When I try tp print a box indicates no printer installed?

Similar Questions

• When I try to print a box pops up saying before printing select a printer and my printer says his work

  Ive always used my printer but now when I try to print something I get a box that appears saying before I can print to select a printer, I try but nothing happens and I always get the same message, the ideas of whats wrong?

  Hi susan4122003,

  1. you remember changes to the computer before the issue started?

  2. This only happens when you try to print from any particular application?

  I suggest you try the steps from the following links in the article and see if it helps:

  Printer in Windows problems

  Resources for the resolution of the printer in Windows XP problems

  I hope this helps.

• I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on

  I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on out of the box with this message, I get a different dialog box including the message says "it has not chosen to print pages".  Any suggestion would be appreciated.

  The way I got it to print has been:

  Without opening the program, in the list of applications, move on to Adobe Reader and right click, select Properties.

  Go to the compatibility and click 'run as Admin '.  Reopen the application and all prints for me now.

  (This can only work with your personal computer if?)

• When I try to print, the queue varies from 0 document (s) in the printer queue: error

  * Original title: printer: error

  Overview:

  I have a Dell 560 which has Windows 7 64 bit is installed.  My printer is an old HP Officejet v40xi.  Have had two e connected by a USB cable for 3 years.

  Location:

  I ran out of ink.  I had not been printing a lot, so I did not fill the cartridges for several weeks.  I had a bright idea to reinstall the printer software for the printing/tool box I used on another computer.  I wanted to do a scan.

  I deleted the software and tried to download the software again.  The disk could not be downloaded on Windows 7 64 bit.  So I got the software from the HP site.

  When I try to print, the queue varies from 0 document (s) in the printer queue: error.  I reloaded the software twice, I put on a new USB cable and I changed the port.  I still get the same message.  Troubleshhot Windows printer also, indicates that it cannot determine the problem.  I went to HP and did not find any help.

  Does anyone know how to solve the problem?

  Hello

  -What is the full error message?

  I suggest you link and check if that helps.

  Unable to print? Print jobs are stuck in the print queue

  For more information, see the link.

  Solve a problem

  If the problem persists, contact HP support for help.

  Let us know the results. We will be happy to help you.

• 28 Firefox crashes when I try to print to the printer, Acrobat PDF

  Hi all!

  I observed a problem when I try to print a Web page in Firefox v28 using the printer of PDF Acrobat (Acrobat Pro 9.5.5) installed on a Virtual Machine (VMware View 5.2) with Windows 7 64 bit. Print dialog box crashes (no response) after the pdf dialog box "Save as." Then I have to force Firefox to close, and subsequently an Acrobat PDF conversion dialog box appears with the progress bar has stopped in the middle. I must also close it afterwards.

  The other programs (Office, IE, Notepad...) are able to print through the PDF printer without problem. The problem appeared after the automatic update of Firefox v28, since when I downgrade to Firefox v26 the problem disappears.

  I checked a setup similar to a physical computer (W7 64 bit, Acrobat Pro 9.5.5, v28 of Firefox), and everything works fine, so I think it's a change that's happened in Firefox v28 who has a problem with the configuration of the VM. I also tried to change the Firefox profile, reset Firefox and reset the print settings and reinstall Acrobat. No luck.

  I would like to know if anyone knows some changes in Firefox v28 printing or related to any service or update that may have a problem in the virtual machine.

  Any help is welcome!

  Thank you!

  I just try with Firefox 29 in the same virtual machine, and it works perfectly, so I guess that is a bug in version 28.

• Firefox will not print on my HP PSC 750 printer and loses all formatting when you try to print to the printer Brother HL-5240

  I have no problem with one of my printers when printing 11.7 before or IE 6.0.2800.1106 but cannot print from Firefox 3.6.13 (or earlier).
  When you try to print to the HP PSC 750 inkjet printer, a "Print" dialog box appears, showing the title: xyz and a progress meter showing 100%, but it's be covered almost immediately by a second dialog box stating "an unknown error has occurred while printing" and, even if the continuous printer saying 'impression', no printing is taking place.

  When you try to print to the Brother HL-5240 laser printer, printing will take place, but all formatting is lost and what comes out is a block of text unintelligible running.

  What can / should I do to get Firefox to print correctly on my two printers?

  1. print.print_printer reappears after printing something. This pref is the last printer used, so when you reset the prefs it does not appear until you print something.

  2. that your problem with printer HP reappeared quickly, try a new profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

  3. with regard to the preferences for the old printers, if reset you these Pref they don't come back (assuming that you do not select accidentally printers or printer drivers are uninstalled).

• OfficeJet Pro 6835: Receiving user Intervention required status, when I try to print something

  I just installed my new printer to two computers, works perfectly on my Toshiba laptop running windows 7. However, when you try to print from my Dell windows 8.1 laptop I keep receiver a message saying "required user Intervention." I tried uninstalliing everything and put it back, once again. Otherwise, I don't know what to do.

  Hi @JonnyHman

  In my view, that it is a spooler error. Please, perform the following steps and let me know if that solves the problem;

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the Run dialog box

  • Type services.msc and press enter
  • Locate the print spooler and double-click it to open the spooler properties
  • Make sure you that Startup type is set to automatic, if not please click the menu down and select automatic
  • Under Service status, please stop the server, wait a moment, and then click Start

  If the problem persists, please run printing HP and Scan Doctor; Click here to download and run the print and Scan Doctor > www.hp.com/go/tools.

  I can't wait to hear back on your part.

  

• Picture Manager window opens when I try to print.

  * - Original title - Manager pictures

  I have to print an Adobe download sheets and when I try to print, it reminds me of Picture Manager which I don't want, and then a sign of Adobe in the middle of the window, and I now have the idea where to go from there.  I have not need Picture Manager, so please how to remove it.

  Hello

  What version of windows is installed on your computer?

  Follow these steps to disable the Photo Manager.

  1 - click on the Windows "Start" button and select "Control Panel".

  2 - double click on the icon "Add / Remove Programs" If you are using Windows XP. If you use Windows Vista or Windows 7, click the "Uninstall a program" instead.

  3. Select the entry "Microsoft Office" and then click on the "Edit" button if you are using Windows XP. If you use Windows Vista or Windows 7, right click on "Microsoft Office" item and select "change".

  4 - Select "Add or remove features", then click on 'Next' or 'continue '. If you are using Office 2003, you must also check the box on the next screen titled 'Choose advanced customization of applications', then click 'next '.

  5 - double click on the item of "Office Tools".

  6 - click on the drop-down next to the article "Microsoft Office Picture Manager" menu and select "not available".

  7 - click on 'Update' If you use Office 2003. If you are using Office 2007 or later, click on "continue".

  8 - click on 'Close' once the uninstall is complete and restart the computer.

  If you still need help with Picture Manager, then post your question in the Forums of office from Microsoft here: http://answers.microsoft.com/en-us/office/forum

  I hope this helps.

• I get "printer does not ' when I try to print via WiFi. Everything seems to be set up properly

  I went through setting up to print via WiFi.  When I try to print I get printer not responding do not.  When I boot I have a message "the printer is online."  I get a box showing that I am low on ink.  I can use the features of scanning from my laptop.  I can't print.

  I have a printer Canon MX882

  Lloyd

  Hi Lloyd,

  Thanks for posting this question in the Microsoft Community.

  To provide a proper resolution, I would need more information on your side.

  1. what operating system is installed?

  2. what security software is installed?

  3. don't you make changes to the computer before this problem?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  We can refer to this article and check if that helps.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• my computer says printer ready, but when I try to print it does not say connectedit is a HP 3000 3 month old.

  I have a wireless printer. On the computer it says ready, but when I try to print it says not connected. Help

  Print a Network Setup page using the controls on the front panel of the printer.  See your manual for details.  Some newer HP printers have very summary User Guides (if you have the Deskjet 3000 J310, this means you) and it is difficult to see how - or if - you can print a Network Setup page.

  What you want to do is (a) determine the IP address that is currently configured in the printer and potentially re - configure an IP address of your choice.  You may need to search in the help for the printer on your computer system.  You may be able to access the printer setup utility using your Internet browser or you need maybe connect you the printer to the computer via USB and use the printer installation CD.

  Once you know what the IP address of the printer (and, preferably, how to change), then...

  On your computer.

  • Click Start > printers and faxes
  • Right click on your printer icon, and then select Properties
  • Click on the Ports tab
  • Taking care NOT to click in the list of ports (where you might accidentally change something), click Configure Port
  • Compare the IP address in the box "printer name or IP address.
  • If the IP in the box is not the same as the one you have determined for the printer, make sure.
  • OK your way out and you should be able to print.

  Now... If the above has solved your problem, you might want to know why and probably would like to know how to prevent it from happening again.  Him 'why' is normally your wireless router automatically sets the IP address of the printer.  If you turn the printer off, there is no guarantee that the router will assign the same IP address when you turn back on it, especially if the other devices were connected to your router in the meantime.  There are two methods to deal with this.

  One, you can check the checkbox in the tab "Configure Ports" which always says 'print to this device, even if its IP address changes.'  This is a feature that the HP printer drivers have, but in my experience, it is not reliable.  It works probably better if you change the contents of the box of the IP address of the printer "hostname."  This is something that you should be able to find in the printer setup utility accessed through your web browser.  It is NOT the name of 'Port' that appears on the "Port Configuration" tab in the area above the IP address.

  Two, you can change the way that the printer receives his usual default IP (automatic) address manual, otherwise known as a static IP address.  If you do this, you will need to choose an IP address that is in the same subnet as your router (this means that the first 3 of the 4 series of numbers of the IP address must be the same).  For example, if the IP address assigned to your printer is 192.168.1.105, then any IP address that you select for use as a static IP address for this printer must begin with 192.168.1.  The last part may be any number of through254 2, EXCEPT that it may not be a number this router can assign to something else.  You will find this bit of your router configuration utility.  Or, if your printer was awarded automatically an address with the last part as 100, 101, 102, 103, etc, you'll be pretty reliable if you choose a number far away, but still within the range (for example, 25, 50, 200).

• C4580 on Macbook. Print the test and scans wireless but said network host is busy when you try to print.

  I installed everything and print a wireless test page. That works, scanning the wireless work. I can see print ink wireless levels but when I try to print the screen I get

  Host "xxx.xxx.x.xxx" network is busy. retrying in 30 seconds...

  But she does not ever print. I think it's just a matter of minor adjustment that anyone has any ideas?

  The test page does not use the computer (uggh) queue service, so often works with the spooler is hung up.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, you will need to tell me which version of Mac OS X you are using and where you got the HP software.

• When you try to print the document his service hence giving error does not

  I am using windows xp pro sp2

  When you try to print the document his service hence giving error does not

  then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

  Please help me

  Hi kalpesh_vaghela,

  1. Did you the latest changes on the computer?
  2. What is the full error message that you receive?
  3. What is the number and model of the printer?
  4. You use any program to print the document?
  5. Are you experiencing a similar problem with any program that allows you to print?
  6. You have security software installed on the computer?

  Method 1

  See the link below and try the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.

• When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

  How to fix error code 105-100003

  I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

  Hi, Jimmy.

  Make the printer and model would be useful.  Thank you.

  Try the following:

  If your printer is connected via a wireless network:

  1. Make sure that your printer is turned on. (Start button / stop is turned on).
  2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
     • If the blue wireless LED flashes, your printer is not connected to your router.
     • 1. Follow the steps in the configuration of wireless network Guide (named the network installation Guide, if your printer has Ethernet printer capabilities) to connect your printer to your router.
       2. If you are unable to connect the printer to the router:
          1. Turn off the power to the router, and then turn on the router
          2. Follow the steps described in the [wireless] Network Installation Guide once again.
          3. If necessary, see what should I do if I can't configure my all-in-one printer (including the connection of wireless configuration)?
  3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
     • If the error ' printer does not "occurred while you have been setting up the printer:
     • 1. Open Software Center.
       2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
       3. Follow the on-screen instructions to set up the printer.
       4. Try to use the printer again.
     • If the error occurred after you completed the roll-out of your printer from Home Center Software:
     • 1. Make sure that the print queue is online.
       2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
       3. Click on your printer.
       4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
       5. Try to use the printer again.

  If the error persists:

  1. Remove the printer from your computer.
     1. Select start > settings > printers and faxes.
     2. Right click on your printer, then click on remove.
  2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
     1. Select start > Control Panel.
     2. Double-click user accounts.
     3. Click turn user account control on or turn it off.
     4. Select the check box use user account control.
     5. Click OK.
  3. Configure the printer again.
     1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  4. Try to use the printer again.

  If the error persists:

  1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select Disable.
     5. Click OK.
     6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
  2. If you configure your printer, run the KODAK printer setup utility.
     1. Select start > programs > Kodak > KODAK Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  3. Select the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select automatic.
     5. Click OK.
  4. Try printing from the center of renovation again.

  If the error persists:

  1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.
  
  NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
• Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
• Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.

NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

If the error persists, contact us.

http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

• Office pro 8600 Jet option only fax when I try to print

  When you try to print a document from my file command in the taskbar, my printer appears in the box... when I click on 'ok '. I get a page that says "fax". With no option to print. I use windows 7 Professional. I can print wireless from my ipad with no problems. I'm puzzled! It worked fine before, so I wonder if a framework could have been changed.

  Have you tried to uninstall and then reinstall the 8600?

• Fax window appears when I try to print photos

  Printer: C410a, running Windows 7.

  Been trying for weeks to fix this very frustrating. Printer works fine for normal printing. Problem when you try to print photos, whether they come from photo file or memory card. I get the photo all together to the top, but when I hit the key "printing" on the screen of the fax arrives. I've never used the fax and is not connected to a phone. Have tried everything I can think of, including the uninstall of the printer and put it back, using the installation cd. I'd appreciate any ideas on how to correct the problem.

  Hi reljzyHarperJ,

  When the printer is installed, a standard printer and a fax printer are both installed.  In many programs, there is a quick print button and a standard print button.  If you use the standard print button, a print dialog box opens and you can choose the printer.  If you use the Quick Print button, the dialog box does not usually and you do not have a choice of printers.

  Take a look at the print dialog box and open the printer options so you can see the printers installed on your computer.  Don't forget to use the printer which doesn't have a 'Fax' in the title.

  Here is a link to the reference and Guide for help on changing the settings.  Click here