for as it is encrypted)

  The trigger allows User1 a tas bunch of roles, then runs the sql statement in the User1 and him revokes roles (even if the declaration of the User1 is still ongoing)

  Sometimes the the User1 sql statement can take a few hours to run

  During this time, it is possible to check what are the roles granted to the session of the User1?

  I think at one of the tables $ x will have the answer

  This is a Dev env and there is nothing in the dba_audit_trail

  G.

  The REDO logs will have all THE statements that have been executed.

• Why this user session becomes a timeout and disconnected?

  Hello

  I have a few users are disconnected from their display the session with a message saying that their session has expired.  It's strange, because the user will be logged into their office work and all of a sudden, they are back at the login screen terminal wyse.  If they try to reconnect, they are picked up directly on their desktop.

  I found that the messages of debug log on the view connection server.  Why is the disconnect session after the user was registered for 599 mins?

  2014 01-13 T 17: 06:13.148 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [al] (5AED_ * _B627) Session expired: stop

  2014 01-13 T 17: 06:13.160 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [EventLogger] (5AED_ * _B627) Warning_Event: [BROKER_MACHINE_SESSION_TIMEDOUT] 'User null timed out Session': Source = com.vmware.vdi.ice.server.al, UserDN=cn=s-1-5-21-903304000-123605126-2484215475-1892,cn=foreignsecurityprincipals,dc=vdi,dc=vmware,dc=int, time = Mon Jan 13 17:06:13 CST 2014, seriousness = WARNING, [redacted] = node, Module = broker, recognized = true

  2014 01-13 T 17: 06:13.160 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [EventWorker] (5AED_ * _B627) initialization EventWorker

  2014 01-13 T 17: 06:13.161 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [al] (5AED_ * _B627) notify timeout fatal error to the client: secure connection timed out (the session has expired, please login again.)

  2014 01-13 T 17: 06:13.161 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [al] (5AED_ * _B627) Client doesn't support the client or client-error timeout error. User will not see this message of timeout.

  2014 01-13 T 17: 06:13.162 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [al] (5AED_ * _B627) requested stop Lite session: Session expired

  2014 01-13 T 17: 06:13.162 - 06:00 INFO (0BFC-0CCC) < Timer-0 > [ay] (5AED_ * _B627) end of session [redacted] user Secure Gateway Server - session ID: 5AED_ * _B627

  2014 01-13 T 17: 06:13.163 - 06:00 DEBUG (0BFC - 00 0D) < outbound JMS Forwarder wire > [bj] point on queue "Outgoing JMS Forwarder" 816 US, queue length = 0, available workers = 0 on 1

  2014 01-13 T 17: 06:13.163 - 06:00 (0BFC - 0D 00) DEBUG message < outgoing JMS Forwarder wire > [l] sending JMS: disconnect

  2014 01-13 T 17: 06:13.164 - 06:00 DEBUG (0608-1FA8) < MessageFrameWorkDispatch > [MessageFrameWork] System::IsWorkerInstalled

  2014 01-13 T 17: 06:13.164 - 06:00 DEBUG (0608-1FA8) < MessageFrameWorkDispatch > [MessageFrameWork] System::WriteWindowsEvent

  2014 01-13 T 17: 06:13.165 - 06:00 (0BFC-1E64) < EventWorker (customer) > DEBUG [JMSCluster] not found: pae_jms.properties, using the default values.

  2014 01-13 T 17: 06:13.165 - 06:00 DEBUG (0BFC-1E64) < EventWorker (customer) > [JMSCluster] JMS env: {}

  2014 01-13 T 17: 06:13.166 - 06:00 DEBUG (0958-0DA8) < SwiftMQ SessionPool 3 > [ManagementFilter] received message from the tunnel server Logout: Type: (MapMessage\Logout);  Headers: [server, TunnelGeneration, TunnelVersion, _MS_MSGIDENTIFIER, _MS_SIGNATURE, capID, toBroker];  Body :{}

  2014 01-13 T 17: 06:13.167 - 06:00 DEBUG (0958-0DA8) < SwiftMQ-SessionPool-3 > [UserSessionTracker] successfully consolidated UserSessionTracker (sessionId, userId = [deleted item] = 9399_ * _3e49)

  2014 01-13 T 17: 06:13.167 - 06:00 INFO (0958-0DA8) < SwiftMQ-SessionPool-3 > [Audit] BROKER_LOGOFF: USER: [redacted]; USERSID: [redacted]; UTILISATEURDN: [redacted], [redacted];

  2014 01-13 T 17: 06:13.167 - 06:00 DEBUG (0958-0DA8) < SwiftMQ-SessionPool-3 > [EventLogger] Info_Event: [BROKER_USERLOGGEDOUT] "[redacted] the user has disconnected": Source = net .propero .modules .properOps .UserSessionTracker, time = Mon Jan 13 17:06:13 CST 2014, seriousness = AUDIT_SUCCESS, node = [redacted], TotalUsers = 6, UserSID = [redacted], BrokerSessionId = 9399_ * _3e49, Module = broker, UserDisplayName = [redacted], recognized = true

  2014 01-13 T 17: 06:13.168 - 06:00 INFO USER (0958-0DA8) < SwiftMQ-SessionPool-3 > [UserSessionTracker]: [redacted]; USERSID: [redacted]; UTILISATEURDN: [redacted]; has disconnected from VDM

  2014 01-13 T 17: 06:13.168 - 06:00 DEBUG (0958-0DA8) < SwiftMQ-SessionPool-3 > [ManagementFilter] invalidate session (timeout = 1 s): 93993c2b_d4ed_461e_8060_afe98bef3e49

  2014 01-13 T 17: 06:13.168 - 06:00 DEBUG (0BFC-1E64) < EventWorker (customer) > [JMSRouter] JMS Direct connect: [name = ROUTER1, username = null, password = null, siteName = null, swiftMQHost = localhost, 4001 = swiftMQPort, swiftMQSocketFactory = com.swiftmq.net.PlainSocketFactory, swiftMQKeepAlive = 60000, usingJNDINames = true]

  2014 01-13 T 17: 06:13.168 - 06:00 DEBUG (0BFC - 00 0D) < JMS leaving Forwarder Thread > [l] sent MapMessage in 4 ms

  2014 01-13 T 17: 06:13.175 - 06:00 DEBUG (0BFC-1E64) < EventWorker (customer) > [JMSRouter] JMS Direct connect: [name = ROUTER1, username = null, password = null, siteName = null, swiftMQHost = localhost, 4001 = swiftMQPort, swiftMQSocketFactory = com.swiftmq.net.PlainSocketFactory, swiftMQKeepAlive = 60000, usingJNDINames = true]

  2014 01-13 T 17: 06:13.964 - 06:00 DEBUG full sync (0958-0EC8) < Thread-50 > [TrackerObject]: DomainHealth: [redacted] version: 3071

  2014-01-13T17:06:13.965-06:00 DEBUG (0958-0EC8) <Thread-50> [TrackerManager] Sending message: (TrackerMessage SYNC {}: {v=3071, tn=DomainHealth, u=[{"type":"SET","item":{"name":"ATTR_DOMAIN_NAME","type":"STRING","stringValue":"[redacted]"}},{"type":"SET","item":{"name":"ATTR_DOMAIN_DNS","type":"STRING","stringValue":"[redacted]"}},{"type":"SET","item":{"name":"ATTR_DOMAIN_STATE","type":"STRING","stringValue":"OK"}},{"type":"SET","item":{"name":"ATTR_DOMAIN_TRUSTTYPE","type":"STRING","stringValue":"PRIMARYDOMAIN"}} ,{"type":"SET","item":{"name":"ATTR_DOMAIN_CONTACTABLE","type":"STRING","stringValue":"FULLYACCESSIBLE"}},{"type":"SET","item":{"name":"ATTR_DOMAIN_ISNT4","type":"STRING","stringValue":"false"}},{"type":"SET","item":{"name":"HEALTH_LAST_UPDATE_TIME","type":"LONG","longValue":1389654373964}}], nn=[redacted], oi=[redacted]})

  2014 01-13 T 17: 06:15.925 - 06:00 INFO (0958-0DD8) < DesktopControlJMS > [Audit] DISCONNECTED: server: cn = [redacted]; DNS: [redacted]; IP: [redacted]; USER: [redacted]; UTILISATEURDN: [redacted]; BROKERUSERSID: [redacted];

  2014 01-13 T 17: 06:15.925-06:00 INFO user (0958-0DD8) < DesktopControlJMS > [DesktopTracker] [redacted] disconnected from machine [redacted] office vdi - session allocated to 13 January 2014 7:06:24 AM CST, connected for 599 dry 47 mins

  2014 01-13 T 17: 06:15.926 - 06:00 DEBUG Agent (0958-0DD8) < DesktopControlJMS > [DesktopTracker] session counts for [redacted]: sessionCount = 1, pendingSessionCount = 0, connectedSessionCount = 0, disconnectedSessionCount = 1

  2014 01-13 T 17: 06:15.927 - 06:00 DEBUG (0958-1EAC) < 28771f0c-26cb-42c7-a27f-b6a15e40c9c6 > [DesktopTracker] onEvent: DISCONNECTED - username: [redacted]; DomainName: [redacted]; UtilisateurDN: [redacted]; UserSid: [redacted]; GroupSids:null; BrokerUserSid: [redacted]; ConnectionId:5AED_ * _B627; Protocol: PCOIP; CustomerName:; ClientAddress:; ServerDn: [redacted]; ServerPoolDn: [redacted]; ServerDnsName: [redacted]; DynamicIpAddress: [redacted]; ManagedObjectId:null; ID: [redacted]; State: disconnected; SessionGuid:d573-*-9d9b; PreviousSessionGuid:null; LoggedInAsDomain: [redacted]; LoggedInAsUser: [redacted]

  What is your session time defined under the display Configuration > global settings

• What are the best practices for use of GLOBAL Variables

  Hello
  
  Please guide how Global Variables can be declared and how they can be initialized.
  
  
  Further please guide what are the impacts of the Variables(if any) world on the memory of the CLIENT or the SERVER, if they are not initialized or released after use.
  
  
  Thank you.
  
  Kind regards.

  There are 255 characters (fixed) - or a less than before, don't know if they still are that length.
  My preference is not to use and use the settings or package variables. There is no real control of globals, so you may find yourself with an applications which has a good number of them which is used only once but which persists during the user's session.

• What are the KEYstroke (s) used to CLOSE the current tab in the web browser?

  What are the KEYstroke (s) used to CLOSE the current tab in the web browser? I hesitate to use a mouse where can I use sequences of keys, as the mouse is a much slower process. Indeed, to find a list of all the main features that can be used in Firefox, for example ALT + S, followed by R (or several times) and the ENTRANCE used to restore the last browsing session; or CTRL + F to search for a specific word or term? Thank you.

  CTRL + W closes a tab at a time. It also closes a window if there is only one tab open in this browser.