When doing upgrade of hardware models?

Similar Questions

• What happens when I upgrade my hardware?

  I will be upgrading motherboard, RAM, graphics card and hard drive of my PC. What I have to do to ensure that my copy of Windows 7 will work when I go to install new hard disk with all of the new hardware? I bought my copy of Windows 7 at BestBuy, this isn't a license to system builders.

  The EULA (EULA) for a copy of Windows 7 purchased "in a store packaged as software for end users," which is what you seem to be saying that you have, provides:

  17. TRANSFER TO ANOTHER COMPUTER.
  a. software other than Windows Anytime Upgrade. You may transfer the software and install it on another computer for your use. This computer becomes the licensed computer. You are unable to share this license between computers.
  b. Windows Anytime Upgrade software. You may transfer the software and install it on another computer, but only if the terms of the software license you upgraded allows you to do. This computer becomes the licensed computer. You are unable to share this license between computers.

  http://www.Microsoft.com/en-us/legal/intellectualproperty/UseTerms/default.aspx

  As a general rule, Microsoft seems to assimilate a new motherboard with a new computer, so by the time where you have made all your suggested improvements, you will have a "new computer". If I understand the above paragraph, you are allowed to install your copy of the retail of Windows 7 on this computer again.  You may use the telephone option to activate, however.  Stay online without pressing any key and will respond to a live person.  Explain your situation.

• Win98SE invited in WS v10.0.1; cannot upgrade virtual hardware

  I installed VMware WS v9.x v10.0.1 and, as with all the previous WS upgrades, I upgraded the virtual hardware to version 10.  With one exception, all that is.  My Win98SE guest does not accept the upgrade of virtual equipment of v9 to v10.  I have an error message: "this virtual machine does not have the latest version of VMWare Tools.  You must update the VMware Tools until you can upgrade the virtual machine.  "For more information about upgrading, see 'http://vmware.com/info?id=98'.  I am running WS on a Win8.1 Pro host.

  First of all, I did never had upgrade level of VMware Tools before upgrading the hardware.  I always updated the virtual material THEN upgraded VMware Tools.  In fact, I just did it for my Windows XP and Ubuntu Linux VMs, Win7.

  Secondly, it seems to be there anyway no new version of VMware Tools for Win98SE.  When I start the operating system, I get no automatic indication I had to upgrade.  When I go to the VM option in WS while the VM is running I only get the option "Reinstall VMware Tools".  And when I set the winPre2k.iso on the virtual CD and start the installation manually I get only the options to repair/uninstall/reinstall.  Relocation of the VMware Tools has the same original problem.

  I remember something vaguely similar in the past where VMware has released an upgrade which was problematic because they did not provide a new VMware Tools for Windows Pre2k operating systems and has not bothered to even update the version number in the file winPre2k.iso so that it works correctly with the new virtual hardware.  I'm guessing that something like this can happen again.  Either that or there is some kind of a bug.  I am remiss to contact VMware directly to report a bug through their support mechanisms; the last time I did it turned into a long 6 + months fiasco loaded many emails back to California and the India Conference calls, allowing the remote control of my computer, etc.

  When I tried to create a new VM Win98SE, WS chose the 10 hardware version that tells me Win98SE is supposed to work on this latest version of virtual equipment.

  So, let's recap: WS v10.x wants the latest tools installed in Win98SE VM prompt to update the virtual hardware to v10 but do not accept that there is NO new version of tools.  I have marked this message as a question in case someone can offer opportunities to a solution which I missed.  It's maddening to constantly through problems like this in a piece of software as professional and expensive.

  Sorry you have a question however...

  : 1 Windows 98 is more a BONE officially supported by VMware for VMware Workstation 10 (or Microsoft for that matter) even if it can be selected in the wizard.

  Fact 2: A given virtual hardware version can be selected does not mean all the features will be compatible with all operating systems or any OS.

  Fact 3: Products VMware, like many other manufactured goods, have questions that will have to be workaround at certain times.

  Then...  If it appears there is a question of trying to change the hardware compatibility through the user interface and then manually edit the .vmx config file to make the changes necessary and appropriate!

  If I were to create a Windows 98 VM by selecting "hardware compatibility:" Workstation 9.0 and 10.0 Workstation, while accepting all the default values, the only difference in the .vmx config file is virtualHW.version = '9' vs virtualHW.version = "10".  If a simple manual modification of the .vmx config file it will modernize to 10!

• How to cancel the upgrade virtual hardware task?

  Hi guys,.

  Right now, we have a problem.

  Last week, we try to migrate a computer virtual from one server to another.

  We forget to type hard when you copy the files.

  vmkfstools-i /vmfs/volumes/4e7cbe71-9b013d2d-b735-001e67059c6c/EVSamsClub/EVSamsClubServer/FedoraTest.vmdk/vmfs/volumes/4e7cbe71-9b013d2d-b735-001e67059c6c/EVSamsClub d thin

  The correct is

  vmkfstools-i /vmfs/volumes/4e7cbe71-9b013d2d-b735-001e67059c6c/EVSamsClub/EVSamsClubServer/FedoraTest.vmdk/vmfs/volumes/4e7cbe71-9b013d2d-b735-001e67059c6c/EVSamsClub. VMDK thin d

  Then, we get an error message.

  http://screencast.com/t/kf5vSY4A2R3

  And then we hit the virtual hardware to update. Now a week past and the VM still under upgrade virtual hardware.

  It cannot be cancel and we can not delete the virtual machine.

  See here:

  http://screencast.com/t/76nDz2CpLWXe

  Right now, we want to just cancel the upgrade process and delete the virtual machine.

  Any suggestion?

  Who is King

  Zigange

  Hard shut down the virtual using the vSphere client. If it does not migrate all other virtual machines off the coast of the host, then turn off the host. When you restart the host, you should be able to remove the virtual machine as the processes that are running against her will have stopped.

  Kind regards

  Paul

• HP ProBook 440 G2, fingerprint reader works not when I upgraded the Win 7 Pro form to win 8.1 Pro

  My HP ProBook 440 G2, finger print reader does not when I upgraded the Win 7 Pro form to win 8.1 Pro.

  Device manager showing the biometric reader works correctly. But in fact, the finger printer reader is not reading or senseing. It seems that the part "dummy". Please help me to correctly configure step by step for that matter.

  Thank you

  Hillet

  Have you installed the software driver validity sensor fingerprint for Windows 8.1?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943811 & swItemId = ob_134806_1 & swEnvOid = 4158

  See page 64 in the manual Windows 8.1 according to the configuration of fingerprints of validity information

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=6943810 & docid = emr_na-c04371762 & docLocale = en_US

• My lbp6000 has stopped working when I upgraded to osx 9 mavericks. How can I get it back?

  My lbp6000 has stopped working when I upgraded to osx 9 mavericks.  How can I get it back?

  Hi gkharris!

  I know that this issue is frustrating.  I'll be happy to help you.

  When upgrading to new operating systems, we recommend that you uninstall and reinstall the drivers.  Please uninstall the printer by following the instructions in the article:

  Uninstalling the printer driver (CAPT V3.55)

  After uninstalling the driver, please download the latest driver on the Canon USA site.  Please click the link below:

  http://USA.Canon.com/Cusa/support/consumer

  Once you are on the site, enter your model number.  Your operating system will be detected automatically.  Click on the word 'Pilot', and then select The CAPT Printer Driver Ver.3.65 and save the file. Then, open it from the save location and install the driver package.

  Finally, save the printer in the print queue by following the instructions in the following article:

  Registration of the printer with USB (Mac OS X Lion) ( CAPT LBP Series Driver3.36)

  * Although it shows OS X Lion, the instructions are the same.

  I hope this information is useful for you.  If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• How to install and activate Windows XP after the upgradation of hardware

  I am using Windows XP SP3 and it is activated. I have the original and authentic installation CD
  with the product key in my possession. I plan to upgrade my hardware by replacing the HARD drive, motherboard, CPU.
  RAM and DVD player. Please inform how to install and activate the Windows XP to the new
  material configuartion. At the present time, I have no intention to migrate to the Windows 7 operating system.

  If you use OEM copy of windows XP, you will not be able to reactivate.  When you change the motherboard, you need a new license.

• Re-install Windows after upgradation of hardware

  I have a PC with dual boot system with Windows 7 Home Basic and Windows 8 Pro, which are legal and active versions. At the present time, the PC is running on an AMD Athlon X 2 processor.  This processor does not support some important features of Windows 8, I need. I tried to upgrade the hardware and installed a new card mother with Core i3 processor and re-installed both windows. I find that Windows 7 and Windows 8 lost their start-up and cannot be activated with original product keys. The message I get is "significant physical changes have been detected...". ». So, I was forced to go back to the old AMD processor to maintain activation intact, which prevents me from using the important features. Please tell me how I can upgrade my hardware and also keep the activation of two intact windows.

  Assuming that Win7 Home Basic has been provided by your PC manufacturer's OEM version and as such cannot be transferred/enabled on new hardware as its related to the original hardware (motherboard)

  For Win8, as others have said you activate by phone

• How to upgrade the hardware on a VCenter Server

  In lab environment, two hosts, VCenter server, don't HA, storage etc. running share. I managed to upgrade hosts, using Crossover, but his declaration of errors when attempting to upgrade the hardware of server VCenter comments... I can see that it would be a problem, using VCenter to upgrade equipment on himself, when he needs to reboot the server to install. The question is, how to get around that? I tried to look for solutions, not found anything yet. Hope that makes sense.

  Latest versions of everything, as it is a laboratory under eval licenses. Thank you

  You must turn off the VM, connection to the ESXi host through vSphere client vCenter and right-click on the VM vCenter > virtual hardware upgrade.

  Make sure that you run VMware tools before do you.

• Workstation 8-Upgrade VM hardware compatibility?

  Salvation;

  I was wondering what the "normal" procedure, when you upgrade the workstation 7 to 8. It is expected that you would normally hold the VM "hardware compatibility at the old level 6-7', or it is expected that you would usually improve the old VM to version 8?" (At least presuming you don't have all the questions where you need to maintain compatibility with other VMware products...).

  I imagine that in both cases you normally install tools version 8. I have Windows 7, Windows XP and Linux Guests.

  Thank you;

  -Greg

  the usual procedure was: download the new version and upgrade virtual hardware to the new

  However with WS 8 I wouldn't only light heart
  you don't even know if it works for you - if I would not upgrade any virtual computer within weeks
  is better to wait until you know that WS 8 works as well as WS 7 on your host - you will not be the first to return to 7 WS

  anyway - as always with risky installs as Windows updated or changes in vmware-tools... take a first snapshot

• With Acrobat 9 and XI installed, is the version of Acrobat 9 still not allowed when the upgrade to XI?

  I have an Acrobat 9 Pro Extended and Acrobat XI now in the first instance.  I want to keep both versions installed for development reasons.

  If I activate Acrobat XI with a upgrade key will be my still authorized Acrobat 9?

  When you upgrade to AAXI, you technically replace AA9. Probably not a problem as long as they are both installed on the same machine and don't serve does not extend additional slots beyond the license. However, why have both?

• When I upgraded my Adobe Flash Player, my past Google Yahoo search engine.  I can't switch back.

  When I upgraded my Adobe Flash Player, my past Google Yahoo search engine.  I can't switch back.

  1. Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  2 safari > Preferences > Search > search engine:

  Select your preferred search engine

  3. visit the site of your choice that it be the homepage

  Safari > Preferences > general > home page

  Click on the button "set to the current Page.

  4. use Malwarebytes Anti-Malware for Mac to remove adware.

  https://www.Malwarebytes.org/antimalware/Mac/

  Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.

  Once this is done, exit Malwarebytes Anti-Malware.

• Mine is Yahoo where POP is used. Tuberculosis is IMAP. I can receive and send emails, but when doing action on tuberculosis (Del or send) any reflection on the primary server

  Hello
  My e-mail address is Yahoo and Yahoo by default user POPs.
  I understood from your help file synchronization is only compatible with the IMAP e-mail provider
  I can receive and send emails from TB, but during action on tuberculosis (Del or send) any reflection on the primary server, even when doing the action on the main server (Del or send), no change on tuberculosis

  help from yahoo I managed to find the Setup for IMAP, but could not apply them on TB, TB already have Yahoo as POP in the configuration list
  Please your help on this

  Best regards
  Mohamad

  You cannot convert an existing account, but you can set up your Yahoo as IMAP account in parallel to the existing POP account. See
  http://KB.mozillazine.org/Convert_a_POP_account_to_a_IMAP_account

• Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please

  Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• iPhone 6s does not 'AirPlay' 07 model Apple TV, why?

  iPhone 6s does not 'AirPlay' 07 model Apple TV? Why?

  PS Both connected to the same network

  Apple TV 1 models did not support Airplay.

  How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support