What cooling modules are comaptible with Satellite P105-S9312

Similar Questions

• What RAM modules are compatible with the Satellite A100-590?

  Hello

  I plan to upgrade the memory of my A100-590. At present, there are 2 x 512 Mo of RAM DDR2-533 Samsung inside. The motherboard supports PC2-4200 and PC2-5300.

  If I want to put 2 x 1024 MB DDR2-667. Now, my question is, RAM from other manufacturers such as Corsair, Kingston etc is also compatible with the jury?
  Thanks in advance for your answers!

  GMC

  they * SHOULD * be compatible with this machine, but I won´t dare to say they really are.

  Then it s even better to use the original modules because you can be sure that they are 1000% compatible with your laptop.

  Welcome them

• Is there a way to know if the current modules are compatible with the latest upgrade of Firefox before running the update?

  I want to know if my Add-ons and current themes are compatible with the latest update of Firefox before running the update.

  Hello azdec.

  You can check the add page - we in addons.mozilla.org so it's just one or two. In my view, there is an extensions in the Gallery of modules that allows you to see if your modules are compatible with the newer versions of Firefox. But you'll have to look for them, because I don't know how it's called.

  I remind you that if you want an add-on to be compatible with a newer version of Firefox, you must contact its author.

  In addition, the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.

• Cooling module often works on Satellite M100-126

  Hello!

  I have a problem with my new computer. It works well, BUT the fan works when the core temperature is about 34 ° C and stops when it comes down to about 30 ° C.

  If the fan works and stops quite often especially when I just use Word. So it's a bit noisy and I did not fund any solution to this problem. I tried all the possibilities with the Toshiba energy device but it is always the same.

  I would like to have a permanent fan running no stop and go. Do you think that I would have a better result if I update the Bios?

  Thant you for help me.

  Hi Pierre

  I think that there are not many things to do
  Is the BIOS to control the fans.
  The fan table that includes different levels of temperature is stored in the BIOS and this table fan tells how and when the cooling module has to move on.

  > would like to have a permanent fan without stop and go operation. Do you think that I would have a better result if I update the Bios?
  I understand you very well, but the update to the BIOS would only change this situation, if the table fan would change too. You can try to update the BIOS but I put t think that the table fan has been changed in the new version.

  Greetings

• Previous data of module are replaced with the charge of the latter

  Hi friends,
  
  Once the Planner data are loaded into the data warehouse and after that I see the data of the SCM module I have loaded before using the DAC in the BI dashboard in which he is visible in the BI dashboard before loading the module projects.
  
  And also after the data of the SCM module is loaded, I don't see Finance and HRMS data that are loaded before using the DAC in the BI dashboard.
  
  Im not sure this problem why load the recent module is superimposed on the previous module to download the data into the data warehouse.
  
  What is perhaps the reason for this problem. Dint always not the cause of this problem.
  
  Thank you
  
  Kind regards
  Saro

  Try to create a new EP with required modules do not check at full load.
  Once you build the new EP CAD tools use to reset the data warehouse and run the EP, the first charge would be assimilated at full load and followed loads are levels
  If you want to go full charge just reset the data warehouse and run EP

  Just in case if you want to add another existing module EP just add these respective fields and build the EP and start to run the EP. In this case, all the other modules are run as Incr Mode and the new module like the full Mode.

  It should work.

• What DVD players are compatible with Equium A60 PSA67E?

  my question; What dvd players are compatible for an equium a60 (psa67e-001001en)?

  background; I did a very stupid thing! while I was at the Japan and about 18 months after buying my a60 in the United Kingdom, the packaged dvd player. I replaced it with a teac dvd player and it worked like a dream! I threw the old disk (I think it was a matsu * has, but can't remember the exact model). in any case, I came home and had a little time on my hands, so I decided to set my machine and corrupted the windows xp registry.

  Now, windows xp runs in the loop, I can't access and I need to wipe the hard drive and start again essentially. I put the recovery disk in, but the computer doesn't read him and desperately wants his wacky way to windows. I believe that it is not recognizing the teac drive that I used to replace the old. I think that if I put an original return type, the firmware can recognize the drive and I'll be back in business... or so I hope!

  of course, all the other tips would be welcome too! Thank you.

  work around? PS a work around, I thought so... copy the contents of the diskette of recovery on a hard drive (using my old computer) can change the current hard drive in my a60 with it... theory; When the computer detects the content during the start-up, it will install xp on another part of this drive and I have a working machine once again. could - this something like this work? any thoughts?

  Post edited by: markchev66

  Hello

  Did you look in the manual of the user who is usually preinstalled on your laptop?
  There you should find information.

  I found these:
  Toshiba SD-C2612
  Toshiba SD-R6332
  Matsu * a UJ-811BTJA-A
  Matsu * a UJDA760
  Pioneer DVR-K13TBA
  Toshiba SD-R2512
  TEAC DW-224TH

  It is only a part of the list mentioned in the manual. Check it!

• Photos in the develop module are covered with red dots [was: I am really new to Lr and clueless...]

  I am really new to Lr and clueless... when I take my photos in the area 'Developing', they are covered with red dots like bacteria.  What I am doing wrong?

  In the top right of the screen to the point, you should see a histogram representing the tones of the image. It has a triangle shaped button in each upper corner.

  The left button displays blue Shadow markers for any areas that are at, or very close to, 'black '.

  The right button red poster to highlight markers for all areas that are at, or near, blow 'white '.

  Click these buttons to the markers on the image (toggle).

  (You can view markers temporarily, when turned off, flying over the buttons of the mouse without clicking)...

• What tv models are delivered with PaP?

  Which of the new smart led tv are delivered with the picture and the picture option?

  Hi Julio,.

  The KDL-46HX850 and KDL-46HX750 TV have the photo and the photo feature.

  You can see the features and order the televisions from the links below.

  http://store.Sony.com/webapp/WCS/stores/servlet/ProductDisplay?catalogId=10551&StoreID=10151&langid=...

  http://store.Sony.com/webapp/WCS/stores/servlet/ProductDisplay?catalogId=10551&StoreID=10151&langid=...

  If my post answered your question, please mark it as an "accepted Solution".

• What Ram modules are used in the Satellite Pro L870 18R

  HYA

  I m new to this forum so apologies if I posted in the wrong place.
  I just bought a Sat Pro L870 18R for my wife as a Christmas pressy.
  Before she gets to him I was going to increase the Ram of 4 GB to 8 GB.

  I know he has a single stick of ddr3 1600 Mhz in it, but without opening it you know which manufacturer to use Ram Tosh for this machine?

  I like to keep the same manufacturer.
  If I can at least give him a chance to run dual channel. I know I couldn't just take part and look like I m going to have to open it to adapt to the new ram anyway.

  I just i didn t want to keep o he packing and unpacking, and opening and closing upward are a gift after all lol.

  Any help appreciated thnk

  Above all the RAM brand is very important to get the RAM running in dual channel.
  It is important that the two RAM modules will support the same features.

  As far as I know the unit was equipped with a SO-DIMM 4 GB RAM DDR3 1600 module MHz (PC3-12800). I guess the reference is: * PA3918U-1M4G *.

  Welcome them

• Satellite L50-A-108 - what RAM modules are compatible?

  Hello!

  I have a C50-A-108 with processor Intel® Core i5 - 3230M (3 m Cache, up to 3.20 GHz) rPGA.
  I want to add a stick of RAM, and I wonder if this specification: DDR3/L /-RS 1333/1600 for my motherboard means that I can use a RAM DDR3L.

  My laptop has already installed a DDR3 RAM (1,600 MHz), so I found a stick DDR3L 1.5V 1,600 MHz with the same timings as my system and I want to buy it. Before that, I want your opinion.

  Thank you.

  Hello

  To my knowledge, the Satellite L50-A-108 was equipped HM70 mobile Intel Express Chipset. Is this correct?

  Express chipset mobile Intel HM70 supports 2 GB modules / 4 GB / 8 GB DDR3 1333 (PC3-10600) SO-DIMM and max 16 GB of RAM

  The Intel Core i5 - 3230 M CPU processor supports DDR3/L /-RS 1333/1600 modules and the speed of the module is related to the speed of the front side bus.
  http://Ark.Intel.com/products/72164/

  In the case where the FSB is limited to 1 333 Mhz, 1600 Mhz modules would be pointing down.

• What recovery CD to use with Satellite Pro L20?

  We have several Toshiba laptops in use in our society. I need to restore a (a Satellite Pro L20) to factory settings. However, although I have kept all the recovery CD, most of them have labels which do not mention which model they are intended to be used on. On some of them I wrote the model number on the label by hand, but I did not do that for the L20. I know from experience that if I receive the wrong recovery CD, I have to put dozens of drivers and utilities individually, in order to find the right one would save me a lot of time and stress.

  Each recovery CD has a number (for example GMR400626EN1), so it should be possible to identify the good CD of it, but I can't find the info on the Toshiba web site.

  Is there a list that corresponds to the reference numbers for the models of laptop recovery CD?

  Hello

  This info is certainly not available on the Toshiba support site. What you can try is to contact the partner of service authorized in your country. They have access to the database of Toshiba and I'm sure they can help you.

  If you need addresses and phone numbers please check https://eu.computers.toshiba-europe.com support & downloads search for an ASP.

  Bye and good luck!

• What wireless router works well with Satellite A200-401

  On the point of buying a computer laptop Satellite A200-401 can anyone suggest a good affordable wireless router that works well with this?

  Steve

  HM, this is a strange question because I doesn´t depends on the machine, the card information wireless installed. But in general a Netgear router is always a good choice... they are reliable, Don t need a lot of power and you can expand your network with these special Nergear '"Externders = range.

  I have a Netgear WGR614 and it works like a charm, it has everything you need.

  Here´s a link:

  http://www.NETGEAR.com/products/RoutersandGateways/GWirelessRouters/WGR614.aspx

  Check it out. :)

  Welcome them

• What optical drive is compatible with Satellite A30

  Hello

  Builtin of my DVD/CDRW drive A30-104 appear to be endangered (fails to climb most of the discs, just click a lot and trying / fails to turn upwards) so I need to go on the replacement of it. I have two questions:

  (1) the drive is listed as "Toshiba SD-R2412" and I found a lot of matches for this on eBay. However, some ads to mention a number of 3 additional digits (e.g., 202, 209 etc.) after the designation. -What this means and how to find the number of my disk (and is so important I)?

  (2) at - it a DVD burner available in the same form factor, and it would be likely to work with my laptop?

  Thanks in advance!

  Hello

  Additional portable players are numbers don't know about me and I don t know what it means.
  However, you should know that not all readers can be used in the notebook. The CD/DVD drive supports different master/slave/c-salt settings that are not editable and sometimes don't match with the laptop.

  This is why you should only use the readers recommended by Toshiba! As far as I know, different compatible readers are included in the user manual. Please take a look here!

  I found a support several readers. For example:
  TEAC DW-224TH
  TEAC DV-W22-85
  Toshiba SD-C2612
  Toshiba SD-R2412

  But as said above, check the user manual. All readers listed there

  Greetings

• HP Envy 700-229C: what graphics cards are compatible with the HP Envy 700-229C?

  Hello, I was looking for a graphics card for my HP Envy 700-229C computer but I don't know that his are compatible.

  @kabirvirdee, welcome to the forum.

  Any video card which is PCI Express 3.0 x 16 will work with your computer.  The video slot is a PCI Express x 16 (Gen 3.0).  You must ensure that the card insert in the space provided.  This can be done by measuring the back plate of e/s in front of the computer.  Also, you should check the power of the power supply unit (PSU) that is required.  The power supply of your computer is 460W.  The power supply must have at least more than the card requires 100W.  I love EVGA cards.  If you decide to buy one of their cards, you can contact their Technical Support (1-888-881-3842) to help choose the best card for your system.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• What hard drives are supported for Satellite 5100-201

  Hello!

  My drive is making some strange noises, might he have one foot in the grave...
  Have the latest bios 1.9. and the original at 30 GB disk.
  Have a Hitachi 40 GB I tried with, but the laptop did not.
  So I would like to know what drives and formats supported for this model.

  Thanks in advance!

  Hello

  Very strange did you use a compatible 40 GB HDD?
  To my knowledge, the laptop must be able to recognize the 40 GB HARD drive.
  As far as I know the 30 GB HARD drive that was installed is a Toshiba MK3017GAP and the computer supports a HDD of 20, 30, 40 or 60 GB.

  I think that these disc HARD must be compatible:
  Toshiba HDD2171B 40 GB HARD drive
  HITACHI G8BC00009110 40 GB HARD DRIVE
  Toshiba HDD2183B 60GB

  PS: The strange noise from the HARD drive could be the beginning of the end
  So make a backup of the data.