Software installation C6380 problems

Similar Questions

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Software installation problem

  I have a Windows Vista PC, I don't remember the problems with regarding the purchased software installation.  The last two software products, TurboTax 2009 Deluxe and Photo Explosion Deluxe not installing not.
  I've actually worked with the assistance of TurboTax and was still unable to get the software installed.  Photo Explosion is just sitting there.  When I insert the CD, it does not automatically start, and I have to run it through Run or enter my computer and selecting the Setup program.  I tried to play with the functions of security, thinking they have stop installation but at this stage I am not clear on how best to proceed.
  Any directive or suggested efforts would be appreciated.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Error scanner HP Photosmart 2575 during software installation complete

  Since I use Windows 7 x 64, I've only used the basic problem-free printer driver. Recently, I wanted to analyze a document, so installing the software "full" (AIO_CDB_2570_Full_Win_WW_130_141.exe).

  My printer is connected via ethernet on a home network.

  The software installs until the moment where he tries to connect to the printer/Scanner.

  I have uninstalled several times, also deleted the software using the L3 command file.

  Whenever the HP Digital Imaging Monitor tries to talk to the scanner, it reports the error:

  

  I made a new installation of Windows 7 X 64 ultimate, for a spare HDD, no active firewall, no antivirus installed - same error.

  HP Software Update installed all available patches.

  Always the same.

  Since it does not work on a new installation of Windows, but it will work via USB, it seems that there is a problem in the network connection.

  This HP document: "Scan cannot be performed because another program or computer uses the network device" message on the computer in Windows XP and Windows Vista when Scanning Over the Network has some steps I would like you to try. There is no specific measures of Windows 7, but the Vista section will still work.

  You are welcome to try all the Solutions, how ever I think that the only Solution two, three, five, six & seven steps are necessary.

• For microsoft office 3,1,5 avery Wizard software installation cannot find Microsoft Word

  Original title: the software installation wizard for microsoft office 3,1,5 avery will install on vista home basic. error comes up cannot find microsoft word. what I'm doing.

  as I mentioned above, I can not install avery Office Assistant 3,1,5 will not install with Vista Home Basic. error comes up cannot find microsoft word. What should I do?

   
  Hello
   
  What Microsoft Office version do you have installed?
  
  You can follow the methods mentioned in the article in order to help solve the problem.
   
  Avery Wizard Setup cannot locate word
  http://support.Microsoft.com/kb/288387
   
  Hope this helps
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Intel Chipset Software Installation Utility, v.9.1.1.1019, A01

  Nobody knows exactly what this update: Intel Chipset Software Installation Utility, v.9.1.1.1019, A01 addresses? What fixed it? I ask his stated as critical.

  Detailed description

  Want to save time? You are not sure if you need this file?

  Run this easy to use Intel® Driver Update Utilityand it will be 'automatically' you tell if you need to update your chipset INF file and if so, will prompt you to install and you're done. This will save you a lot of time not only on your chipset download but the most common files needed for your system.

  Name changes:
  Intel® Chipset Device Software is the new name of the Intel® Chipset Software Installation Utility; We will see this name when you run the installation package.

  About this file/download:
  Intel® Chipset Device Software installs of Windows INF files. An INF file is a text file that provides the operating system of the information on a piece of hardware on the system. In the case of the current Intel Chipset Device Software, this information is primarily the name of the product for the piece of hardware. This allows the operating system to show the correct name for this piece of hardware in Device Manager.

  * Important *.
  Intel Chipset Device Software installs not AGP or USB drivers. DO NOT DOWNLOAD THIS UTILITY IF THE MANUFACTURER OF YOUR DEVICE TO CORRECT A "PILOT AGP," RECOMMENDS "AGP GART" OR "USB DRIVER" ISSUE; IT WILL NOT FIX YOUR PROBLEM.

  Please read the attached files before installing (Readme.txt and ReleaseNotes_9.4.0.1017.htm)

  Key words: 82801, ICH, health child and maternal

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• Parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the faulitng module error

  original title: problem with shdocvw.dll

  Hey guys just a quick question.

  bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.

  a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.

  Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure

  It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?

  see you soon

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link below to ask your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope that helps!

• Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

  netBT.sys replacement files viruses

  Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

  Thanks in advance

  Hi DonMendigo,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  I hope this helps.

• Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

  My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

  Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

  Now my question is that

  one) can I reload Windows 7 Home basic as I have the product key?

  (b) I can then download Windows 10 according to the normal procedure?

  I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

  Concerning

  S Subramanian

  Original title: Windows 7 Home basic

  You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• Software installation CD, recognizes not hard drive not labeled C:\

  My hard drive is called I:\.  The installation cd has not recognized this and will not install the software.  How can I get the installation program to recognize the hard drive?

  In my view, that it is a limitation of the software installer. We have downloadable versions, but to the best of my memory, even they do not give a location prompt.

  Message relates to: None

• Installation Partition problem (allocated too expensive for the Service Console?)

  Installation Partition problem (allocated too expensive for the Service Console?)

  RAID1 (15K 146 GB SAS) on Dell R710 and VMFS is on table EQL.

  What I did during the ESX4.1 excavation, it's that I have used ALL the space in 146 GB (mainly for / and / var), after adding this ESX host to vCenter, VC and EQL ASM/VE started to complain about the following points:

  1 VC: health check of localstorage warning (only has 245 MB left on 146SAS localstorage)

  2 EQL ASM/VE: warning rootFolder folder (due to the above)

  I thought that he is authorized to use all the space for / (50 GB) and / var (50 GB) in my case for only 146 GB, I don't think I need to leave any space on the installation disc.

  Could someone share some lights here?

  Thank you

  As you can see SDS use all the SDC VMFS partition space.

  This create the alarm.

  The thing really confused me why I have to leave a space on the disk at all?

  Technically there is no reason to let the space... but also no reason to have a big service console

  Usually, you need 10 to 20% free space for each snapshot data store and Exchange files... but in your case, you will not have these files.

  If you have any problems, but you receive the alarm until you do not disable them on this specific data store.

  PS: I suggest you switch to ESXi, is quite simple and it doesn't have this strange vmdk for the "console".

  André

• Satellite P100 - problem during a restart after a software installation

  Hello

  I met a problem when I restart after the installation of software. Stay black screen and windows XP does not restart. The first solution is to wait a few minutes and then I can restart normally.

  Could you please give me a reason and a solution to restart paques1861 after installation?

  Thank you very much.

  Hello

  I'm afraid I n t m understand your problem
  What the installation of the software do you mean?

  Did you use a Toshiba restore CD?
  Please explain your problem a bit more

• ScanJet software installs in German rather than English - a Windows 7 problem

  I am trying to install HP Scanjet full feature and Driver for Windows 7 (32 bit) for my ScanJet G4010.

  On the software download page I choose English (American) and then downloaded setup_full_G4010_14 - 5.exe.

  My Windows 7 is in English.  EN is shown it is stated in the taskbar.  And to be sure, I went to the United States as my current location.  However setup_full_G4010_14 - 5.exe launched in German.  It offered no language option during installation.  The clean install HP G4010-is in German and offers no language option.

  How can this be?  Well, I'm in Germany.  I don't see how the installer or the installed software could not understand that I am in Germany, but the HP site could.  Has made the website to slip me a German version of setup_full_G4010_14 - 5.exe despite my choice of a version to English?

  A small experiment proved that my system Windows 7, not the site of HP, is the source of trouble.  I ran the downloaded file setup_full_G4010_14 - 5.exe even on a Windows XP system and the installation program launched in English.  The Windows 7 software and then installed on the Windows XP system, in English.

  This shows that the setup_full_G4010_14 - 5.exe is multilingual, and my problem is that it incorrectly detects my Windows 7 as German.  The software installed is not multilingual.  I checked this glancing in an installed help file .xml in the Windows 7 install.  It's in German.

  How can I get setup_full_G4010_14 - 5.exe HP to think that my Windows 7 is in English?

  Hello

  Open the Control Panel, then go to the language and region.

  On the Format tab, make sure that your PC is set to English.

  Then, open the administration tab and verify that the local system is set up in English and not German.

  Now restart your PC, open the HP software and check any change.

  Please let me know if this is useful,

  Shlomi

• With my new Canon's MG7120 software installation problem

  I recently updated my homeoffice with a new Dell XPS running Windows 8.1.

  Bought a new Canon Pixma MG7120 to replace my old Epson printer.

  I tried to install the printer software from the disc that came with the printer.

  Ive been trying to connect wirelessly and my wireless router connects with my printer.

  My problem is when I run the disc.  When I get to the part of the installation, nothing happens.  All I get is a window telling me that "my firewall may try to block the installation of Canon and I should respond accordingly as" Yes, accept,... and no matter what the choice, I give myself to allow Cannon installation.:

  There is a button 'Next' at the bottom right corner and it will highlight when I place my cursur on that.  I clicked and nothing happens.  The installation should take between 5-10 minutes.

  Appreciate any comment or idea about it.

  Thank you

  CSantos

  

  I'm so disappointed.  I bought a brand new Pixma MG7120 for my grass hobby photograhy.  Finally, my old Epson Stylus photo passed his end of life phase where it is no longer supported.

  I have a new PC with os Windows 8.1.

  I was so excited, winning this new printer.  I followed the instructions to the letter and bam, phase of the Installation stalls.  The screen is just sitting there doing nothing.  I tried again to recharge etc... with the same results.

  I'm not a computer programmer and am really frustrated and angry that I have to go through this bs... and still not get the printer running.

  I went in the Drivers Canon section and set to date.  Still nothing.  I tried downloading online and still nothing.  Always the same stall during the installation phase.  Just can't get past that.

  What is going on?  I spent $250.00 on printers and ink and even impossible to print a letter.

  I have tried wireless and usb and a big '' NOTHING. ''

  I ask the support over the weekend and if I'm still able to print, I'LL RETURN the UNIT AND FIND ANOTHER BRAND THAT WORKS.