Neither one of my superspeed USB ports have already worked

Similar Questions

• USB port have stopped working

  Original title: windowsz 64-bit acer aspire 5332 usb ports no longer working?

  My usb key, used to work now that they just stopped? IV tried everything to remove all the drivers and install again and also have rebooted my laptop, if someone can help I would be very grateful! : o).

  Hello

  
  For further assistance, you can contact Acer. Check out the following link.
  http://support.Acer.com/us/en/default.aspx

• USB ports have stopped working on the Satellite C

  Hello. Just turned on my laptop and found that the USB ports hafe has stopped working. No mouse and no external storage. Any ideas?

  What USB port status is visible in Device Manager?
  Are no yellow exclamation point visible?

  Expanded the USB hubs and region of controller and remove all the listed USB ports / controllers from the list of devices.
  After that, restart the device.

  The system should reboot and the USB ports should be recognized and installed automatically.

  Try this workaround short and report results.

• Satellite C650 15Z two USB ports have stopped working / load

  Hi can someone throw their professional opinion on a current problem I am experiencing with my

  Satellite C650 15Z
  Windows 7

  There are 2 USB ports which are now both inoperative - there seems to be no power from them (ipad/phones do not charge) and any flash drive I insert does not appear as a drive in my computer
  and I don't hear audible alerts or message pop ups after insertion. Like I don't know what I look in Device Manager, I thought that someone may be able to help here?
  Thanks in advance

  Hello

  In Device Manager, you can try to delete and remove the USB host controller and USB hubs.
  All these devices are responsible for the functionality of USB ports.
  After you remove the USB host controller and USB hubs, restart the laptop.
  Usually the Windows operating system should recognize the devices automatically deleted after that, you can check if the USB feature is back.

• USB ports have stopped working?

  Under Vista, get code 19 in device mgr.

  Hello

  Start at the top of the checklist I posted and do them all. If no joy, you need technical assistance.

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP Pro 3400 MT (usb ports do not work in windows 8.1 on Intel chipset)

  Are prorts USB on my computer do not work!
  I have Intel (E) 6 series C200 chipset. I'm updating all the drivers and after 5 to 15 minutes when the computer starts, usb ports have stopped working.
  My computer model: HP Pro 3400 MT
  OS: Windows 8.1
  Please, help me! How can I solve this problem?

  Yep! But... If this is not a new installation work? Hmm...

  Without doubt, I find a reason. It's for my X-710-BK (a4tech) mouse drivers. I switch to a different mouse and system now works fine!

  PS > not update drivers just because you can. Updated only if you wish.  -I agree!

• My USB Ports don't work, but they still have the power to impose measures.

  I have a Toshiba laptop (A205-S5859) and all 4 of my USB ports do not work.  I am running Vista Home Premium.  Sometimes they detect an 'unknown device', but it is not very useful.  They also always charge my blackberry.

  In my efforts to fix it, I have:

  * disabled/enabled all 4.

  * uninstalled/installed all 4

  * Made some USB ports are initialized in my BIOS

  * some thing I have updated BIOS updated

  What can I do else?  Help, please!  I'm desperate to be able to sync my new blackberry with my previous all my info is on my computer.  I also want to be able to sync my blackberry on my computer in the future...

  Hello

  Even if you did some of them previously please follow these steps in this order.

  --------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• How to check the usb ports have enough voltage

  Hello
  I have a dell vostro 3500
  I think my usb ports does not receive enough voltage, because sometimes my usb ports does not work and there is no software problem I checked it
  How could I check that?
  I test my system with hwmonitor, but can not understand anything
  It comes to hwmonitor report on my system
  http://20-up.IR/images/l6ffkm1a9s8xsnbjht.PNG

  Thank you

  Hi Hossein,

  Thank you for your response.

  Check out the following link.

  Code 43: Windows has stopped this device because it has reported problems.

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

  I hope this helps.

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L855 - 14 p - USB ports do not work after the mode 'sleep'

  Heya guys,

  I have a strange problem today. The 2 USB inputs on the right side of the laptop (idk who is 2.0 or 3.0) does not work with the reason I can not perceive. These 2 guys are on different days, but in the same way. A month ago, I plugged the mouse USB wireless to one of them, then entered mode 'sleep'. When I came back, I discovered the work of mouse aint.

  Then I realized the port I plugged the key USB has no electiricity inside no more. I found it very strange and continuous without using the port of broken, until yesterday. Yesterday, I made the same mistake (a la mode "sleep" in a USB port plugged into the other port - work-) and I have re-opened, the 2nd port is broken in the same way, too. I've mastered Manager devices, regedit, but it has no use. This lead me to think his could be a hardware problem, but how can be possible? Is this a coincidence?

  Now, I have to use my 3rd and last port on the right side of the laptop with a USB duplicator.
  You have any ideas? Can it be a software problem?

  Understand this correctly? The USB ports mentioned don t work even after restarting a new laptop?

  In this case, it could be really a hardware problem
  But before talking about hardware problems, I recommend to recover the laptop using Toshiba recovery.

  Defining the notebook back to factory settings will help you identify the problem: If the USB ports wouldn't work, this s hardware problem.

• Satellite A110-260 - USB ports do not work

  Hey!
  I have a Satilite A110-260 of my brother.
  The problem is that the USB Ports do not work :-(

  They go into the hardware Manager, but I can't install it.
  I have download the hardware installation of the Toshiba homepage but... :-(

  Can you help me?

  Sincerely of John

  PS Sorry for my English ^^

  Can you please tell us what OS are you trying to install?
  SP1 or SP2?

  Please after the installation of the OS, the first thing you need is install driver Chipset.
  Did you install the right one?

• USB ports do not work

  I just bought a G72t laptop August 23 and 2 or 3 USB ports not recognize not all devices. I have a wireless mouse plugged into the 3rd USB and it works fine. I tried to install a printer (HP 4280) and it would not work on one of the other 2 ports. It works on the port where the mouse works. The mouse does not work in ports 2 bad either. I went through the entired remove the stuff of USB controller without success. It seems so much like a hardware failure. Someone at - it a suggestions?

  Sounds like a bad connection on the motherboard or a bad mother, contact HP and get repaired under warranty, or return the phone to the place of purchase and ask for a full refund.

  Nothing worse than buying a new laptop which is broken right out of the box, I return it and get a refund or Exchange for another new laptop, the sooner the better.

• USB ports no longer work

  all usb ports no longer work and I tried to fix all the methods have failed and he tells me that all drivers are installed and work properly... not

  all my devices that worked in one of the 3 usb ports. I tried all methods on the 'help' with questions. I get a msg that says that all devices are up to date and working properly but it always starts as "computer does not recognize this device ' click here to solve. I can't solve

  Hello

  You did all the people?

  Try a Place Upgrade or repair Installation. If this does not work, you will need help of a
  real computer store (not the leeks and the glances at a BestBuy or other big box stores) or the system
  Support from the manufacturer.

  This tells you how to access the System Recovery Options and/or use of disks of Vista
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Or you could do a clean install.

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My USB ports do not work.

  Hello
  Yesterday, I bought a brand new printer, implemented, it was working fine, and then it just stopped. So I fought a bit with her, decided the printer was defective and would resume and put it out to a new, and meanwhile put my printing task on my jump drive and bring it to our local printing store. However, when I put my jumpdrive into the USB port to transfer the project, my computer would not my USB - stick. So now, I think that for some reason that my USB ports are not working. Why is this happening and how to fix it?

  Hello

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.