When I install one of the animated appearance Add-ons when I close the browser and reopen again he won't move anymore. Help please.

Similar Questions

• Everyone is having a problem with only being able to do a Google search and then nothing after that. I have to close the browser and reopen it to each search

  Since the upgrade to 12.0, I am only able to do a Google search. After the initial search, nothing happens when you try to make another. I have to close the browser and reopen it to each search. Any ideas.

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Accidentally, I saved a PDF file in the cloud and can't be deleted from there. Help, please. I've upgraded to Adobe Acrobat Reader DC and it does not allow me to save the scans on my computer.

  Accidentally, I saved a PDF file in the cloud and can't be deleted from there. Help, please. I've upgraded to Adobe Acrobat Reader DC and it does not allow me to save the scans on my computer.

  Or simply open CD player

  Go to the Home tab then Document Cloud

  Click on the PDF file to be removed

  Click on remove in the top

• My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

  My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

  Hi Joshua,.

  I think you found the turning wheel on the Adobe CC application.

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  You can also view the nets below where this issue has been addressed:

  Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

  Creative Cloud Desktop App taped blue spinning wheel after update.

  Kind regards

  Sheena

• We have no admin on Windows 7 users. They change the homepage and it works for this session. When they close the browser and restart again the default home page is displayed.

  Windows 7 Sp3. using Firefox 7.01
  Non admin users.
  Home page change to what they want and it can work.
  BUT when they close firefox and open it again the home page goes back to the default setting

  You have a (security) installed software that can restore files when starting?

  See:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.com/kb/preferences+are+not+saved

• Hi, I just buy photoshop pays every month, but I can't install it. He always tells me to connect to the internet and try again... Can anyone help, thanks

  I can not install/download photoshop continues to say m to connect to internet, and then try again

  Hi Kelly,

  Have you downloaded the desktop creative cloud application?

  Here is a page with a link to download (top-right), as well as the explanation of how it can be used.

  Kind regards

  Steve

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ho I convert my catalog of items 5 to 13 items that I just bought.  I took one of the tutorials and I converted my catalog of 5 elements in a file 'pse.13db '.  How can I get 13 elements to recognize this converted file?  When I open it Ca 13 items

  Ho I convert my catalog of items 5 to 13 items that I just bought.  I took one of the tutorials and I converted my catalog of 5 elements in a file 'pse.13db '.  How can I get 13 elements to recognize this converted file?  When I open elements 13 Catalog Manager and navigate to the correct location, it does not show the file.  Help!  Thank you

  Hi bumps and Spooley,.

  Would it be possible for us to have a look at the file catalog.pse13db from your machine?

  If the file size is not too large, please feel free to send me by email @ [email protected]. If it is too big, I'll share with you a Dropbox folder where you can download the same.

  Thank you

  Catherine

• I select save files, but when I close the browser and open it again, he was always ask me where to save files.

  I select save files, but when I close the browser and open it again, he was always ask me where to save files. Whenever I closed and re-opened my browser it goes back to ask me where to save files.
  Help, please

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

  If you like Advanced SystemCare software that could restore some files from older versions to protect files against the changes and then check their settings or uninstall this software.

• Error: "the drive where windows is installed is locked, unlock the drive and try again" while trying to regenerate the system

  My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.

  I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.

  I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".

  I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.

  I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.

  Don't know what I can do. Can you help us?

  Original title: Toshiba S955-S5373 will not start

  Hi Annaed,

  Thanks for posting your query in Microsoft Community.

  I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.

  Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.

  This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.

  As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.

  Windows crash hard drive - discount - locked, unlock the hard drive

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Creative cloud packer "Please connect to the Internet and try again" when on MACOSX Netowork account

  Hello

  I'm having the following problem. We are running a Mac OS x environment on a server open directory (Lion Server). For some reason when I try to use Creative Cloud Packager under a network account I get the error "Please connect to the Internet and try again. The account has local administrator rights in the machine.

  When I log in as a local not network connection account, everything works fine.

  There is no configuration of firewall on network accounts rules, all ports are open.

  Please can someone help. We use administrator accounts network for the administration of the network.

  Concerning

  Hello Fom,

  Site/Port information used by creative teams and Creative Cloud cloud for businesses

  These host/port combinations need to be on a whitelist when connecting with one ID Adobe to download, install and activate licenses for applications via a creative cloud subscription.

  • ccmdls.Adobe.com:443
  • IMS - na1.adobelogin.com:443
  • na1r.Services.Adobe.com:443
  • prod-rel-ffc - ccm.oobesaas.adobe.com:443
  • LM.licenses.adobe.com:443
  • ccmdl.Adobe.com:80
  • swupmf.Adobe.com:80
  • swupdl.Adobe.com:80

  For more information, please see the mentioned link: http://helpx.adobe.com/creative-cloud/packager/creative-cloud-packager.html

  See you soon.

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• When I try to play a game! all I get is "a debugger has been detected _ unload the debugger and try again.

  I did evry thing I can think and what's on the net
  CAN ANY 1 CAN HELP ME!

  Hi buddy300,
  Welcome to Microsoft windows vista forums!

  a. this happens only with games?

  b. remember that any changes made to your computer before this problem?
  Have c. you installed a software debugger on the computer?

  This problem may occur if one or more of the following conditions are met:

  ·         There are programs (for example, an antivirus program or debugging software) that run in the background and that interfere with the game startup process.

  ·          Your sound card or sound card drivers are outdated.

  ·         His Creative Audigy card is installed on your computer. This sound card may conflict with the game startup process.

  I suggest you do the following:

  Step 1: disable the security software on the system tray and then check.

  (Note: enable security software after the test)

  Step 2:

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  Step 3: try the steps mentioned in the article

  Games: Error Message: a debugger has been detected: unload the debugger and try again

  http://support.Microsoft.com/kb/812759

  Step 4: System Restore: -to restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose another restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem and then click Next.

  d. click Finish.

  e. the computer restarts and system files and settings are back to the State they were in at the time where the restore point has been created.

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install settlers 3 gold edition. I get a message "the settlers edition Gold 3 CD not found.» Please insert the CD and try again. »

  Original title: settlers 3 troubleshooting

  I had the settlers 3 gold edition installed on windows 7 Home premium 32-bit. After having extracted the files now, I try to run the game by autorun icon, a new window opens with options 'install new/edit' and a few others, but everything by clicking on one of the icons I get the same error of "settlers edition Gold 3 cd not found.» Please insert the cd and try again. »
  Please guide me how to solve the problem if you have any solution for this.

  Thank you

  Hi Bulech,

  Settlers 3 gold edition is not listed in the Windows 7 Compatibility Web site. It may or may not be compatible. Take a look. Clickhere .

  However, you can follow these steps and check if it helps to solve the problem for you.

  Step 1:

  I suggest, instead of just click on icons, you right click on the .exe file and run as administrator.

  Step 2:

  If it is little help, you can run settlers 3 gold edition in Windows Vista compatibility mode .

  Step 3:

  Alternatively, you can run the game in compatibility problems solving

  To run the troubleshooting program compatibility Troubleshooter

  a. open the resolution of the problems of compatibility of programs by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  b. follow the directions contained in the resolution of the problems.

  Aziz Nadeem - Microsoft

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]